Search Results for: ballast

Atami Rokzbastic Ripener / Finisher

Atami Rokzbastic Ripener / Finisher

Atami Rokzbastic Ripener / Finisher

Rokzbastic is a high-quality cocktail of minerals and biostimulants which is the perfect partner for achieving rock-solid frosty results. Get firmer, heavier and more compact flowers and fruits thanks to its PK value of 10-20, unique compared to other liquid flowering products on the market.

Rokzbastic has a P:K ratio of 1:2. This high potassium concentration especially favours the flowering of plants with a long flowering phase. Thus, its 10-20 PK value is the key to producing denser and firmer flowers and fruits. In addition, Rokzbastic is enriched with 1% iron and other essential elements to support many vital plant processes.

And like its family member Bloombastic, Rokzbastic is low in ballast substances (sodium and chlorine).

WHAT TYPE OF PLANTS IS ROKZBASTIC SUITABLE FOR?

Rokzbastic is a universal nutrient suitable for different types of vegetables and fruits, and is especially developed to meet the needs of plants with long flowering periods or high potassium requirements such as bell peppers, chillies, citrus fruits or red tomatoes.

It can also be used for ornamental plants with large flowers (e.g. hibiscus, roses or orchids). Experienced growers can measure the required dosage per plant, based on NPK values.

Suitable for cultivation in hydroponics, coco and soil and in manual and automatic irrigation systems.

Atami Rokzbastic Ripener / Finisher APPLICATION

Apply in the last 4 to 6 weeks of flowering throughout the whole fruiting and ripening phase together with your basic nutrients. Can be used in combination with Bloombastic to further exaggerate the stimulating effect of the flowering phase, increase yield and crop weight, as well as enhance natural flavours and aromas.

Use right after Bloombastic to maximise the effects of both products. When combining products with high PK values, always pay attention to the EC value of your nutrient solution, as there is a possibility of over fertilisation.

DOSAGE

0.5 – 1 ml per litre of water. Gives an increase of the E.C. value in your basic nutrient solution.

PK 10-20 W/W

T8 LED Tubes and Fittings 120cm

T8 LED Tubes and Fittings 120cm

T8 LED Tubes and Fittings 120cm:

REMEMBER TO BUY 2 LED TUBES FOR EACH FITTING : )

T8 Fixture Connector Advice

Low cost, slim-line and ultra light, these can easily be installed in cloning racks or propagation tents. They can also be hung vertically to be used as supplemental lighting for dark tent corners and in between plantings.

Each Double T8 LED Fitting is 1215mm long and fits 2 x T8 LED tubes. PLEASE NOTE: These fittings are not the same as older fluorescent fittings (which have ballasts and starters) and should not be used for fluorescent tubes!

Each Clear T8 LED Tube is 1200mm long, has a 18 Watt power draw, 6500K colour temperature, and Lumen output of 1600 Lumens. PLEASE NOTE: These tubes are not the same as older fluorescent tubes and should not be used in fluorescent fittings!

The LED tubes produce hardly any heat and can be hung as close to the cuttings or seedlings as possible to maximize the light intensity.

T8 LED Tubes and Fittings 120cm Assembly:

  • Always wire up and use correctly.
  • Never put strain on the connected electrical wire. Do not hang from electrical wire.
  • PLEASE NOTE: The holes of the hanging eyelets ( that are folded up, out of the casing, if needed, one on each side ) are too small to clip into standard rope ratchet clips. Use something like a round key-holder ring to go into the hanging eyelets and then clip the key ring into the rope ratchet clips if needed.
  • Take care when handling these units as they are light-duty items and can easily damage if dropped by accident.
  • For indoor use only

T8 Instructions

Bionova PK 13-14

Bionova PK 13-14 Various

Bionova PK 13-14: The original PK 13-14, Food grade minerals – Concentration 1:1500

NPK: 0-13-14

Thicker flowers

Bionova’s PK 13-14 is the perfect composition as a main flowering stimulator. Phosphor develops a healthy and extensive root system and an exuberant flowering. Potassium prompts the flowering potency in the plant. The combination of these two components in a food grade mineral form is the original Bionova’s superbloomer. Plants directly absorb all food grade minerals which gives you optimal control of your plants. Bionova is the inventor of the original composition: PK 13-14.

