Search Results for: Grow tent

CO2 Regulator

CO2 Regulator

A CO2 Regulator helps with CO2 supplementation for your grow area and your plants will love you for it!  CO2 supplementation using CO2 tanks and regulators become necessary when the grow area is too large to be accommodated by other means of CO2 supplementation that are best suited for smaller growing areas, like the average grow tent ( e.g. Yeast and sugar solutions / mycelium generators / compressed CO2 can dispensers, etc. )

There is great benefit to supplementing with CO2 when growing – as plants use the carbon gleaned from CO2 in the air to literally build themselves! ( Read more HERE )

  • Please Note: Our regulators may vary slightly in appearance and specification, depending on availability.
  • IMPORTANT: These types of regulators are NOT made to release gas for extended periods of time ( short bursts of up to around 30 seconds only, with enough time between bursts to allow the regulator to get back to normal temperature ). For LARGE rooms a thermostatically controlled electric heated regulator will be required! An unheated unit will freeze up and cease to operate correctly or trip power supply when it releases gas for extended periods of time / too frequently! If a regulator freezes up – it is either overworked, or faulty. Both of these conditions require urgent attention.
  • HANDY TIP: Apply Soapy water to (pressurized) parts and connections of your system to make sure that there are no leaks present. 

 

These CO2 Regulators are fitted with a 220-volt solenoid which can be turned on and off manually, or using a digital timer. Both of these methods are NOT RECOMMENDED – increasing CO2 levels in the air without CO2 monitors or CO2 controllers CAN BE FATAL! Using a CO2 controller with the regulator is ideal, as the controller’s CO2 sensor will turn the CO2 supply from the tank OFF when the desired ( and still safe for humans ) PPM levels are reached. Growers often like add enrich their room air to concentration of up to 1200 PPM CO2.

CO2 tanks are normally rented or refilled with commercial gas suppliers, e.g. Afrox.

Our regulators have the following minimum specifications:

  • 1.6m length of electrical cord and standard ZA Plug.
  • Max Inlet Pressure: 0-315 bar
  • Electricity Supply: 220V, solenoid 220V
  • Flow Rate: Up to 7 l/min
  • Pressure Gauge: Up to 3500 psi

Terra Aquatica FlashClean

Terra Aquatica FlashClean 2022

Terra Aquatica FlashClean(formerly GHE FloraKleen) is a unique, high performance rinse and soil conditioner for all substrates and systems.

From rejuvenating houseplants to maximizing yields and potential in commercial hydroponics, Terra Aquatica FlashClean is one of the most powerful tools available to gardeners!

Eventually, every growing system will develop fertilizer residue as a natural part of the growing process. This accumulation results in salt build-up that can block drippers, cause unsightly accumulations on the top of soil or substrate, and will eventually cause your plants undue stress and even root damage. With the highly concentrated nutrients available today, and high EC levels running in many systems, nutrient lockout can also be an invisible limit on your grow; Terra Aquatica FlashClean solves all these problems and more:

  • Dissolves accumulated fertilizer salts
  • Corrects nutrient balance
  • Treats nutrient lock out
  • Nourishes microbial life and refreshes soil and coco coir
  • Maximizes final stage growth (especially with Ripen)

Specifically developed to dissolve mineral salts, FlashClean releases nutrient bonds between minerals and substrate and allows you to rinse excess residue. This release also helps plants make the most of remaining fertilizers, especially in the crucial week just before harvest.

Unlike other “flushes” and finishing products on the market, FlashClean is not an acid, isn’t enzyme based, and does not dump magnesium or other mineral additives into your system – this makes it uniquely flexible: with FlashClean you can give your system, and your plants, a clean slate at any time and at any stage of the growth process.

No matter what type of growing system you’re using

– indoors or outdoors, soilless or hydroponic, pots or garden beds, FlashClean is easy to use: just mix with pH adjusted water and apply.

