Search Results for: Grow tent

BudBox PRO White XXL-HL 1.2m x 2.4m x 2.2m

BudBox PRO White XXL-HL 1.2m x 2.4m x 2.2m

BudBox PRO White XXL-HL 1.2m x 2.4m x 2.2m: The Budbox HL range features tents that are 20cm higher than the standard Budbox ranges, with all of the features that make Budbox tents the most trusted name in the indoor grow tent market.

  • BudBox Pro – superbly designed and constructed, premier grow tents
  • Pro White material offers class leading PAR results
  • Strong, powder-coated 16mm steel framework
  • Metal, click-lock connectors for enhanced structural strength and long-term stability
  • Creates a sealed area that locks in light, smells and sounds
  • Tough, thick, durable yet lightweight outer shell that’s easy to fit in minutes
  • Features a green tinted viewing window, to keep a close eye on your growing environment without unzipping the door
  • Intake and extraction ports with tightening drawstrings attached, large enough for acoustic ducting
  • Military-grade, high-quality zips
  • Large ventilation panel/s for increased passive air flow

Budbox silicon sleeves

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat their poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look.

Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

White vs Silver

Get your BudBox PRO White XXL-HL 1.2m x 2.4m x 2.2m today!

BudBox PRO White XL Plus-HL 1.5m x 1.5m x 2.2m

BudBox PRO White XL Plus-HL 1.5m x 1.5m x 2.2m

BudBox PRO White XL Plus-HL 1.5m x 1.5m x 2.2m: The Budbox HL range features tents that are 20cm higher than the standard Budbox ranges, with all of the features that make Budbox tents the most trusted name in the indoor grow tent market.

  • BudBox Pro – superbly designed and constructed, premier grow tents
  • Pro White material offers class leading PAR results
  • Strong, powder-coated 16mm steel framework
  • Metal, click-lock connectors for enhanced structural strength and long-term stability
  • Creates a sealed area that locks in light, smells and sounds
  • Tough, thick, durable yet lightweight outer shell that’s easy to fit in minutes
  • Features a green tinted viewing window, to keep a close eye on your growing environment without unzipping the door
  • Intake and extraction ports with tightening drawstrings attached, large enough for acoustic ducting
  • Military-grade, high-quality zips
  • Large ventilation panel/s for increased passive air flow

Budbox silicon sleeves

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat their poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look.

Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

White vs Silver

Get your BudBox PRO White XL Plus-HL 1.5m x 1.5m x 2.2m today!

BudBox PRO White XL-HL 1.2m x 1.2m x 2.2m

BudBox PRO White XL-HL 1.2m x 1.2m x 2.2m

BudBox PRO White XL-HL 1.2m x 1.2m x 2.2m: The Budbox HL range features tents that are 20cm higher than the standard Budbox ranges, with all of the features that make Budbox tents the most trusted name in the indoor grow tent market.

  • BudBox Pro – superbly designed and constructed, premier grow tents
  • Pro White material offers class leading PAR results
  • Strong, powder-coated 25mm steel framework
  • Metal, click-lock connectors for enhanced structural strength and long-term stability
  • Creates a sealed area that locks in light, smells and sounds
  • Tough, thick, durable yet lightweight outer shell that’s easy to fit in minutes
  • Features a green tinted viewing window, to keep a close eye on your growing environment without unzipping the door
  • Intake and extraction ports with tightening drawstrings attached, large enough for acoustic ducting
  • Military-grade, high-quality zips
  • Large ventilation panel/s for increased passive air flow

Budbox silicon sleeves

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat their poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look.

Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

White vs Silver

Get your BudBox PRO White XL-HL 1.2m x 1.2m x 2.2m today!

BudBox PRO White TITAN 2-HL 3.6m x 2.4m x 2.2m

BudBox PRO White TITAN 2-HL 3.6m x 2.4m x 2.2m

BudBox PRO White TITAN 2-HL 3.6m x 2.4m x 2.2m: The Budbox HL range features tents that are 20cm higher than the standard Budbox ranges, with all of the features that make Budbox tents the most trusted name in the indoor grow tent market.

