The Autopot Easy2grow 12 System AQUAValve5 with 8.5L Pots without Tank can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.
The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.
The AutoPot Easy2grow (2 Pot) system is AutoPotâs best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.
A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.
The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plantâs needs.
Autopot Easy2grow 12 System AQUAValve5 with 8.5L Pots without Tank includes:
1 x 12mm Click-fit tank adaptor & filter
1 x 12mm In-line tap with 2 x 12mm in-line tap adaptor fittings
1 x 3 metres 12mm Pipe
6 x 2 Pot tray & lid ( Black )
12 x 8.5L Pots ( Black )
6 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 12 Marix Disks, 12 Square potsocks, 3 x 12mm â 9mm Cross connectors & 6 x 1 meters of 9mm Autopot piping)
Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.
It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice
Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.
The Essentials Digital Moisture Meter allows you to easily measure the level of moisture in drying herbs, indicating whether the dried product is ready for curingor storage. It is ideal for testing herbs that are drying, or plants such as tobacco or tea.
This moisture meteris easy to use and comes with a handy carry case, as well as a 9V “Block” battery.
Power on the unit and remove the protective probe pin cap – be careful when using the unit, as the probes are very sharp and cause injury to self, others, or pets.
Insert the pins into the substance that is being dried to see the moisture content – the pins should ideally be pushed 5mm into the tested substance.
The moisture reading will now be displayed on the screen – you can press the HOLD button to “freeze” the current reading, in case you need to write it down.
Turn unit off again after use and clean the pins carefully with a soft moist cloth if necessary. Remove the battery from the unit if it is not going be used for an extended period of time.
The meter has a reading range of between 5 and 40 % moisture content.
The Autopot 9Pot System AQUAValve5 with 15L Pots is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.
The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.
The system is easily extended so many pots can be linked to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.
The autopot automated system works via a gravity fed feeding system that is easy to install and maintain without wasting a single drop of water.
A wide range of growing substrates can be used with the Autopot system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the Autopot system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.
Autopot 9Pot System AQUAValve5 with 15L Pots includes:
1 x 100lt Flexitank
1 x 12mm Click-fit tank adaptor & filter
1 x 6 meter Length of 12mm pipe
2 x 12mm In-line tap
4 x 12mm In-line tap adaptor
1 x 12mm Tee Piece
2 x 12mm Elbow
9 x 1Pot trays & lids
9 x 15ltr Pots
9 x Autopot 1 Pot accessory packs with AQUAVALVE 5. (Incl. 9 Marix, 9 Root control disks & 9 x 1 Meters of 9mm Autopot piping, 3 Cross Connector 12mm to 9mm & 3 T Connector 12mm to 9mm )
Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.
It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice
Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.
Jiffy C Coir Pellets provide superior aeration and water retention.
âą These Jiffy Pellets are made from 100% Cocopeat substrate that is purified and stabilized, are peat free and provide a superior, aerated rooting media.
âą Wrapped within a biodegradable containment material, it is based on the proven theory of âcontainer and media in one.â
âą Stringent quality control guarantees that the physical and chemical properties of the coco substrate provide an optimum rooting environment.
Jiffy C pellets were designed to facilitate the propagation of plants and are the ultimate container and substrate in one. Made from RHP certified cocopeat encapsulated in a biodegradeable netting, Jiffy pellets provide world class substrate that is pre-prepared, easy to handle and has great rooting capability.
Jiffy C pellets are designed to be transplanted directly into the soil, allowing roots to easily grow through the biodegradeable netting wall and into the soil.
Simply soak the pellets, sow the seeds and once they germinate one can transfer the entire pellet.
Terra Aquatica FlashClean(formerly GHE FloraKleen) is a unique, high performance rinse and soil conditioner for all substrates and systems.
From rejuvenating houseplants to maximizing yields and potential in commercial hydroponics, Terra Aquatica FlashClean is one of the most powerful tools available to gardeners!