In recirculating hydroponic systems:

  • To reset and refresh before changing nutrients (Inc. before Ripen): Add 1.5 to 3 ml / L of FlashClean to your existing nutrient solution and circulate for 24 hours before draining and replacing with fresh nutrient solution. Use the lower dosage for young or fragile plants, and the higher dosage for established plants / close to harvest.
  • After nutrient burn or lock-out: Drain old nutrient solution, add 1.5 to 3 ml / L of FlashClean to pH adjusted water (you don’t need to use a full tank, just enough to circulate freely and run the system). Circulate for 24 hours before draining and adding new, fresh nutrient solution. Use the lower dosage for young or fragile plants, and the higher dosage for established plants.
  • As a final rinse (after Ripen): Drain old nutrient solution, add 1.5 to 3 ml / L of FlashClean to pH adjusted water (you don’t need to use a full tank, just enough to circulate freely and run the system). Circulate for for the last two days before harvest to increase sugar levels in your crop instead of losing aroma and medicinal content with a long water flush..

In potting soil & soilless mixes including Coco Coir:

  • To reset and refresh before changing nutrients (including before Ripen), and after nutrient burn or lock-out: Every fifteen days (or when needed after lock out etc.): fill a watering can with fresh pH adjusted water and add 1.5 to 3 ml / L of FlashClean. Drench until there is runoff from the bottom of the pot. Resume your regular fertilizer schedule with the next watering. Use the lower dosage for young or fragile plants, and the higher dosage for established plants.
  • As a final rinse / after Ripen: Use 3 ml / L of FlashClean instead of nutrients during the last two days before harvest to increase the sugars level in your crop instead of losing aroma and medicinal content with a long water flush.

NB: FlashClean can be used at any stage of growth or flowering but do not use FlashClean more than once every two weeks.

Use FlashClean with all nutrients and substrates, but above all Ripen

FlashClean helps Ripen work to its full potential. By rinsing residues of nitrogen and other salts out of your substrate, Ripen can get to work more effectively mobilizing nitrates and improving taste in your final crop.

When you’re done, instead of a 10-day flush with water after Ripen, try with FlashClean – growers around the world have, because in commercial production, 8 days per harvest is a big bonus!

Vist the T.A FlashClean page here.

 

Garden HighPro ProCufs

Garden HighPro ProCufs

Garden HighPro ProCufs fit all types of grow tent poles or other overhead beams up to 5cm diameter.

The thick rubbery plastic cuffs with their galvanized iron clips have a hanging capacity up to 84kg/pair!

This is ideal when you need to secure larger grow lights or reflectors, heavy carbon filters, or other heavy equipment from an overhead support.

Sold per pair.

We’ve recently received a lots of great new gear from Garden HighPro and also stock their Prohanger XL Ratchets, Prohanger Regular Ratchets and LightHangers. Having various types of ratchet hangers around is great, as they always come in handy when you are making changes to your grow area or when you are adding new items to it!

  • Ratchets not included

Atami Cocos Substrate

Atami Cocos Substrate

Atami Cocos Substrate is a high quality growing medium comprised of coco fibres extracted from the mesocarp of the coconut. It is a 100% natural product and designed so that it can be used immediately.

The Atami Cocos Substrate is unique in the fact that it is a coco with light fertiliser included, sufficient enough for the 1st week of plant growth. The buffering ensures the grower has optimum control of pH levels. After the first week you can add water with liquid fertilisers and stimulators to gain optimal growing results. Because of the structure of coco, it can store nutrients that are continually available for the plant.

Cocos Substrate is produced under controlled conditions, which is an assurance of quality and offers the ability to use it over and over again after each growing cycle. It can absorb plenty of water in a short period of time and can also deliver water rapidly and abundantly.

The roots also have plenty of available oxygen, which keeps them active. Despite the absence of residual water, there is always enough humidity for the plant.

Coco substrate is light and stable and is one of the best mediums for providing oxygen to the roots of the growing plants. Atami coco substrates are internationally certified by RHP, a foundation whose aim is to optimize the quality of growing mediums.

The coconut fibres have been washed, steamed and buffered to ensure that the substrate is free from any pathogens and unwanted elements, giving an optimum growing substrate that is suitable for both seeds and cuttings.

  • Airy structure
  • High quality coco
  • Optimal root development

Available in bags of 50L.

Produced in The Netherlands.

Specifications:

  •  Ingredients – coconut fibers, mineral lime, calcium nitrate and NPK fertilizer 11-27-8
  • pH 6.0
  • EC (1: 1.5 H2O VV) & lt; 1.75 mS / cm
  • Organic matter> 85%
  • Moisture content <85%
  • 50l
  • Air volume 20%

EHG Tripaks (3 x 500ml)

EHG Tripaks (3 x 500ml)

EHG Tripaks (3 x 500ml) are convenient and complete 3-part nutrient starter kits that provide perfect nutrient combinations for every stage of your plants’ development. Simply follow the simple grow chart set out on the detailed instructions in the EHG (Easy Hydro Grow) nutrient guide.