  • BudBox Pro – superbly designed and constructed, premier grow tents
  • Pro White material offers class leading PAR results
  • Strong, powder-coated 16mm steel framework
  • Metal, click-lock connectors for enhanced structural strength and long-term stability
  • Creates a sealed area that locks in light, smells and sounds
  • Tough, thick, durable yet lightweight outer shell that’s easy to fit in minutes
  • Features a green tinted viewing window, to keep a close eye on your growing environment without unzipping the door
  • Intake and extraction ports with tightening drawstrings attached, large enough for acoustic ducting
  • Military-grade, high-quality zips
  • Large ventilation panel/s for increased passive air flow

Budbox silicon sleeves

BudBox™ is still the ONLY grow tent that takes the time and care to powder coat their poles and connectors, delivering the best possible anti-corrosion protection and a very clean and reflective look.

Let’s talk about light. You plants need PAR light to grow and flower. PAR is an acronym for Photosynthetic Active Radiation; plants love the blue and red light from 400 to 750nm. Blue light tends to help the plants grow strong leaves and stems and the red part helps with flowering. BudBox™ Pro–White models reflects more PAR than Mylar material and at the same time reduce troublesome hot spots (concentrated heat energy) and, as such, will always the professional’s choice when it comes to horticulture. Not only is the flat white material reflecting more PAR light directly to your plants it reflects less of the overall unused spectrum. With light energy comes heat energy and the Pro-white lining will always run cooler than a standard Mylar tent. The Mylar material will reflect more heat energy, therefore, will run hotter (around 6-8degC) as such, the these units require greater ventilation, or the use of less powerful lighting, so the environment does not overheat and damage your plants.

White vs Silver

Get your BudBox PRO White TITAN 2-HL 3.6m x 2.4m x 2.2m today!

Green House Powder Feeding – Grow

Green House Powder Feeding - Grow

Green House Powder Feeding – Grow is specifically designed  for the vegetative growth-stage of all plants.

PLEASE USE IN CONJUNCTION WITH GREEN HOUSE POWDER FEEDING CALCIUM FOR OPTIMAL RESULTS.

  • Its formula provides optimum development throughout the growth-stage to obtain greener, stronger and more resistant plants.
  • Grow faster, greener and more vigorous than ever.
  • Ideal for the production of cuttings.
  • The easy assimilation of nutrients and the high Nitrogen content provides plants with a more robust and branched structure.
  • The great thickness of the leaves accumulates more reserves, stimulating rapid rooting of cuttings.
  • Green House Powder Feeding can be used on every medium.

Ideal for:

  • Lettuce
  • Ficus Benjamina
  • Azaleas
  • Erica Carnea
  • All kinds of young and herbaceous plants

Packet Sizes: 1Kg and 500g

The feeding schedule is slightly different and if using anything than soil we recommend using a PH- and EC-meter in order to achieve the desired values and have full control over your feeding solution.

Easy Grower

If you grow on pre-fertilized soil we recommend starting using Powder Feeding 2-4 weeks after planting the seeds and to start with a mild solution (0.25g per Liter).

During the vegetative stage you can increase the feeding up to 0.5g per Liter.
With the beginning of the flowering stage you should slowly increase the amount of Powder Feeding until you reach 1g per Liter.

Following this schedule, there should usually be no problem and growers will achieve a good yield.

Experienced Grower

Experienced growers usually measure their feeding solution to provide the plants with the exact amount of nutrients and the correct pH value of the solution.

Whether you grow in coco, hydroponics or aeroponics – with all of these systems you should measure your pH and EC values.

When using a pH and EC meter you can optimize your growing and achieve much better results.

Steps of mixing nutrient solution:

1. a) Check pH and EC value of the water and make sure the temperature is about 18-22 degrees Celsius. You should also check if your water contains enough Calcium.

1. b) If your EC is 0,0 (using RO or rain water) you need to add Calcium to your water before adding Powder Feeding. Make sure your EC rises up to 0.3-0.4 EC

2. Add Powder Feeding and mix well for 2-3 minutes, and then measure the EC value. If necessary repeat until you reach the desired value.

3. When you reached the desired EC value, wait for 15-30 min.

4. Then measure the PH and if necessary adjust it using PH up or PH down – mix good for 2-3 minutes and wait again 15-30 minutes before measuring.

