Search Results for: 100% CCBA Exam Coverage 🏌 Exam Dumps CCBA Zip 🧜 CCBA Real Exam 🔃 Search for [ CCBA ] and easily obtain a free download on ⏩ www.pdfvce.com ⏪ 💐Valid CCBA Test Questions

Formula 1 Cal-Mag Part B

Formula 1 Cal-Mag Part B

Formula 1 Cal-Mag Part B by Freedom Farms – Part B of a tailor-made, 2-part water soluble mineral plant feeding range designed with Freedom Farms’ Formula 1 growing medium in mind, but can of course also be used with other substrates.

Combine with Formula 1 Essentials (Part A) for full spectrum plant nutrition!

Volume: 1lt

Dosage: 1ml/liter

NPK Ratio: 12 – 0 – 0 + 10Ca + 3Mg

NUTRIENT CONTENT:

NITROGEN 47.40 g/kg

CALCIUM 5.48 g/kg

MAGNESIUM 4.15 g/kg

 

DIRECTIONS FOR USE:

ALWAYS SHAKE WELL BEFORE USE. FILL A CLEAN VESSEL WITH FRESH WATER OF KNOWN AMOUNT. ALWAYS SHAKE THE NUTRIENT CONCENTRATE WELL BEFORE USE. ADD 2 PARTS (2ML/L) OF FORMULA 1 ESSENTIALS AND MIX THE SOLUTION. ADD 1 PART (1ML/L) OF FORMULA 1 CAL-MAG AND MIX THE SOLUTION THOROUGHLY. AN EC OF AROUND 1.2 MS/CM SHOULD BE MEASURED. DRENCH THE GROW MEDIUM THOROUGHLY WHEN APPLYING THE NUTRIENT SOLUTION. FREQUENCY OF APPLICATIONS TO THE FORMULA 1 CRAFT SOIL CAN VARY BETWEEN A SINGLE 1.2 (EC) APPLICATION ONCE PER WEEK TO A SINGLE 1.2 (EC) APPLICATION EVERY TWO WEEKS DEPENDING ON GENETICS AND ENVIRONMENT. PLAY AROUND. NEVER OVERFEED. RATHER UNDER FEED AND ADJUST ACCORDINGLY.

ADDITIONAL SOLUBLE AMENDMENTS CAN BE ADDED SUBSEQUENTLY TO THE FORMULA 1 A+B NUTRIENT SOLUTION FOR DIFFERENT STAGES OF PLANT DEVELOPMENT.

 

 

Black Nitrile Gloves

Black Nitrile Gloves

Black Nitrile Gloves

Black Nitrile gloves are made out of a synthetic rubber, and are an ideal alternative when latex allergies are of concern.   This type is the superior glove when it comes to puncture resistance and is often referred to as “medical grade.”

Attributes include:

  • Latex-free
  • Are most puncture resistant
  • Have a high level of sensitivity
  • Mold to your hand for a great fit
  • Are good for wearing an extended amount of time
  • Work well for high-risk situations involving infectious material
  • Resist many chemicals
  • Have a long shelf life

Sizes: Various

Powder Free

Noids Pot Herb Cooker

Noids Pot Herb Cooker

Noids Pot Herb Cooker – Decarboxylation, oil/butter infusion, ethanol extraction, and filtering? POT by NOIDS is the only machine on the market that does all the above.

Created for cooking medicinal herb, POT by NOIDS is designed to make herb-cooking at home free of hassle, stink, and mess. The unique Smart Heating Algorithm collapses all the complexity of knowledge and handling into a simple twist of the machine. The only thing you need to know is what you want, POT will take care of the rest. POT by NOIDS – 1 machine, 5 functions, any strain.

 

 

(NOIDS POT Youtube channel: HERE)

 

No burn: The Smart Heating Algorithm minimizes the heat fluctuation to within 1°C (no oven can do this). This means that the bio-active compounds in your herb will be fully activated without any burn.