Everything your plants will need to grow optimally either hydroponically or in substrates from seedling to flowering.

Both types of EHG Tripaks (3 x 500ml) include a “Grow” part and a “Bloom” part, but the “Micro” part differs between the sets…

The “Regular Micro” Tripak can be used in hydroponic and aeroponic systems, as well as for general feeding for plants in soils and substrates, but the “COCO Micro” Tripak includes a “Coco Micro” part, which is specifically formulated for use with Coco Coir / Coco Peat substrates.

The COCO Micro has increased calcium and magnesium and lower potassium to compensate for the fact that coco is organic and not inert. Coco absorbs calcium and magnesium and releases potassium which can lead to problems over time.

If using borehole water, one should stick to ordinary micro because borehole water is high in calcium and magnesium.

Read more about EHG and plant nutrition HERE.

Mineral Content:

Grow Contains: Nitrogen N 22.5g/kg, Phosphorus P 7.8g/kg, Potassium K 40g/kg, Sulphur S 3,3g/kg, Magnesium Mg 6,9g/kg,

REGULAR Micro Contains: Nitrogen N 50.3g/kg, Potassium K 16.7g/kg, Calcium Ca 52,7g/kg, Zinc Zn 117.7mg/kg, Copper Cu 13mg/kg, Molybdenum Mo 6,5mg/kg, Iron Fe 957mg/kg, Boron B 242mg/kg, Manganese Mn 242mg/kg

COCO Micro Contains: Nitrogen N 50.7g/kg, Calcium Ca 58g/kg,  Magnesium Mg 4.2g/kg, Zinc Zn 77mg/kg, Copper Cu 12mg/kg, Molybdenum Mo 9,9mg/kg, Iron Fe 1045mg/kg, Boron B 242mg/kg, Manganese Mn 220mg/kg

Bloom Contains: Nitrogen N 9.9g/kg, Phosphorus P 25,3g/kg, Potassium K 47,4g/kg, Magnesium Mg 12,9g/kg

Store in a cool dry place.

  • Shake well before use
  • Do not mix formulas together while in concentrated form.
  • Place each component separately into feeding reservoir.

EHG – Proudly produced in South Africa…

EHG is South Africa’s first multi-part liquid hydroponic nutrient. The formulations are ideal for local conditions and  results far surpass those of overpriced imported products.
GROW, MICRO, COCO MICRO, BLOOM and RIPENER are made from the purest mineral salts so they are rapidly absorbed by  plants. Multi-part liquid hydroponic fertilizer formulations like EHG have become the preferred choice worldwide.
Extremely easy to use, easy to measure and mix instantly.
EHG is the perfect choice for aeroponic, bubble-ponics, nutrient film, flood and drain and top fed hydro systems. It is also excellent for soil which is recommended for inexperienced growers. By following the simple nutrient guide, the perfect nutrient ratios are provided for every stage of your plant’s growth.

For growers using COCO COIR, COCO MICRO is the only COCO specific nutrient manufactured in South Africa.

Nitrosol Organiksol

Nitrosol Organiksol

Nitrosol Organiksol – the organically based plant food “with the orange cap!” Organiksol is environmentally safe, readily absorbed by plants, and is recommended for all indoor and outdoor foliage and flowering plants.

Dilute 1 cap (10ml) into 3 liters of water and feed once every 14 days. More frequent doses can be administered if your plants are larger, or are feeding more heavily.

Nitrosol Organiksol Composition:

N: 80 g/kg
P: 20 g/kg
K: 58 g/kg
Mg: 7 g/kg
Ca: 6 g/kg
S: 4 g/kg
Fe: 60 mg/kg
Cu: 1 mg/kg
Mn: 40 mg/kg
B: 23 mg/kg
Mo: 15 mg/kg

Growth Stimulants:
Gibberellic Acid (3 mg/kg),
Sterilized Blood Bone and Carcass Meal

Gibberellic acid, a naturally occurring plant hormone, serves as a potent growth stimulant, particularly for enhancing stem elongation and seed germination. By influencing cell division and elongation, it facilitates rapid growth in plants, making it a valuable tool in agricultural and horticultural practices. Applied externally, typically through foliar spraying or soaking seeds, Gibberellic acid promotes elongation of stems, resulting in taller plants with increased internodal spacing. Moreover, it can break seed dormancy, leading to more uniform and synchronized germination. However, precise dosage and timing are crucial, as excessive application can lead to undesirable effects such as excessive stem elongation or abnormal growth patterns. Nonetheless, when used judiciously, Gibberellic acid proves to be an effective tool for boosting plant growth and development.