5. When you reached the desired values, feed your plants.

To keep every dose accurate our 10 gr. dosage spoon is INCLUDED!
You can find our recommended feeding schedule here:

COMPOSITION

N-P-K-Mg: 24+6+12+(1.2)

CONCENTRATION OF ELEMENTS

  • 24%      N Total Nitrogen
  • 13%      NS Nitrogen Nitrate
  • 11%      NA Nitrogen Ammoniacal
  • 6%        P2O5 Nitrogen Phosphorus
  • 12%      K2O Soluble Potassium
  • 2.0%     MgO Soluble Magnesium
  • 0.02%   B Soluble Boron
  • 0.04%   Cu Soluble Copper (as Chelate form EDTA)
  • 0.1%     Fe Soluble Iron (as Chelate form EDTA)
  • 0.05%   Mn Soluble Manganese (as Chelate from EDTA)
  • 0.01%   Mo Soluble Molybdenum
  • 0.01%   Zn Soluble Zinc (as Chelate from EDTA)

DILUTION PROPORTIONS

Concentration gr./Lt. 0.5 1 1.5 2
EC (mS) 1 1.4 2 2.6

These values are calculated starting from tap water at medium hardness with EC 0.0

1.2 Meter Square Tray

1.2 Meter Square Tray

1.2 Meter Square Tray is the largest in our range with a depth of 12 cm and a massive internal capacity of 144 Litres. The 1.2 Meter Square Tray features a series of shallow horizontal ridges on the internal base of the tray which aid drainage from plant pots.

Equally useful as a commercial drip / spillage tray for oils and chemical storage. There are many potential other applications such as a sand pit for kids, a plant irrigation display tray for garden centres and a mixing tray for cement to name but a few. Trays of this size and strength are very hard to find.

Garland trays are popular when used by private and commercial gardeners alike, as a large irrigation table for keeping a multitude of potted plants watered. Garland trays can be filled with growing medium or capillary matting if preferred. A series of shallow horizontal ridges feature on the internal base of the tray which can aid drainage.

How The Garland Tray Works:

The sturdy plastic tray with lipped sides works as a catch-container for liquids and mediums. Garland Trays are easy to drill for DIY adaptation.

Using the DIY / Run-off Tray:

A Garland Tray can be placed underneath your plant-pots as an alternative to using individual saucers underneath each pot. Garland Trays can be used at the bottom of a grow-tent or grow-space to catch accidental spills or to prevent water-damage should a leak occur in your hydroponic system. Can also be used for a Flood and Drain system.

Made from recycled polypropylene.

Size: 120cm Long, 120cm Wide, 12cm  High External

PLEASE NOTE:

A 1.2 m tray WILL fit into a 1.2 m x 1.2 m MARS HYDRO grow tent, as the tray has rounded corners, that will accommodate the small diameter tent frame uprights.

A 1.2 m tray WILL NOT fit into a 1.2 m x 1.2 m BUDBOX PRO grow tent, as these tents have thicker tent frames – too big for the tray’s little rounded corners

 

Giant Plus Tray 1.2m x 55cm

giant plus garden tray

This tray has proved popular when used by private and commercial gardeners alike as a large irrigation table for keeping a multitude of potted plants watered.

The tray can be filled with grit or capillary matting if preferred. Its sheer size means that by simply filling the tray with a depth of water, a large number of plants can be watered in minimal time. The internal capacity is 28 Litres. A series of shallow horizontal ridges feature on the internal base of the tray which can aid drainage. The tray will fit perfectly on most greenhouse staging and also fits neatly on to commercial ‘Danish Trolley’ shelves.

Equally useful as a commercial drip / spillage tray for oils and chemical storage. There are many potential other applications such as a sand pit for kids, a plant irrigation display tray for garden centres and a mixing tray for cement to name but a few. Trays of this size and strength are very hard to find.

Garland trays are popular when used by private and commercial gardeners alike, as a large irrigation table for keeping a multitude of potted plants watered. Garland trays can be filled with growing medium or capillary matting if preferred. A series of shallow horizontal ridges feature on the internal base of the tray which can aid drainage.

Size : 120cm Long, 55cm Wide, 5cm High

How The Garland Tray Works:

The sturdy plastic tray with lipped sides works as a catch-container for liquids and mediums. Garland Trays are easy to drill for DIY adaptation.

