Sonoff Zigbee Bridge Pro

R680.00

In stock

Description

The Sonoff Zigbee Bridge Pro acts as a bridge between a WiFi network and the Zigbee protocol sensors that are installed in your grow area, or other areas in your home, workplace, etc.

 

The aim of such an installation (using the eWeLink home automation smartphone app) is to be able to:

  • Monitor the environment from your smartphone while you are away
  • Put electrical equipment on timers and schedules
  • Have electrical equipment turn ON or OFF when certain conditions are met. (E.G: IF Temperature sensor reads more than 28 degrees, turn Fan ON, or: IF Door sensor OPENS, send an alarm to my cellphone). The conditional operation of appliances and electronics is referred to as a “Scene” on the eWeLink smartphone app.

Combining a Sonoff Zigbee Bridge Pro with…

will allow you set up automated climate control for your grow area at a very reasonable price!
THIS ITEM DOES NOT COME WITH ITS OWN POWER SUPPLY – its short included USB cable will need to be plugged into a suitable power supply, like a computer, or phone charger.
IMPORTANT:
  • No system is perfect – always monitor your automation to ensure that your plants aren’t in danger!
  • The reliability of communication between the battery-powered Zigbee Temperature and Humidity Sensor and the mains-powered Zigbee Bridge is determined by the strength of the battery in the sensor, mains power supply to to bridge, and the distance between the Zigbee sensors and Zigbee smart switches and the Zigbee bridge.
  • Place all of the Zigbee equipment close to each other to optimize communication (Being in the same room or even the next room should be sufficient in most cases, although the sensor batteries will deplete quicker when placed further away from the bridge)
  • Zigbee routers can be installed if the sensors have to be installed far away from each other.
  • The Zigbee bridge also needs to be installed where there is a strong WiFi signal in order to be able to communicate with your eWeLink app effectively.
  • You can use the information from Zigbee sensors to turn regular WiFi Smart switches ON or OFF as well – you are not limited to only using Zigbee smart switches.
  • Regular WiFi smart switches however, of course need strong WiFi signal to operate properly when used in a eWeLink app “Scene”.
  • Not all electrical equipment is suitable for remote operation – some may “light up” (Power up) when its smart switch engages (turns ON), but it may still need a person to press a button on the device, or its remote, before it will actually start to OPERATE.

 

We stock the new Sonoff Zigbee Bridge Pro because:

  • The local smart scene always works well even when Wi-Fi is disconnected. Note that the local scene is for Zigbee devices only.
  • Built-in high-precision local RTC, a short power outage will not affect the time synchronization. Time schedule can return work once power restoration.

Features

  • Supports adding up to 128 sub-devices- Zigbee Bridge Pro supports adding sub-devices increased from 32 to 128.
  • Smart Home Security- Set up home security modes, such as home mode, away mode, and sleep mode. The bridge can be used as a local alarm.
  • Local Smart Scene- Timing and scene linkage between Zigbee devices can be executed normally even if the network is disconnected.
  • Wi-Fi & Zigbee Dual-protocol Support- Make communication between Zigbee devices and WiFi devices.
  • Strong Connectivity, Limitless Possibility- The Bridge supports to add ZigBee devices that Sonoff has released,  making your home smarter.

Specifications

  • Model: ZB Bridge-P
  • Input: 5v 1A
  • Wireless connections: Wi-Fi IEEE 802.11 b/g/n 2.4GHZ, Zigbee 3.0
  • Working environment: -10ºC-40ºC
  • Material: PC V0
  • Weight: 35g
  • Dimension: 62x62x20mm

Get more information and user manuals directly from the Sonoff website: HERE