Manganese (Mn), Boron (B), and Molybdenum (Mo) play critical roles in plant nutrition, despite being required in relatively small amounts. Manganese aids in photosynthesis, enzyme activation, and nitrogen metabolism, ensuring healthy plant growth and development. Boron is essential for cell wall formation, pollination, and seed production, contributing to overall plant vigor. Additionally, Boron aids in the uptake of other nutrients, making it indispensable for nutrient utilization efficiency. Molybdenum is crucial for nitrogen fixation in legumes and assists in enzyme activation involved in nitrogen metabolism, ultimately influencing protein synthesis. While these micronutrients are required in trace amounts, their absence or deficiency can lead to significant yield losses and impaired plant function. Thus, ensuring adequate availability of Manganese, Boron, and Molybdenum in plant feeding regimes is vital for optimizing crop productivity and quality.

 

Oscillating Clip Fan

Oscillating Clip Fan

This Oscillating Clip Fan with its 150 mm fan diameter housed inside a 220 mm mesh enclosure creates great airflow around your plants. The fan has an oscillating function that rotates it side to side for 90 degrees, so that the fan doesn’t bump against the sides of your grow tent. The Oscillating Clip Fan can also be adjusted upwards or downwards to customize your circulation.

The Clip Fan body is mounted on a very sturdy mounting clip and the fan body can be swiveled from side to side on the mounting clip to make installation very easy.

It comes with 2 speeds and creates a lot of air movement, even on the slower setting!

The fan is sold with a standard South African plug and comes with a 1.5 m long cord – no extra wiring required.

Having good airflow around your plants has many benefits: It makes them grow up stronger, able to transport nutrients better, more resistant to pests, diseases and molds, helps with plant respiration and leaf temperature, and also helps prevent airy and loose flower clusters.

Don’t forget to give your plants a wind “break” every now and again ; ) 

Switch off fan for a few hours a day (preferably in the night cycle) to give your plants a Wind “break”. Your plants need a nap time and so does the fan.

Garland Standard Garden Tray

Garland Standard Garden Tray

Garland Standard Garden Tray – The smallest in Garland’s range of tough injection molded garden trays. An ideal water reservoir tray for pots and seed trays.

9 Liter internal capacity, made from recycled polypropylene.

Size: 57cm Long x 38.5cm Wide x 5cm High (External)

Garland Standard Garden Tray 2

A Garland Standard Garden Tray can come in handy for a number of uses, including:

  • Microgreen cultivation
  • Decompressing small coco coir bricks
  • Mixing small amounts of custom substrates and additives together
  • Can be used as a bin when trimming plants, especially in a grow tent, where space may be limited
  • Use as watering tray with an Easy2Go self-watering kit
  • Can be used to catch runoff when flushing or watering potted plants
  • Can be used to water seedling trays from underneath, so that newly germinated seedlings don’t get pushed over by water from above

Garland garden trays are also available in various larger sizes:

  • 1.2 Meter Square Tray
  • 1 M Square Tray
  • 80 cm Square Tray
  • 60 cm Square Tray
  • Rectangle Tray (100cm Long, 40cm Wide, 5cm High)
  • Giant Plus Tray 1.2m x 55cm x 5cm
  • Titan Tray (Dimensions, external (lip included): 100cm Long, 55cm Wide, 15cm High)

Although the trays can be used for many reason, they are most commonly used as drip/catchment trays or hydroponic grow beds (filled with clay balls) when gardening is concerned.

 

CANNA Coco Professional Plus

CANNA Coco Professional Plus

CANNA Coco Professional Plus is a coco-based growing medium that offers the gardener and his plants many advantages in comparison with other substrates:

  • A pure, organic product with a homogeneous structure and has had a full buffering, eliminating the side effects of growing on coir, as coir could consume some of the nutrients.
  • Free of harmful viruses and soil diseases, thanks to CANNA’s unique production process.
  • A complex water/air system that provides the ideal conditions for growing plants.
  • Can be used a number of times and makes an excellent potting mix improver after use.
  • Contents 50 L

R.H.P. quality

CANNA Coco Professional Plus consists of 100% coco flakes. Specially selected prime Indian coconuts form the base for this substrate. Not touching the outdoor ground in the complete production process ensures the end product is free of weeds or soil diseases. Washed in fresh water means no salts are present. This makes it the best growing medium of the future.