Using the DIY / Run-off Tray:

A Garland Tray can be placed underneath your plant-pots as an alternative to using individual saucers underneath each pot. Garland Trays can be used at the bottom of a grow-tent or grow-space to catch accidental spills or to prevent water-damage should a leak occur in your hydroponic system. Can also be used for a Flood and Drain system.

Made from recycled polypropylene.

PLEASE NOTE:

A 1.2 m tray WILL fit into a 1.2 m x 1.2 m MARS HYDRO grow tent, as the tray has rounded corners, that will accommodate the small diameter tent frame uprights.

A 1.2 m tray WILL NOT fit into a 1.2 m x 1.2 m BUDBOX PRO grow tent, as these tents have thicker tent frames – too big for the tray’s little rounded corners.

Messenger Natural Plant Health Promoter and Growth Stimulator

Messenger Natural Plant Health Promoter and Growth Stimulator

Messenger Natural Plant Health Promoter and Growth Stimulator.

Active Ingredient – Harpinαβ Protein. SOLD IN 15 gram bottles.

  • Stimulates Root, Flower and Fruit growth.
  • Improves disease resistance using natural chemical processes.
  • Causes a systemic action within the plant, resulting in a full-plant response.

How Messenger Natural Plant Health Promoter and Growth Stimulator Works:

Plants develop receptors on their seeds, roots and foliage to detect the presence of Harpin Proteins which are produced in nature by certain bacterial plant pathogens. The presence of Harpin Proteins trigger an “early warning system” in the plant, activating its defense genes, boosting the plan’s disease resistance and stimulating accelerated growth.

1. RECEPTION
When Messenger is sprayed onto the plant, it binds to the natural Harpin receptors. These early-warning receptors react as if Messenger is a bacterial pathogen attacking the plant.

2. TRANSDUCTION
Within minutes, this stimulates the plant to activate its defense systems. Messenger amplifies the natural growth processes, resulting in increased nutrient uptake, photosynthesis, vigor and reproductive responses. The stress-defense response increases plant tolerance to stress caused by the environment, physiological shifts in plant growth and biological agents such as disease pathogens. Environmental stresses are drought, heat, hail, frost and flooding.

3. RESPONSE
These reactions activate both innate growth and stress-defense pathways within the plant, resulting in healthier, stronger crops that are characterized by better tolerance to stress conditions, better growth and increased production.

The effects of using Messenger Natural Plant Health Promoter and Growth Stimulator

Calcium levels outside the plant cell are typically 1000 times higher than inside the cell. Messenger can induce a calcium flux within minutes after application, allowing higher levels of calcium to flow
into the cell.

NORMALLY A PLANT ONLY INDUCES THIS RESPONSE WHEN UNDER ATTACK. MESSENGER IS UNIQUE IN ITS ABILITY TO ACTIVATE CALCIUM MOVEMENT.

The calcium content of the plant cell is separated into ‘free’ and ‘bound’ calcium. The concentration of cytosolic free calcium is maintained at low levels because of the signaling nature of calcium. Calcium is a macro-element nutrient; it can also be referred to as a plant hormone. Calcium works similarly to adrenaline in humans- it is held in low concentrations and only elevated when under attack.

Yield increases of 10-30% are possible

Directions for use :

  • Not advised for use on sickly plants
  • Foliar Spray Only (fine mist spray not drench)
  • 0.5 g / Per Liter water. If you have white burns, use less Messenger.
  • Apply every 2/3 weeks until 2 weeks before harvest.
  • Apply directly after mixing.
  • Shelf Life: 3-5 years if kept sealed in a cool, dry place.

Messenger has won and Environmental Protection Agency award.

 

Growbiz Solutions LiquiCompost

Growbiz Solutions LiquiCompost

Growbiz Solutions LiquiCompost is a PhytoFulvic acid chelated nitrogen (N), phosphorous (P} and potassium (K} and micro-nutrient product that is totally soluble in water. LiquiCompost improves the uptake of nutrients due to the chelating properties of the fulvic acid and promotes quicker germination and faster root and shoot growth. The fulvic acid and Kelp content also stimulates soil microbial activity. Contains Ecklonia Kelp to support cell division and mobility of the nutrients in the plant and lateral root growth.

LiquiCompost is to be used for the seedling and the Vegetative growing stages of the plant.