Eventually, every growing system will develop fertilizer residue as a natural part of the growing process. This accumulation results in salt build-up that can block drippers, cause unsightly accumulations on the top of soil or substrate, and will eventually cause your plants undue stress and even root damage. With the highly concentrated nutrients available today, and high EC levels running in many systems, nutrient lockout can also be an invisible limit on your grow; Terra Aquatica FlashClean solves all these problems and more:
Dissolves accumulated fertilizer salts
Corrects nutrient balance
Treats nutrient lock out
Nourishes microbial life and refreshes soil and coco coir
Maximizes final stage growth (especially with Ripen)
Specifically developed to dissolve mineral salts, FlashClean releases nutrient bonds between minerals and substrate and allows you to rinse excess residue. This release also helps plants make the most of remaining fertilizers, especially in the crucial week just before harvest.
Unlike other âflushesâ and finishing products on the market, FlashClean is not an acid, isnât enzyme based, and does not dump magnesium or other mineral additives into your system – this makes it uniquely flexible: with FlashClean you can give your system, and your plants, a clean slate at any time and at any stage of the growth process.
No matter what type of growing system youâre using
– indoors or outdoors, soilless or hydroponic, pots or garden beds, FlashClean is easy to use: just mix with pH adjusted water and apply.
In recirculating hydroponic systems:
To reset and refresh before changing nutrients (Inc. before Ripen):Â Add 1.5 to 3 ml / L of FlashClean to your existing nutrient solution and circulate for 24 hours before draining and replacing with fresh nutrient solution. Use the lower dosage for young or fragile plants, and the higher dosage for established plants / close to harvest.
After nutrient burn or lock-out:Â Drain old nutrient solution, add 1.5 to 3 ml / L of FlashClean to pH adjusted water (you donât need to use a full tank, just enough to circulate freely and run the system). Circulate for 24 hours before draining and adding new, fresh nutrient solution. Use the lower dosage for young or fragile plants, and the higher dosage for established plants.
As a final rinse (after Ripen): Drain old nutrient solution, add 1.5 to 3 ml / L of FlashClean to pH adjusted water (you donât need to use a full tank, just enough to circulate freely and run the system). Circulate for for the last two days before harvest to increase sugar levels in your crop instead of losing aroma and medicinal content with a long water flush..
In potting soil & soilless mixes including Coco Coir:
To reset and refresh before changing nutrients (including before Ripen), and after nutrient burn or lock-out: Every fifteen days (or when needed after lock out etc.): fill a watering can with fresh pH adjusted water and add 1.5 to 3 ml / L of FlashClean. Drench until there is runoff from the bottom of the pot. Resume your regular fertilizer schedule with the next watering. Use the lower dosage for young or fragile plants, and the higher dosage for established plants.
As a final rinse / after Ripen: Use 3 ml / L of FlashClean instead of nutrients during the last two days before harvest to increase the sugars level in your crop instead of losing aroma and medicinal content with a long water flush.
NB: FlashClean can be used at any stage of growth or flowering but do not use FlashClean more than once every two weeks.
Use FlashClean with all nutrients and substrates, but above all Ripen
FlashClean helps Ripen work to its full potential. By rinsing residues of nitrogen and other salts out of your substrate, Ripen can get to work more effectively mobilizing nitrates and improving taste in your final crop.
When youâre done, instead of a 10-day flush with water after Ripen, try with FlashClean – growers around the world have, because in commercial production, 8 days per harvest is a big bonus!
The RAM CO2 Monitor and Controller has a range of features allowing easy monitoring and control of CO2 concentrations the area that it is required in. You can easily set a desired CO2 range specifying a PPM limit either side of a desired target level.
NB! : This controller is equipped with U.K plugs (Both male and female are UK)! South African plug adaptors are NOT included with this unit, but will be needed to properly operate this controller.
BUY ME NOW !BUY ME NOW !
The CO2 controller has 2 operating modes: Plant mode OR human mode.
In plant mode, plug the 220V solenoidof a CO2 regulator into the controller’s power outlet – the controller will turn ON the CO2 regulator when the CO2 levels in your grow room drop below the set-point. The integrated day/night sensor will be active in this mode, ensuring that the controller will NOT emit CO2 during your plants’ “night time” – when your plants don’t make use of it. A 1-week CO2 data log allows you to spot trends over a week period, leading to greater insight and a higher amount of control over your grow.