The production process is subject to strict quality controls so we can vouch for this product’s quality.

The substrate carries the strictest R.H.P. quality mark (Richtlijn Hollandse Potgronden). Actually, the quality of this product goes well beyond the R.H.P. standard. In short, the R.H.P. quality mark means that the product is free of weeds. The R.H.P. inspection is not limited to the finished product but covers the sourcing and processing of raw materials all the way to the bag.

CANNA’s buffering process allows us to ‘pre-program’ the medium to a certain age. This ensures you get the same consistent, high quality material time after time.

CANNA Coco Professional Plus – Directions for Use:

This top quality coco product that more than meets the strictest RHP standards. It distinguishes itself from other coco substrates by using first class raw materials and having optimum structure and purity. Consists of 45% wood cellulose which ensures that the physical characteristics are retained for a long time. The water/air ratio is 73%/23%. A special procedure is also followed for rinsing and buffering the coco flakes which is tuned to the needs of plants. This is necessary for achieving ideal growing conditions in the substrate so that the plant can develop optimally from the start of cultivation.

User Instructions

Use pots of at least 5 liters. The larger the pot the more constant the root environment will be.

If you use CANNA Coco Professional Plus in combination with the fertilizers from CANNA’s COCO range designed for this purpose, then you are investing in quality and certainty!

 

Black White Panda Plastic Sheet

Black/White Plastic Sheet

Black/White Plastic Sheet, or panda film as it is often called, is black on one side and a 90 percent reflective white on the other side allowing light to be reflected back to your plants where it belongs. Panda film is an inexpensive reflective material for grow room walls or green house barriers or floors.

Use Black/White Plastic Sheet to reflect light and also prevent mold and algae growth on walls. Panda Film can provide a light proof barrier for partitioning rooms, covering hydroponic grow media, waterproof flooring, making reservoir covers or a variety of other gardening uses.

BENEFITS:

• Long lasting in exposed sunlight.

• Good general purpose exterior covering sheet.

SPECS:

• Blended LDPE material (Low-density polyethylene)

• UV stabilised.

• Reasonable tear and puncture resistance.

Thickness: 150 micron

Applications:

  • Structure covering ( ex: warehouse storage areas)
  • Growing system / storage privacy
  • Aquaponic float bed liner
  • Darkening and shading plants to prolong dormancy and promote flowering
  • Weed barrier for orchards and row crops
  • Greenhouse blackouts
  • Overwinter protection

Designed with a black side and a white side, this strong, waterproof blackout film is uniquely suited to applications such as weed control, greenhouse blackout, indoor growing tents, overwinter plant protection, and privacy.

Use to line growing areas or cover ground around plants with the black side down. Deprive weeds of sunlight while reflecting ambient light back onto the plants.

Atami High Porosity Cocos

Atami High Porosity Cocos

Atami High Porosity Cocos growing medium consists of high-quality aged, washed, buffered and adeptly fertilized coco, with the added benefit of the airiness of perlite.

The availability of air is vital for your crops’ root development. Roots need to breathe, as an airy substrate results in the production of more root hairs.  The oxygen is required to process sugars into energy. Using this energy, the roots can expand and actively supply more nutrients to the rest of your crop.

This is why it is essential that a substrate offers a high air percentage. Any airy substrate provides proper drainage and a continuous air supply.

The Atami High Porosity Cocos is unique in the fact that it is a coco with light fertiliser included, sufficient enough for the 1st week of plant growth. The buffering ensures the grower has optimum control of pH levels. After the first week you can add water with liquid fertilisers and stimulators to gain optimal growing results. Because of the structure of coco, it can store nutrients that are continually available for the plant.

Atami growing mediums are internationally certified by RHP, a foundation whose aim is to optimize the quality of growing mediums.

The coconut fibres have been washed, steamed and buffered to ensure that the substrate is free from any pathogens and unwanted elements, giving an optimum growing substrate that is suitable for both seeds and cuttings.