The plant extracted Phytofulvic acid used in Growbiz Solutions LiquiCompost has strong wetter/spreader and re-wetter characteristics due to its hygroscopic (water loving) nature. The wetting capability is directly related to its water dispersing qualities (soapiness) to break the surface tension of water.

DIRECTIONS:

SHAKE WELL BEFORE USE

For best results use in conjunction with Biophos Repro.

The nutrient guide aims to provide a general recommendation of when to use each product and in which periods of the growth phase you should increase the dosages. Can also be used for Hydro applications.

Foliar application: 5 ml per litre water. Apply early morning or late afternoon. Do not spray on plants that are wilted.

Week 1-3 (Seedling Phase): 1 – 5ml per litre

Week 1-3 (Vegetative Phase): 5 – 10ml per litre

Please Note: This guide is not intended as a comprehensive growing guide but a guideline designed to ensure proper utilization of these nutrients.
For best results refer to EC pen, adjust PH (5.8 – 6.2) and EC (1.5 – 1.8). Every plant is different therefore growing is about experimenting.

COMPOSITION:

Nitrogen (N) 25.8 g/kg
Phosphorous (P) 2.2 g/kg
Potassium (K) 6.2 g/kg
Magnesium (Mg) 0.1 g/kg
Zinc (Zn) 135 mg/kg
Iron (Fe) 115 mg/kg
Manganese (Mn) 53 mg/kg
Copper (Cu) 61 mg/kg
Boron (B) 251 mg/kg
Molybdenum (Mo) 160 mg/kg
Cobalt (Co) 31 mg/kg
Nickel (Ni) 33 mg/kg
Kelp 12%
PhytoFulvic Acid 20%

Product Properties:
S.G: 1.22 ± 0.02
pH: 4.4± 0.1
Appearance: Dark Brown thick liquid

Storage Instructions:
Storage temperature: 13ºC – 25ºC.
Store in a cool dry area
Do not store in direct sunlight.

 

Growbiz Solutions – formerly known as Cannabiz Solutions

 

Green House Powder Feeding – BioGrow

Green House Powder Feeding – BioGrow

Green House Powder Feeding – BioGrow is an all-in-one bio fertilizer in powder form, formulated specifically for the vegetative growth of all plants. All essential nutrients are provided by the natural-minerals and organic raw materials.

Green House Powder Feeding – BioGrow is suitable for biological agriculture. Natural mineral nutrients are immediately available for the plant and the organic nutrients are released slowly after being decomposed by microorganisms in the soil.

The beneficial fungus and bacteria in BioGrow improve the microbial activity of the soil by supplying components that form humus. This process depends on the conditions of the soil (e.g. humidity,temperature, pH-value, microbial activity, organic matter content, etc.)

How to use: 
BioGrow needs to be mixed into the substrate. It can be used in soil, coco or similar substrates.
It can be mixed at the time of transplantation or added later as top dressing (mixed into the top layer of the soil)

The nutrients will be released constantly during a period of 8 weeks.

If the growth period is less than 8 weeks or the substrate is pre-fertilized, doses should be decreased. Use half dosage for seedlings and young plants (2-3 weeks old). If the growth period is longer, a second application is required (as top dressing).

Dosage:

Vegetative growth: 3g per Liter substrate

Mother plants: 2-3g per Liter substrate every two months (as top dressing)

 

Warning:

Mycelium from beneficial fungus can appear on top of the substrate.

It improves microbial life inside the substrate and will not harm humans, animals or plants.

Fungi is the main agent of the decomposition of organic matter such as simple sugars, amino acids, etc.

It solubilizes minerals that are not initially available to plants.

DO NOT REMOVE THIS FUNGUS! IT WILL DISAPPEAR AFTER SEVERAL DAYS

Pot SCROG Scrog Frames

Pot SCROG Scrog Frames 1

Pot SCROG Scrog Frames – One pot, one scrog frame! These per-pot plant support trellis frames enable you to train and support your plants while still being able to move them in and out of your grow tent or grow area whenever you want to.

Pot SCROG Scrog Frames are available from Hydroponic.co.za in 2 sizes:

Large, for 15lt pots or larger:
Top square frame is approx. 55 x 55 cm
Distance between top and bottom square is approx. 60 cm
The large frame is made so that 4 frames can be put into a 1.2 x 1.2 m grow tent.