No mess: The PBN filter has system 2 layers of fine meshes made of medical-grade stainless steel, you can filter oil directly into a small bottle with clean fingers, and, after cooking, you can simply wash the removable beaker and the filter system in your dishwasher.

No hassle: There are different settings for decarboxylation and infusion. The cooking time and cooking temperatures are calculated and adjusted automatically for each batch (different weights, moisture levels, volumes) based on the feedback from the sensors. You just need to know what you want, POT knows how to get it done for you.

No waste: POT by NOIDS comes with a pipet that can recover every last drop of your good oil from the cooked herbs. Every drop matters.

No plastic: POT by NOIDS is made of metal, high thermal shock resistance glass, food-grade silicone, and medical-grade stainless steel. The original packaging is made of moisture-proof recycled paper, also plastic-free!

3-year warranty.

In the package:

POT by NOIDS main body
Glass beaker
Filter system (funnel + mesh)
Flat lid
Pipette
Condenser

 

Thread Seal Tape 19mm

Thread Seal Tape 19mm

Thread Seal Tape 19mm: The Ultimate Solution for Leak-Proof Connections

Perfect Seal Every Time, your go-to solution for ensuring leak-proof and secure connections in all your plumbing, gas, and air systems. Whether you’re a professional tradesperson or a DIY enthusiast, this high-quality tape is essential for achieving reliable seals.

Key Features and Benefits

  • Reliable Leak Prevention: Designed to provide a perfect seal on threaded pipe joints, this tape (also known as plumber’s tape) prevents leaks in plumbing, gas lines, and air systems, ensuring your installations remain secure and drip-free.
  • High Durability: Made from premium-grade PTFE (Polytetrafluoroethylene), this tape offers excellent durability and resistance to wear, ensuring long-lasting performance in various applications.
  • Easy to Apply: The tape’s 19mm width is ideal for a wide range of pipe sizes, making it easy to apply and ensuring a snug fit every time. Simply wrap the tape around the threaded area of the pipe for a quick and effective seal.
  • Versatile Use: Suitable for both residential and commercial applications, the tape is perfect for sealing connections in water, gas, and air systems. It is compatible with most types of pipes and fittings, making it a versatile addition to your toolkit.
  • Non-Toxic and Safe: The tape is non-toxic and safe to use in all environments, including those involving drinking water. It complies with all relevant safety standards, giving you peace of mind.

Specifications

  • Width: 19mm
  • Thickness: 0.1mm
  • Length of roll: 12m
  • Material: PTFE (Polytetrafluoroethylene)
  • Color: White

The Thread Seal Tape 19mm stands out for its ease of use, durability, and effectiveness. It is an essential product for anyone looking to ensure secure and leak-proof connections in plumbing, gas, and air systems. Its high-quality PTFE construction guarantees reliable performance, while its compatibility with a wide range of pipes and fittings makes it incredibly versatile.

Application Tips

  1. Clean the Threads: Ensure that the threads are clean and free from debris before applying the tape.
  2. Wrap Correctly: Wrap the tape around the threads in the direction of the thread rotation to ensure a tight seal.
  3. Apply Evenly: Overlap the tape slightly as you wrap to cover the threads completely without bunching.

Ensure your connections are secure and leak-proof with the Thread Seal Tape 19mm. Order today and experience the peace of mind that comes with knowing your systems are reliably sealed.