  • Airy structure
  • High quality coco
  • Optimal root development

Available in bags of 50L.

Produced in The Netherlands.

Specifications:

  •  Ingredients – coconut fibers, mineral lime, calcium nitrate and NPK fertilizer 11-27-8
  • pH 6.2
  • EC (1: 1.5 H2O VV) & lt; 1.5 mS / cm
  • Organic matter> 45%
  • Moisture content <80%
  • 50l
  • Air volume 30%

Atami Hydro Rokz Cocos 60-40

Atami Hydro Rokz Cocos 60-40

Atami Hydro Rokz Cocos 60-40 offers many benefits of growing. The clay pebbles provide excellent drainage as they retain nearly no water! This decreases the risk of over-watering. When the water is drained, fresh air enters the root zone and gives this substrate a high air ratio, for optimal root development!

The coco in the Atami Hydro Rokz Cocos 60-40 increases the water retention of the substrate. The Coco offers a buffer between watering times, making sure moisture levels near the roots stay stable. And, it holds on to some nutrients as well!

Atami Hydro Rokz Cocos 60-40 is the most suitable growing medium for our Autopot Systems.

Atami growing mediums are internationally certified by RHP, a foundation whose aim is to optimize the quality of growing mediums.

The coconut fibres have been washed, steamed and buffered to ensure that the substrate is free from any pathogens and unwanted elements, giving an optimum growing substrate that is suitable for both seeds and cuttings.

  • Airy structure
  • High quality coco
  • Optimal root development

Available in bags of 45L.

Produced in The Netherlands.

Specifications:

  •  Ingredients – lightweight expanded clay and coco fibres
  • pH 6.0
  • EC (1: 1.5 H2O VV) & lt; 0.5 mS / cm
  • Organic matter> 15%
  • Moisture content <45%
  • 45l
  • Air volume 35%

Because Nature Mycelium CO2 Generator

Because Nature Mycelium CO2 Generator

Because Nature Mycelium CO2 Generator utilizes Shiitake mushroom mycelium to generate additional CO2 for your grow area for months. Inside your bag is a living Mycelium culture growing on a sawdust substrate. Just like us humans Mycelium inhales O2 and exhales CO2 . This is great news as C02 is a vital gas your plant requires to be able to photosynthesize. 

Because Nature Mycelium CO2 Generator Large bag should provide enough additional CO2 for a 1.8 m x 1.8 m x 1.8 m area for 4 months.

Because Nature Mycelium CO2 Generator Small bag should provide enough additional CO2 for a 1.8 m x 1.8 m x 1.8 m area for 2 months.

The Mycelium in your bag will consume the O2 waste from your plant and in exchange produce CO2 for your plants, allowing them to photosynthesize at their best.

All you need to do is place your Mycelium bag in your indoor grow room / tent (for best results hang your bag just above plant height) and the Mycelium will start doing the work for you. 

Over time the bags will fully colonize, giving off CO2 for your plants all along the way.

Bags should always kept clean, be handled carefully, and never opened or punctured during colonization. The white fabric breather filter should be kept clean and dry, to prevent potential contamination of the substrate.

LIFE CYCLE OF A MYCELIUM GENERATOR:

  • Bags are inoculated ( production date )
  • Mycelium is allowed to colonize the substrate for up to 2 weeks, before the bags are refrigerated, to drastically slow down their development.
  • The substrate will firstly become fully covered with fine, feathery mycelium.
  • The mycelium will then develop round white masses all over the outside of the substrate, resembling popcorn.
  • This will turn from white, to beige, to brown, to almost black over time.
  • When the mass reaches this almost black appearance, it is recommended to replace the bag.
  • The Shiitake mushroom substrate CAN also be fruited once fully colonized, and after harvesting the remaining mycelium can be mixed into your other organic growing mediums.

If not using straight away, store in fridge to stop the Mycelium growth. When ready to use, place in grow area.

BioBizz Acti Vera

BioBizz Acti Vera 2022

BioBizz Acti Vera contains a Potent Source of Natural Enzymes. Boost the immune systems of your plants and improve nutrient uptake with BioBizz’s concentrated Aloe-Vera formula. By harnessing the power of this highly revered succulent, you’ll make your crop more resistant to a wide array of stress factors, such as environmental issues, pests and diseases, while also speeding up growth rates.