In human mode, plug a 220V extraction fan into the controller’s power outlet – the controller will turn ON the fan when the CO2 levels in the area where the sensor is installed become higher than the set-point. The integrated day/night sensor will be inactive in this mode, ensuring that the controller will turn on the extraction fan whenever CO2 levels become too high in the area.
RAM CO2 Monitor and Controller – Key Features:
A choice of 2 modes of monitoring and controlling (Human / Plant)
Large LCD display screen
1 week visual log of CO2 levels
4.5 M cable to COâ sensor
Wall mountable
Uses:
Monitor COâ levels live with the LCD display of the COâ PPM
Increase COâ levels (in plant mode) by controlling a COâ source.
Decrease COâ levels (in human mode) by activating your extraction.
Keep COâ levels within your pre-set range.
Technical Specifications:
Input: 100 â 240V AC / 50 â 60 Hz
Max. Load: 5A at 240V / 10A at 120V
Target CO2 setting: Between 400 and 3000 PPM
Tolerance Setting(Acceptable variance from target): Between 50 and 990 PPM
Measuring Range: 0 – 5000 PPM
Resolution: 1 PPM (0 – 1000), 5 PPM (1000 – 2000), 10 PPM (>2000)
Accuracy:
CO2 below 3000 PPM: +- 50 PPM or +- 5% of reading, whichever is greater
CO2 above 3000 PPM: +- 7% of reading
Response Time: CO2: < 2 min for 63% step change, < 4.6 min for 90% step change
Piggyback socket max load: 5 Amp @ 220V AC
Garden HighPro Vertical Wall Propots: These strong and long lasting vertical fabric pot hangers have a waterproof canvas backing with metal mounting rings punched through them for easy installation. Please note that some moisture may however seep through the stitching in the canvas.
The breathable geotextile fabric that the front potting cavities are made out of promotes soil aeration and air-pruning and also allows the substrate to dry out, so that roots do not stay waterlogged.
Create a beautiful vertical plant wall quickly and easily or use them to grow a lot more plants where space is limited.
Dimensions of Canvas backings:
12Pot: 100cm (H) x 90cm (W)
8Pot: 100cm (H) x 60cm (W)
4Pot: 100cm (H) x 30cm (W)
We recommend using a light Coco Coir and Perlite substrate and to avoid heavy, dense potting soils when filling the pots for planting. Also water lightly (even if watering needs to happen more frequently) to avoid the strain that the additional weight of fully saturated substrate will place on the mountings of your vertical unit.
Watering your Garden HighPro Vertical Wall Propots can be made easier with automation: Button drippers that are connected to your current residential irrigation system can be installed to water each pot cavity. Choose a button dripped that will emit just the right amount of water for each pot during your regular watering schedule. Button drippers require a few Bars of water pressure to function correctly, so will not work with low pressure water pumps. If you are building an automated or semi-automated watering system for your vertical wall using a low pressure water pump, use arrow drippers instead.
The Can-Lite PL Range Carbon Filter Flange twists onto the lightweight Can-Lite PL Plastic Carbon Filter range (Filters sold separately). The Can-Lite PL range allows for the flange to twist off for easy maintenance or replacement of the Can-Lite PL Carbon Filters.
PLEASE NOTE:Â
There is a slight incompatibly when using these flanges with local ducting supplies – the exact flange measurements are as follows:
“100 mm” Flange: Inner diameter = 100 mm, outer diameter = 106 mm – Although a tight fit, our local 100 mm ducting fits over the flange reasonably easily.
“125 mm” Flange: Inner diameter = 125 mm, outer diameter = 130 mm – This outer diameter is just a bit too large to fit 125 mm ducting over ( We recommend using Aluminium Tape or Duct Tape to connect the ducting to this flange size, instead of trying to get the ducting to fit over the flange and then using a clamp to secure the ducting )
The Lumii Green LED Head Light is prefect for viewing light sensitive plants & indoor gardens in complete darkness without disturbing the night cycle. Illuminate your growing areaduring dark periods without interrupting your plants light cycle, with a green spectrum light. Now you can tend to you plants at night.