Medium, for 5lt pots or larger:
Top square frame is approx. 43 x 43 cm
Distance between top and bottom square is approx. 54 cm
The large frame is made so that 4 frames can be put into a 1 x 1 m grow tent.

Growers who like to train and scrog (“Screen of Green”) their plants often get frustrated when their plants become unmovable, being tied to netting that is attached to a growing table or to grow tent frames, as this often makes trimming, defoliating, foliar spraying, flushing, pest identification and pest control hard if not impossible to do with ease.

With Pot SCROG Scrog Frames, each plant can be beautifully trained and levelled and still be easily moved outside for a good flush or onto a table for an easy trim or foliar treatment.

These frames ship in flat-packs, saving shipping fees and are quickly and easily assembled on site, as each frame’s scrogging grid is already woven into the frame

 

 

Hydor Wall or Inline Exhaust Fans

Hydor Wall or Inline Exhaust Fans

Hydor Wall or Inline Exhaust Fans – a QUALITY brand for residential, commercial  and industrial exhaust or supply air application. Directly connects to standard diameter circular ducting.

The handy EF fan range is ideal for smaller growing spaces and the square face plate can be removed from the fan, leaving only the cylindrical fan body for installation into flexible ducting, or a grow tent’s ducting sleeve (Using ether a ducting clamp, or even cable ties). The 2 shuttering flaps on the rear end of the fan can also be removed, to further trim down the unit for installation in side of ducting.

Features:

  • Sustainable for mounting in kitchens, bedrooms, toilets, etc.
  • Streamline design.
  • Easy installation and cleaning.
  • Low noise.
  • Maintenance free.
  • Does NOT come equipped with a plug. The unit only has a short length of 2-core electrical wire connected to the fan motor.
  • Hydor warranty: Products of its manufacture when not misused or neglected to be free of defects in workmanship and/or materials. Our obligation under this warranty is limited to repairing or exchanging F.O.B. factory, any part, assembly or portion found to be defective within one (1) year from the date of commissioning but not to exceed eighteen (18) months from date of shipment from our factory.

 

EF-1009 Inline Fan = 90 m3/h – can be connected to 100mm ducting
EF-1530 Inline Fan = 300 m3/h – can be connected to 150mm ducting

 

Hydor Wall or Inline Exhaust Fans Specifications:

Hydor Wall or Inline Exhaust Fans - dimensions 1

Technical Data wall fan

Performance:

Hydor Wall or Inline Exhaust Fans - flowrate graphs

 Wiring

wall fan wiring

 

How to work out the size and type of fan required:
In order to provide adequate ventilation for a given application, it is essential the
correct size, type and number of units are selected. Selection of the correct fan depends on two
principal factors: the performance and application.
Step 1
step1
Determine which mounting arrangements meet your requirements
Step 2
step2
Calculate the VOLUME of the room in cubic metres (m3) by multiplying the lenght x width x height.
Step 3
How many air changes (AC/H) are required.Work out how fast one complete ‘air change’ needs to be carried out under warm conditions (i.e the maximum you will ever need the fan to operate).If excess heat in a certain growing environment is a common problem, or there is a large volume of plants growing in a very restricted space you will need more air flow per hour than for a larger growing area which doesn’t suffer from too much heat build up with smaller plants.Growers commonly underestimate just how much ‘air exchange’ is required to remove excess heat and humidity, bring in fresh CO2 and generally create fresh air movement over all of the plant surfaces. As a comparison to greenhouse crops growing in full sunlight – one air change per minute or 60 air changes an hour are often aimed for with large, mature crops growing under warm, humid conditions. However, in a grow room situation, one complete air change obtained in 4-5 minutes is acceptable. Obviously this needs to be more frequent (one complete air change in 2-3 minutes) where lighting is creating a lot of extra heat to be removed or when a CO2 generator is being used.
Step 4
Use the following formula: Volume (m3) x AC/H = Airflow (m3/h)

Step 5
Select a fan that does the airflow you require.

FC-E4800 Mars Hydro Combo

FC-E4800 Mars Hydro Combo

The FC-E4800 Mars Hydro Combo celebrates the combination of the Mars FCE-4800 and the Mars-Hydro 1.2 x 1.2 x 2 m grow tent.

The Mars FCE-4800 LED grow light has many advantages over traditional HPS and older LED grow lights.