CO2 Regulator

CO2 Regulator

A CO2 Regulator helps with CO2 supplementation for your grow area and your plants will love you for it!  CO2 supplementation using CO2 tanks and regulators become necessary when the grow area is too large to be accommodated by other means of CO2 supplementation that are best suited for smaller growing areas, like the average grow tent ( e.g. Yeast and sugar solutions / mycelium generators / compressed CO2 can dispensers, etc. )

There is great benefit to supplementing with CO2 when growing – as plants use the carbon gleaned from CO2 in the air to literally build themselves! ( Read more HERE )

  • Please Note: Our regulators may vary slightly in appearance and specification, depending on availability.
  • IMPORTANT: These types of regulators are NOT made to release gas for extended periods of time ( short bursts of up to around 30 seconds only, with enough time between bursts to allow the regulator to get back to normal temperature ). For LARGE rooms a thermostatically controlled electric heated regulator will be required! An unheated unit will freeze up and cease to operate correctly or trip power supply when it releases gas for extended periods of time / too frequently! If a regulator freezes up – it is either overworked, or faulty. Both of these conditions require urgent attention.
  • HANDY TIP: Apply Soapy water to (pressurized) parts and connections of your system to make sure that there are no leaks present. 

 

These CO2 Regulators are fitted with a 220-volt solenoid which can be turned on and off manually, or using a digital timer. Both of these methods are NOT RECOMMENDED – increasing CO2 levels in the air without CO2 monitors or CO2 controllers CAN BE FATAL! Using a CO2 controller with the regulator is ideal, as the controller’s CO2 sensor will turn the CO2 supply from the tank OFF when the desired ( and still safe for humans ) PPM levels are reached. Growers often like add enrich their room air to concentration of up to 1200 PPM CO2.

CO2 tanks are normally rented or refilled with commercial gas suppliers, e.g. Afrox.

Our regulators have the following minimum specifications:

  • 1.6m length of electrical cord and standard ZA Plug.
  • Max Inlet Pressure: 0-315 bar
  • Electricity Supply: 220V, solenoid 220V
  • Flow Rate: Up to 7 l/min
  • Pressure Gauge: Up to 3500 psi

Fertilis Worm Castings

Fertilis Worm Castings

Fertilis Worm Castings:

“Made from cow manure, processed by earthworms. Odourless, weed-free, guaranteed not to burn”

input_organic_eu

(Approved input for Certified Organic by Control Union for EU & US NOP standard)

Fertilis Earthworm Castings is a complete plant food and rich humus made from dairy cow manure that is processed by earthworms (Eisenia foetida). It is Certified Organic and environmentally friendly. It is odourless, weed free and guaranteed not to burn, as it is pH balanced and contains billions of beneficial micro-organisms that give the soil its life and fertility. Fertilis is true ‘food-state’ nutrition for the Earth.

N 2%, P2%, and K 1%.

  • Can be applied to all soils
  • Soil Conditioner and top dressing for lawns, indoor and outdoor plants
  • For planting out seedlings, bulbs, etc
  • For making top quality potting soil and germination mix
  • Seasonal application on shrubs, flowers, roses, and trees

Fertilis Worm Castings Product Benefits

  • Contains no harmful ingredients to man or the environment
  • Helps to restore natural balance and structure to soils
  • It is naturally Ph balanced
  • Combats pollution and helps lock CO2 into soil
  • Results in healthier, better developed plants with higher yields
  • Slow release – apply only once every season
  • Reduces costs to gardener / farmer by almost 20% overall
  • Produces healthier, tastier edibles with longer shelf life
  • Facilitates re-activation of dormant earthworms in any soil
  • Improves water retention and aeration of soil
  • Reduces need for toxic pesticides

 

 

Rainbow Neoprene Discs 48mm

Rainbow Neoprene Discs 48mm

Rainbow Neoprene Discs 48mm – random colours, ideal for cloning and use in NFT hydroponic systems.

These foam disks measure 48mm x 13mm and fit inside 50ml and 75ml Net Pots.

 

Also in our store!

 

Neoprene Discs (Neoprene Collars, Neoprene Inserts, Clone Collars) fit inside net pots and are used to support plants growing in Hydroponic or Aeroponic Systems.

Some growers prefer neoprene discs over plastic lids because they can place the stem of a new cutting into the slit of the insert so that the cutting doesn’t slide down or move. 