This lightweight, compact Green LED Head Torch, with 6 high intensity green LEDs, easily adjusts with its elastic band and tilting light mount.
Three lighting options – Full, Partial and Strobe (because disco)
Lumii Green LED Head Light Features:
Easily adjusts with elastic headband and tilting light mount.
Lightweight and compact.
Uses 3 x AAA batteries (not included).
Why a green work-light ?
Florigen is thought to be the flowering hormone responsible for triggering flowering production in plants.
For most photosensitive plants, florigen is only produced once the plant has experienced 12 hours of continuous darkness. In other words, it is the amount of darkness, not light, that triggers a plantâs flowering response.
Using a green light to work in your indoor garden during the plant’s “night time” has very little, if not no effect, on what the plants see to be total darkness, which means that Florigen production will not be hampered.
The 5lt Pressure Sprayer is a larger general purpose compression sprayer for garden and home use. A larger sprayer is handy when your plants require more than a liter or two’s worth of foliar feeding or pest control in one application. If foliar applications are made easy by having the right equipment available – more foliar applications will take place – and their positive effects will be enjoyed when harvest time comes around!
Large filling mouth for easy pouring and cleaning
Powerful pump mechanism pressurizes easy and fast in a smooth action, using the carrying handle to pressurize the sprayer’s contents
Ergonomic valve handle adjusts easily and features a locking mechanism for continuous spraying
Spray nozzle is adjustable, enabling anything form a direct jet to a fine spray application
Sprayer body includes an integrated pressure release valve for easy decompression
Sprayer comes with a shoulder strap for effortless mobility while spraying crops
Usage tips:
Add 2/3rds of final amount of water first, then your additives. Then add the last 1/3rd of water to the sprayer. This is helpful when using foamy additives and will help prevent accidental clogging of the suction straw inside the sprayer when working with gunky additives
Always shake the sprayer well before first use and after idle intervals between spraying
Do not OVER pressurize
Always do a test spray first, in a safe area away from plants to dial in nozzle setting and to clear out the contents of the suction straw and nozzle hose.
5lt Pressure Sprayer Maintenance tips:
Most of the sprayer’s working parts rely on lubrication to function properly – these parts will be lubricated from the factory, but will dry out over time. Try to keep your sprayer as clean as possible during use and storage, to prevent dust, dirt and debris from entering the sprayer.
These parts (in the photos below) can be cleaned and serviced periodically (when performance starts to diminish) and re-greased with a food safe grease or even petroleum jelly.
SeaBrix is a balanced plant and soil food comprising a broad range of macro, micro and trace minerals, including natural plant stimulating hormones, enzymes and amino acids.
The formulation of kelp, fish hydrolysate, amino acids and triacontanolis blended to maximize plant health and plant growth.
Dosage: 5-10ml/1â
Application instructions: Use 5ml/â water as a foliar spray or 10ml/â water as a soil drench. Use a 0,5% dilution when planting seeds and a 1% dilution for transplanting. Apply weekly as a full cover spray, ensuring thorough wetting of plant. Apply monthly soil drench around the plant roots. Shake well before use.
Compatibility: Biogrow Seabrix has been found to be compatible with most commonly used fertilizers. Physical compatibility should first be checked by using the current proportion of SeaBrix and other products in a small test jar. Growers should then test tank mix combinations for phytotoxicity on a sample of plants or crops prior to use. Do not apply in temperatures above 30ÂșC.
Precautions: Do not eat, drink or smoke while applying SeaBrix. Wash with soap and water after handling SeaBrix. Do not contaminate water, food or feed by disposal and do not re-use container. Destroy empty container and dispose of in a safe way.
Warnings: SeaBrix is harmful if swallowed and contact with eyes, skin and clothing should be avoided. SeaBrix should be kept out of reach of animals, children and uninformed persons. Store SeaBrix in its original container, in a cool, dry place, away from food and animal feed.