All BioBizz products encourage beneficial microbial activity in the root-zone. This increases yield and root-health.

  • Contains an array of enzymes that break down dead materials, turning them into available foods
  • Fortifies plants’ immune systems, increasing their resistance to pests and diseases
  • Contains ingredients that act as surfactants, giving Acti-Vera the properties of a wetting agent
  • Classed as an ‘organic botanical activator’
  • Speeds up growth rates and enhances overall vibrancy and vigour
  • Effective in any medium or system, not just soil
  • Delivers great results indoors and outdoors
  • Makes an excellent foliar spray
  • Speeds up metabolic rates, making better use of any other nutrients that you add in
  • Helps to prevent root disease
  • Improves germination rates for seeds
  • Certified as fully organic and 100% vegan-friendly

How Acti-Vera Works

The Aloe Vera plant is an evergreen perennial succulent that has been revered for thousands of years for its incredible life-giving properties. As it turns out, Aloe Vera is as good for plants as it is for people! It contains an array of enzymes that help to break down dead materials and make them available to plants as food, while creating a harmonious environment for beneficial bacteria and fungi. Add it to your feeding routine and you can expect to see an overall increase in health and vitality, with improved growth rates and a heightened level of resistance to stress. Your plants will be better equipped to deal with issues like pest infestations, root diseases and negative changes in the environment. Aloe Vera also contains ingredients that act as surfactants, making Acti-Vera an excellent wetting agent. Wetting agents work by lowering the surface tension of liquids, allowing them to penetrate substrates more effectively and making foliar sprays more potent.

How to Use Acti-Vera

When growing with the rest of the BioBizz range, Acti-Vera can be added to your feeding regimen at the same rate, regardless of whether you pot-up with Light-Mix or All-Mix. Often, dosages are different depending on the starting level of fertiliser contained in the medium.

Use it at a rate of 2-5ml per litre of nutrient solution. Acti-Vera can be added right the way through the grow and bloom phases, finishing

Acti-Vera also makes an excellent foliar spray when used at a rate of 5ml per litre of water.

NPK: 0 – 0 – 0

Storage instructions: Store all your Biobizz products in a cool, dry, dark place (away from direct sunlight) with low humidity and an average (room) temperature of 18 degrees. Don´t store them in the fridge.

Green House Powder Feeding – Bio Starter Kit

Green House Powder Feeding – Bio Starter Kit pic 2

The Green House Powder Feeding – Bio Starter Kit includes: BioEnhancer: 125g, BioGrow: 500g, BioBloom: 500g.

The Bio Starter Kit contains of everything you need for a successful organically grown crop and it’s enough for 100-150L of substrate. The best deal for the aspiring organic gardener, who wants to give the Green House Feeding Bio Line a try.

How to use Bio-feeding by Green House: Click HERE

BioEnhancer is the key to getting an explosive, vigorous, productive and flavorful crop. It contains algae extract, humic acids, mychorrhizae, Bacillus Subtilis and no NPK. The main purpose Green House Powder Feeding – BioEnhancer is to increase your plants’ vitality, increasing available nutrients and bringing important bacterial life to your soil. The plants’ roots live in a sort of symbiosis with the fungi in this product, which “colonize” your plants, creating a protective barrier between your plants and other fungi that want to attack them.

BioGrow is an all-in-one bio fertilizer in powder form, formulated specifically for the vegetative growth of all plants. All essential nutrients are provided by the natural-minerals and organic raw materials. Green House Powder Feeding – BioGrow is suitable for biological agriculture. Natural mineral nutrients are immediately available for the plant and the organic nutrients are released slowly after being decomposed by microorganisms in the soil. The beneficial fungus and bacteria in BioGrow improve the microbial activity of the soil by supplying components that form humus. This process depends on the conditions of the soil (e.g. humidity, temperature, pH-value, microbial activity, organic matter content, etc.)

BioBloom is an all-in-one bio fertilizer in powder form, formulated specifically for the flowering stage of all plants. All essential nutrients are provided by the natural minerals and organic raw materials. Green House Powder Feeding – BioBloom is suitable for biological agriculture. Natural-minerals nutrients are immediately available for the plant and the organic nutrients are released slowly after being decomposed by microorganisms in the soil. The beneficial fungus and bacteria in BioBloom improve the microbial activity of the soil by supplying components that form humus.

Get your Green House Powder Feeding – Bio Starter Kit today!