Rainbow Neoprene Discs 48mm are used to support your cuttings for true medium free growing. They fit perfectly in the top of the  Net Pots and firmly keep your cuttings upright and stable while their aeroponic roots begin to form. The pots are suspended below the top tray and a fine mist of water and nutrient is constantly sprayed around the base of the plants. This misting stimulates fast growth as the roots are encouraged to grow out to access the water and nutrient. The plants have superb access to oxygen and plants are typically ready to transplant after just 7 to 10 days  They can easily be removed from your cuttings once the time comes to transplant them into your main growing system.

A tough synthetic foam that is resistant to the effects of aging, heat, and weather.

MistMaker 12 Float

MistMaker 12 Float

A MistMaker 12 Float allows a Mistmaker 12‘s mist head to float freely around a water filled container at the idea depth below the water’s surface. As the water is atomized by the ultrasonic ceramic disks housed inside the mist head, the water level in the container will recede over time. This can happen quite quickly, with the capacity of the MistMaker 12 Ultrasonic Humidifier being 6.5lt /per hour.

The float allows the mist head to recede as the water recedes, always being at the right level beneath the water’s surface. This is obviously a vast improvement over having a static mist head, where a lower water level can quickly cause the MistMaker to cut out. (A built-in safety feature of these units).

The Mistmaker 12 mist head’s dimensions are: 150mm diameter, 55mm height (incl. water level sensor) and this float is made to accommodate it at the optimal level beneath the water.

The diameter of the float is 28cm and its full height is 7.5cm.

********************

The MistMaker 12 Ultrasonic Humidifier is a great tool to use to increase humidity in an enclosed space. The MistMaker can also be used for foliar feeding or aeroponic root feeding, as plant leaves and roots are able to absorb the minute water particles very easily.

* Lighter for scale

MistMaker 5 Float

MistMaker 5 Float

A MistMaker 5 Float allows a Mistmaker 5‘s mist head to float freely around a water filled container at the idea depth below the water’s surface. As the water is atomized by the ultrasonic ceramic disks housed inside the mist head, the water level in the container will recede over time. This can happen quite quickly, with the capacity of the MistMaker 5 Ultrasonic Humidifier being 1.6lt /per hour.

The float allows the mist head to recede as the water recedes, always being at the right level beneath the water’s surface. This is obviously a vast improvement over having a static mist head, where a lower water level can quickly cause the MistMaker to cut out. (A built-in safety feature of these units).

The Mistmaker 5 mist head’s dimensions are: 85mm diameter, 55mm height (incl. water level sensor) and this float is made to accommodate it at the optimal level beneath the water.

The diameter of the float is 20cm and its full height is 7.5cm.

********************

The MistMaker 5 Ultrasonic Humidifier is a great tool to use to increase humidity in an enclosed space. The MistMaker can also be used for foliar feeding or aeroponic root feeding, as plant leaves and roots are able to absorb the minute water particles very easily.

* Lighter for scale

Bioleaf MCG Specialized Growing Medium 60L

Bioleaf MCG Specialized Growing Medium 60L

Bioleaf MCG Specialized Growing Medium 60L is specifically designed for the cultivation of medicinal grade Cannabis. A top quality professional soilless medium, Bioleaf has a balanced pH and optimal water holding capacity and air porosity. Bioleaf uses the best quality horticultural Perlite and Coco Peat and coir E.C. is carefully monitored.

Bio Leaf Technologies growing mediums are manufactured to strict quality standards in their ISO 9001 certified production facility. Their products meet the requirements for growing products for food and medical grade and meet the requirements for OHSAS 18001 certification.

Bioleaf MCG Specialized Growing Medium 60Ldoes not contain soil and is free from pathogens and other organisms. Every batch is laboratory tested to ensure consistent quality, to give you peace of mind as a grower, and help you harvest a consistently superior quality product, fit for medical applications.