AC Infinity Self Watering Pot Bases – Pack of 4 x bases
Potted plant stand features a patented design that delivers water to fabric pots without active irrigation.
Automatically directs water up to your plant’s roots using the included adjustable length wick lines.
Heavy-duty drip tray collects runoff water for redelivery and can withstand planters up to 100 pounds.
Reservoir plate lifts your fabric pot off the ground to keep algae and other buildups from spreading.
Included gauge displays the current water level while the strainer spout enables quick replenishment.
PRODUCT DESCRIPTION
A set of wholly original under-trays designed for use with fabric pots to automatically deliver water to eliminate the need for active irrigation. The patented self-watering fabric pot base (US Patent #11877546) directs water up to your plant using high absorption wick lines that moisten the soil and roots. Its heavy-duty saucer stores runoff water and nutrients and, when used with the reservoir plate, can withstand up to 100 pounds. This plate elevates your fabric pot up off the ground to keep algae and other buildups from spreading. A water gauge is included to display water levels in the reservoir while the strainer spout on the other end enables quick pouring and replenishing.
AC Infinity Self Watering Pot Bases APPLICATIONS
The highly innovative self-watering base is a companion piece with potted planters made of nonwoven fabric that allow water to permeate and soak through. Each water delivery plant stand in this 4-pack set can support round fabric pots with up to 5-gallon capacities, weighing up to 100 pounds. You can set this anywhere traditional saucer trays and potted planters are found including spaces like:
Sonoff TH Origin 16Amp Smart Switch: a Temperature and Humidity monitoring WiFi smart switch, this switch does not have a LCD screen, like the TH ELITE. The Origin also does not have a Dry Contact Output. (Dry contact outputs act as relay triggers to turn high Amp equipment on on off – not very applicable to small grow spaces)
The TH Origin interfaces with the eWeLink home automation smartphone app, allowing you to monitor and automate your grow area, or other spaces like your home or office.
It can be programmed from the app to provide current (electricity) to equipment in many ways…
Schedules and Timers (Even schedules with 100âs of short ON and OFF cycles per day â as is necessary when doing aeroponics)
âScenesâ can also be set up, using data from the sensor that is plugged into the TH Elite – when certain conditions are met, the switch turns ON or OFF, e.g: IF Temperature sensor reads more than 28 degrees, turn Fan ON.
You can use the data from the TH Origin to control other Sonoff smart switches (even ones that work on the Zigbee protocol). Data from Zigbee sensors can also turn the TH Origin switch on or off.
IMPORTANT TO REMEMBER:
No system is perfect – always monitor your automation to ensure that your plants aren’t in danger!
Not all electrical equipment is suitable for remote operation â some may âlight upâ (Power up) when its smart switch engages (turns ON), but it may still need a person to press a button on the device, or its remote, before it will actually start to OPERATE.
Sensors for the TH Origin are SOLD SEPARATELY
This is the 16Amp version – do not wire up equipment of more than 16Amp!
The sensor connector has been upgraded to RJ11 which supports hot-plugging, making the connection more stable and reliable.
Features:
16A Max load
6 Months of Temperature and Humidity Historical Data by Hour. Data can be exported in .xlsx format and is accurate to an hour.
Local Automatic Control, Supportâs LAN control. You can set up 8 automatic control programs for you to save on electricity bills or create a comfortable environment.
Voice Control works with Alexa and Google Assistant.
5 Second refresh interval.
Specifications:
TH16 Origin: 16 Amp Peak
Model: THR316
THR316 Input/Output: 100-240V~ 50/60Hz 16A Max
Casing material: PC V0
Wi-Fi: IEEE 802.11 b/g/n 2.4GHz
Color: White
Dimensions: 98mm x 54mm
Compatible Sensor details:
The RL560 sensor extension cable can connect the SONOFF temperature and humidity sensors to extend your device’s distance. THS01, DS18B20 can be extended to 60M, and MS01 Soil Moisture Sensor can be extended to 10M.