  • Samsung diode level efficiency without the Samsung price tag. Superior efficiency at 2.7 μmol/j.
  • 50% more effective than HPS for the same PPFD output.
  • A more natural spectrum that is better suited to plant growth.
  • Even light distribution. Unmatched by other grow lights.
  • IP65 grade waterproofing, ensuring a longer lifespan with a sustained high output.
  • The rectangular design allows for easy scaling.
  • No active cooling, resulting in zero noise.
  • Easy dimming for reduced electricity consumption in early growth stages.
  • Removable driver and light bars for easy storage and handling.
  • Foldable for easy storage and handling.

Description

LEDs use less power (watts) per unit of light generated (lumens) and produce less heat than other lights. LEDs help reduce greenhouse gas emissions from power plants and lower electric bills. LEDs have an average lifespan of 50 000 hours compared to CFLs average lifespan of 8 000 hours.

Extreme LED power at unbeatable value.

Experience impressive results with your harvests. An impressive option for those seeking to get maximum coverage & output per watt, these unit’s performance will exceed your expectations!

The Mars FCE-4800 LED Grow Light Features:

LED Diode Brand: Bridgelux
Power Consumption: 240 V: 480 W ± 5%
Operating Requirements: Input voltage: 100 V – 277 V
Coverage Area: Flowering: 120 cm x 120 cm | Veg: 150 cm x 150 cm
Hanging Distance at 100% Strength: Seedling: 60 cm – 76 cm | Veg: 40 cm – 60 cm | Flower: 30 cm – 40 cm
Dimming at 30 cm Height: Seedling: 30% – 50% | Veg: 50% – 75% | Flower: 100%
Max yield: 2.5 g/watt
Included Hanging Accessories: Clasps and Ratchet Hangers
Product Dimensions: 83 cm x 82 cm x 10.5 cm
Product Weight: 9.1 kg
Operating Temperature: -20°C – 46°C
BTU: 1 288
Decibel Value: 0
Plug Type: SA
Warranty: 5 years
Peak PPFD Value at 45 cm: 1 011μMol/m2/s
Efficiency: 2.7 μMol/J
Compare to HPS/MH/HID: 600 watt
Spectrum: 380 – 410 nm (UV), 660 – 665 nm, 730 – 750 nm (IR), 2 800 – 3 000 K, 4 800 – 5 000 K

Mars FCE-4800 PPFD Chart

 

Reliable build quality: 5 year warranty

We manufacture our own Grow Lights. Every element that goes into our products must pass a stringent performance and durability test. The Mars FCE Series features quality points such as:  Aircraft grade aluminum heat-sinks, steel casing, premium copper internal wiring and power cord. Following strict development guidelines and quality engineering is how we can offer such an extensive warranty on every grow light we carry. Buy with confidence, buy Mars Hydro.

FC-E3000 Mars Hydro Combo

FC-E3000 Mars Hydro Combo

The FC-E3000 Mars Hydro Combo celebrates the combination of the Mars FCE-3000 and the Mars-Hydro 1 x 1 x 1.8 m grow tent.

The Mars FCE-3000 LED grow light has many advantages over traditional HPS and older LED grow lights.

  • Samsung diode level efficiency without the Samsung price tag. Superior efficiency at 2.7 μmol/j.
  • 50% more effective than HPS for the same PPFD output.
  • A more natural spectrum that is better suited to plant growth.
  • Even light distribution. Unmatched by other grow lights.
  • IP65 grade waterproofing, ensuring a longer lifespan with a sustained high output.
  • The rectangular design allows for easy scaling.
  • No active cooling, resulting in zero noise.
  • Easy dimming for reduced electricity consumption in early growth stages.
  • Removable driver and light bars for easy storage and handling.

Description

LEDs use less power (watts) per unit of light generated (lumens) and produce less heat than other lights. LEDs help reduce greenhouse gas emissions from power plants and lower electric bills. LEDs have an average lifespan of 50 000 hours compared to CFLs average lifespan of 8 000 hours.

Extreme LED power at unbeatable value.

Experience impressive results with your harvests. An impressive option for those seeking to get maximum coverage & output per watt, these unit’s performance will exceed your expectations!