Bag Volume: 60 lt

 

T8 LED Tubes and Fittings 60cm

T8 LED Tubes and Fittings 60cm

T8 LED Tubes and Fittings 60cm:

REMEMBER TO BUY 2 LED TUBES FOR EACH FITTING : )

T8 Fixture Connector Advice

Low cost, slim-line and ultra light, these can easily be installed over propagators or inside a propagation tent. They can also be hung vertically to be used as supplemental lighting for dark tent corners and in between plantings.

Each Double T8 LED Fitting is 615mm long and fits 2 x T8 LED tubes. PLEASE NOTE: These fittings are not the same as older fluorescent fittings (which have ballasts and starters) and should not be used for fluorescent tubes!

Each Clear T8 LED Tube is 600mm long, has a 9 Watt power draw, 6500K colour temperature, and Lumen output of 810 Lumens. PLEASE NOTE: These tubes are not the same as older fluorescent tubes and should not be used in fluorescent fittings!

For best results 4 to 6 T8 tubes are recommended above a single large sized propagator, like the Garland XL High Dome Propagator.

The LED tubes produce hardly any heat and can be hung as close to the cuttings or seedlings as possible to maximize the light intensity.

T8 LED Tubes and Fittings 60cm Assembly:

  • Always wire up and use correctly.
  • Never put strain on the connected electrical wire. Do not hang from electrical wire.
  • PLEASE NOTE: The holes of the hanging eyelets ( that are folded up, out of the casing, if needed, one on each side ) are too small to clip into standard rope ratchet clips. Use something like a round key-holder ring to go into the hanging eyelets and then clip the key ring into the rope ratchet clips if needed.
  • Take care when handling these units as they are light-duty items and can easily damage if dropped by accident.
  • For indoor use only

T8 Instructions

1Pot Extension Unit AQUAValve5

Autopot 1 Pot Extention Unit with AQUAVALVE 5

An Autopot 1Pot Extension Unit AQUAValve5 is used when you already have an Autopot system and would like to add another unit to it, or when installing a new customized system.

AQUAValve5 for systems using 9mm and 12-9mm fittings.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The needs of growers are ever-evolving, served by an increasingly diverse range of nutrients. With a bigger, 5mm inlet, the new Aquavalve 5 rises to the challenge of delivering the widest range of nutrients in a faster flow for a quicker fill, maximizing system efficiency. Maintenance is reduced and the risk of blockages is minimized.

The Autopot 1Pot Extension Unit AQUAValve5 is extremely versatile and can be used for a wide range of plant varieties and sizes. The unit is easily extended so many pots can be linked to a single tank.

The 15 liter pot that is supplied with the 1 Pot module enables you to grow large specimen plants.

The pot and the tray can be easily  moved if the  plant grow too large  and need to be  spaced further apart.

The 15 liter pots used in the 1 Pot module  and
the 8.5 liter pots pots used in the 2 Pot Unit system are interchangeable and can be used  in either tray design.

Ensure all trays are level when in position.

The Autopot 1Pot Extension Unit AQUAValve5 includes:

  • 1x Tray, with lid and grommet
  • 1x 15ltr Pot
  • 1x AQUAvalve 5
  • 1x 1 meter of 9mm Pipe
  • 1x Marix Disc (SQUARE) 186mm x 186mm (BLACK)
  • 1x Root Control Disc (SQUARE) 196mm x 196mm (BLACK & GOLD)
  • 1x 9mm Tee for easy connection to existing systems.
  • 1x 12-9mm T Connector
  • 1x 12-9mm Cross Connector

Reservoir and growing medium not included

1 Pot Kit Instructions

AutoPot Brochure

Bud Juice TNT

Bud Juice TNT

Bud Juice TNT (Total Nutrient Transfusion) – explode your grow and nourish your substrate with TNT. Contains macro and micro nutrients, humic and fulvic acids, sugars, and carbon.

Used from seedling through flowering stages.