The new Method Seven Cultivator LED FX Classic is an engineering marvel, designed in conjunction with Carl Zeiss Laboratories, opthamologists, optical physicists, and even an electrical engineer. Experience comfort and safety while working under the brightest full-spectrum LED lights, and most ceramic metal halide lights.
Full spectrum LED technology emits powerful and subtle narrow band radiation, and potentially UVC. It might look like an average sunny day under full-spectrum LED lights, but these “engineered spectrums” require overkill protection.
The FX lens is remarkable in its ability to get high levels of beneficial light into your eyes comfortably and safely, allowing your eyes to work more naturally, and with less strain. The FX lens also blocks some near infrared, which aids in keeping your eyes cool and moist. In addition to protecting your eyes under the bright lights of your indoor grow, the FX lens is fantastic for wearing outdoors on a hot sunny day.
The Method Seven Cultivator LED FX Classic provides great value and exceptional light balancing for full spectrum lights. These polymer lenses offer 100% UV protection plus an infrared exterior lens coating.
The Cultivator frame is made with an impact resistant high level polycarbonate, for a flexible and lightweight fit. This half-jacket frame includes no-slip rubber nose pads that hold the frame comfortably for hours, even in hot conditions. Certified by independent labs to meet or exceed International ANSI MSZ87+S and Canadian CSA Z94.3 specifications. This includes high velocity impact resistance. It’s great for outdoor trail running and mountain biking too!
Not for use with red, pink, or magenta spectrum LED lights.
The Mars Grow Tent 2.4m x 1.2m x 2m is very quick and easy to assemble and comprises of all the useful features you would expect. Provides a practical solution to creating a controlled horticultural environment.
It features top quality double thick Mylar with a 99% efficient reflective surface. The tents collect and then reflect any light emitted outside of the canopy footprint and delivers it directly back to the plant. These tents are designed to reflect the spectrum’s provided by Mars Hydro LED grow lights and other HID grow lights. HID Grow lights such as Metal Halide (MH) and High Pressure Sodium (HPS) lamps can also be used in this grow tent. This special surface easily outperforms any other grow tents available. The Mars Grow Tents are one of the first LED engineered Grow tent specifically for growing with Mars Hydro products.
Features of Mars Grow Tent:
Ultra-Reflective Lined Mylar for superior light reflectivity and dispersal.
Premium Mylar sides: 2X stronger & thicker than the competition.
Vented flaps with screens: helps maintain a light proof environment.
Steel construction: Including poles, fixture braces & corners.
Supports up to 65Kg fixture for a a safe grow environment.
Removable waterproof material floor liner tray: contains spills/water within tent.
Completely non-toxic bug and disease resistant âno off-gassingâ.
Step-by-step tent setup video below:
Mars Grow Tent 2.4m x 1.2m x 2m Specifications:
Material:Â Double thick Mylar fabric, all steel frame construction
Vent Size:Â 4Â x 7.5cm, 2Â x 20cm, 4Â x 25cm
Ventilation System: 1 x 20cm roof mount; 2 x 15cm upper side mount; 3 x 15cm square lower vents;
Mesh Window Size:Â 12.5cm x 50cm
Fixture weight capacity:Â 65Kg
Fixture hanging system 3 steel bar hanging and bracing system.
Additional Features Included waterproof material floor liner tray
Reflective Mylar Tent Skin
Full steel frame with fixture mounts
Assembly instruction & users guide
USAGE NOTES AND WARNINGS
Please read through all instructions. If grow tent is improperly installed and/or maintained, there is potential for damage or possible injury or death.
Assemble correctly to avoid tent tipping over and causing injury.
Use extreme care when handling sharp object in or around tent.
Do not place grow tent near a deck, stairs, chair, or other unsafe structure.
Do not hang equipment on or from grow tent that is above the supported weight range.
Keep electrical wires safely away from equipment and areas in and or around the tent that may collect water.
Do not expose grow tent to direct sunlight, near an open flame, or a heat source.
Do not use your grow tent if any part of your tent material is cracked, ripped, or broken.
Do not permit children to play on, in, or around grow tent.
Provide proper air circulation in your grow tent to prevent air from going stale.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy policyOk