The Mars FCE-3000 LED Grow Light Features:

LED Diode Brand: Bridgelux
Power Consumption: 240 V: 300 W ± 5%
Operating Requirements: Input voltage: 100 V – 277 V
Coverage Area: Flowering: 90 cm x 90 cm | Veg: 120 cm x 120 cm
Hanging Distance at 100% Strength: Seedling: 60 cm – 76 cm | Veg: 40 cm – 60 cm | Flower: 30 cm – 40 cm
Dimming at 30 cm Height: Seedling: 30% – 50% | Veg: 50% – 75% | Flower: 100%
Max yield: 2.5 g/watt
Included Hanging Accessories: Clasps and Ratchet Hangers
Product Dimensions: 60.2 cm x 60.4 cm x 7.9 cm
Product Weight: 9.1 kg
Operating Temperature: -20°C – 46°C
BTU: 798
Decibel Value: 0
Plug Type: SA
Warranty: 5 years
Peak PPFD Value at 45 cm: 1 170 μMol/m2/s
Efficiency: 2.7 μMol/J
Compare to HPS/MH/HID: 400 watt
Spectrum: 380 – 410 nm (UV), 660 – 665 nm, 730 – 750 nm (IR), 2 800 – 3 000 K, 4 800 – 5 000 K

Mars FCE-3000 PPFD Chart

mars- hydro FC-E3000 led grow light PPFD Map

 

Reliable build quality: 5 year warranty

We manufacture our own Grow Lights. Every element that goes into our products must pass a stringent performance and durability test. The Mars FCE Series features quality points such as:  Aircraft grade aluminum heat-sinks, steel casing, premium copper internal wiring and power cord. Following strict development guidelines and quality engineering is how we can offer such an extensive warranty on every grow light we carry. Buy with confidence, buy Mars Hydro.

YoYo Plant Trainer

YoYo Plant Trainer

The YoYo Plant Trainer are superb for separating and spreading out your plant stems. Attach the yoyo to your tent-frame or grow-room wall and then pull out the angled hook and clip it around the plant-stem. The gentle tension in the yoyo will then pull the plant-stem out. Great for getting plants to open out for increased yields!

  • YoYo Plant Trainer – one of our most popular plant-training / support devices
  • Contains a 1.2m long nylon line with an angled hook for clipping around a stem
  • Light spring tension in the yo-yo gently pulls the stem toward the reel
  • Alternatively, you can insert the included plastic stopper to keep the line at a static length.
  • Attach yo-yo to your tent-fame or grow-room wall and gently open your plant out to receive more of the available light
  • Helps you to make the most of your grow-space and light
  • Re-useable many times

The YoYo Plant Trainer Contains:

1 x YoYo Plant Trainer

How the YoYo Plant Trainer Works:

The yo-yo plant trainer consists of a 1.2 metre long nylon line (similar to fishing line) which is wound onto a lightly sprung reel inside the yo-yo’s housing. An angled hook is attached to the end of the nylon line for clipping around a plant-stem and there is hanging hook on the yo-yo reel housing for attaching to a grow-tent frame or your grow-room wall (via a cup-hook or similar). The tension is fairly consistent over the 1.2 metres of the travel but inevitably there is slightly more tension on the line at full extension than there is when only a few centimetres has been pulled out.

Using the Yo-Yo Plant Trainer

Yo-Yo plant trainers are mainly for use on mature plants as they reach the end of the vegetative phase and also especially during flowering/fruiting. Plant-stems on young plants are usually too thin and delicate for this type of training. During the flowering/fruiting time, plants tend to grow upwards but not outwards, leading to the stems getting bunched together. By opening out the plant, each stem will get more light lower down, encouraging more flower or fruiting sites.

Attach the yo-yo body to the outside of your grow-space (i.e to your grow-tent or grow-room wall) via the clip. Pull the hook out and clip it around the plant-stem. The plant-stem will now be gently pulled towards the yo-yo body, opening the plant out. Use as many yo-yo’s as necessary, pulling in different directions, to open out your plant to receive more light and increase the number of flowering or fruiting sites which will eventually increase yields.

If you are lucky enough to have stems bowing under the weight of your crop at the end of the flowering or fruiting stage then yo-yo’s can be attached to the ceiling / tent-roof frame, to provide upwards support to the plant-stems. This will help prevent stems from bowing downwards away from the light and also from breaking under the weight of the produce!