Bud Juice TNT directions:

  • Shake well before use. Use within 24 hours of mixing
  • Seedlings: 0.5 ml/lt once per week
  • Vegetative Stage: 2 – 3 ml/lt once per week
  • Flowering Stage: 3 – 1 ml/lt once per week (decrease concentration as harvest nears)

More on Aminos…

Amino acids play a pivotal role in the growth and development of plants. Due to their fundamental importance, plants have evolved efficient mechanisms for digesting amino acids. In fact, plants possess various enzymes and transport systems specialized for the uptake and utilization of amino acids from the surrounding soil solution. This efficient digestion ensures that plants can readily access the essential building blocks required for synthesizing proteins, enzymes, and other vital molecules necessary for their growth. For plant growers, utilizing the digestibility of amino acids by plant is beneficial, as it easily improves the overall health and vigor of their plants.

Amino acids facilitate rapid growth and development, allowing plants to reach their full potential in terms of size and yield. Additionally, amino acids contribute to enhanced stress tolerance, enabling plants to withstand environmental pressures such as heat, drought, or disease more effectively. Moreover, easily digested amino acids can improve overall nutrient uptake, ensuring that plants have access to essential nutrients necessary for optimal growth. Overall, incorporating amino acids into the nutrient regimen can lead to healthier, more robust plants with improved yields, ultimately satisfying the goals of growers aiming for top-quality harvests.

Blumat Support Stakes 10 Pack

Blumat Support Stakes 10 Pack

The Blumat Support Stakes 10 Pack will come in handy when securing your Blumat Tropf 8mm Tubing and Blumat Distribution Drippers around your grow space.

It is recommended to use the Blumat Support Stakes 10 Pack with the Distibution Drippers to prevent them form laying in the soil and getting clogged up. Checking on the drippers to ensure proper flow is also made easier with the Support Stakes.

The Blumat Tropf System Distribution Dripper Set increases the watered area allocated around a single Blumat Tropf “carrot” (orange clay cone with watering diaphragm on top) – extending your watering capacity without the need for extra Tropf sensors (carrots). We recommend adding up to 5 drippers to one Blumat Tropf “carrot”. You could place the drippers up to 1m from the carrot/sensor and each dripper will water an area with a diameter of around 20 cm. Distribution drippers are best installed by using a dripper support.

Whether a person can use a mineral nutrient solution for feeding in conjunction with the Blumat system is debatable – as the small diameter pipping and drippers may easily clog up over time with normal salt build-ups and nutrient calcification. A flushing and rinsing agent like FlashClean may have to be used periodically to dissolve any nutrient build-up inside the piping and/or clay cone “carrots”.  An alternative would be to top-feed with your favorite nutrient range as needed and to rely on the Blumat system for regular watering in between feedings. Be especially careful when trying to add nutrients to your system when using the distribution drippers, as they can clog up easily.

Blumat 8mm Shut-Off Valve

Blumat 8mm Shut-Off Valve

The Blumat 8mm Shut-Off Valve connects to the Blumat Tropf 8mm Tubing and is used to turn off the water supply from the water tank to the Blumat Tropf Sensors / “carrots”. This will enable you to easily adjust and maintain your Blumat Automatic Watering System when needed.

The valve can also be installed at the ends of supply lines to easily flush them out when needed.

The Blumat Tropf system works by using gravity and the capillary interaction between the soil and the orange Blumat clay “carrot” cones. When the soil or substrate is dry, it will create a suction inside the water filled cone tubes – opening the diaphragm at the top of the carrot and allowing water to drip from the tubing. Once the soil around the clay cone becomes moist, this suction will cease and close the diaphragm again.

This allows for each individual pot to be watered automatically only when needed, and a single Tropf system can have up to 500* watering points ! The “carrot” does the thinking for you !

Please note: The water tank must be at least 0.5 m higher than the Blumat Tropf system for every 5 m of tube but no more than 14 metres higher. ( * DETAILED INSTALLATION INSTRUCTIONS HERE )

Blumat 8mm Shut-Off Valve a is key part of your custom-built Blumat Tropf Automatic Watering System