What is BioNova PK 13-14?

PK 13-14 is the perfect balanced combination of Phosphor and Potassium. Phosphor activates blooming inside any treated plant and Potassium prompts flowering and creates an exuberant flowering. It is sourced with food-grade minerals, which is one of the purest forms of minerals. Containing barely any ballast salts and heavy metals. This way the PK 13-14 is also directly absorbable by the root system, and no heavy metals will remain in the end product.

Tips from Bionova growers

✔ Use 1 to 2 ml PK 13-14 in 10 liters of water in the second week of the growing stage to promote a faster roots development.
✔ When deficiencies phosphorus (P) and potassium (K) occur, the plant. Mainly these conditions of immobilization and deprivation of elements for the cultivation are due to poor substrates and abnormal pH values of the nutrient solution. To cure deficient plants you can apply a solution of PK 13-14 with dilution rate of 2.5-5 ml in 10 liters of water by irrigation or foliar spray.

How to use ?

Should be applied from the first week of flowering until the final week of flowering.
Mixable with all Bionova fertilizers, stimulators, minerals, universals & substrates.
Can be used as irrigation and as foliar spray.

Application in irrigation: From start flowering until a week before harvest: 2-6ml per 10 liter of water.

Application as foliar: 2,5-5 ml per liter.

Garden HighPro ProTube Air Cooled Tube Reflector

Garden HighPro ProTube Air Cooled Tube Reflector

Garden HighPro ProTube Air Cooled Tube Reflector – for 150mm ducting

Pearl Technology stamped aluminum.
Prime European PVD coated aluminum
Light bulb adapter E-40
Secure wire connection box
Adapted for 250W - 600W HPS bulbs
Glass Tube Length = 40cm
Total Length = 62cm
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables

Air Cooled Tube Reflectors (cooltubes) are used in conjunction with inline extraction fans and ventilation ducting to remove heat generated by HPS lamps from a grow area – this can lower the temperate of the space by up to 5 degrees Celsius.

Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your Garden HighPro ProTube Air Cooled Tube Reflector with!

Garden HighPro PearlPro Reflector

Garden HighPro PearlPro Reflector

Garden HighPro PearlPro Reflector

Pearl technology stamped aluminum – prevents hot spots and provides a more even light distribution
Prime conventional aluminum
Light bulb adapter E-40
Secure wire connection box
Suitable for 400W – 600W HPS bulbs
47cm (L) x 47cm (W) x 11cm (H)
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables

Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your reflector with!

*Lamp not included (for illustrative purposes only)

Garden HighPro MaxLight Air Cooled Hood Reflector

Garden HighPro MaxLight Air Cooled Hood Reflector

Garden HighPro MaxLight Air Cooled Hood Reflector – for 150mm ducting

Pearl Technology stamped aluminum inner, matte black plastic outer casing
Hinged glass for easy cleaning and lamp replacement
Adapted for 250W – 600W HPS bulbs
61cm (L) x 48cm (W) x 22cm (H)
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables

Air Cooled Hood Reflectors are used in conjunction with inline extraction fans and ventilation ducting to remove heat generated by HPS lamps from a grow area – this can lower the temperate of the space by up to 5 degrees Celsius.

Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your hood with!

Garden HighPro PearlProXL Professional Reflector

Garden HighPro PearlProXL Professional Reflector

Garden HighPro PearlProXL Professional Reflector

Pearl technology stamped aluminum – prevents hot spots and provides a more even light distribution
Prime conventional aluminum
Light bulb adapter E-40
Secure wire connection box
Suitable for 400W – 600W HPS bulbs
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables

The reflector includes a clip-on heat-spreader ( This prevents potential light-burn of plant tops that are close to the grow-lamp )

This reflector is 55cm long and its wings can be adjusted to 3 positions – each having its own size of footprint on the growing floor…

Garden HighPro PearlProXL Professional Reflector Wing Footprints

Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your reflector with!

*Lamp not included (for illustrative purposes only)

T8 LED Tubes and Fittings 60cm

T8 LED Tubes and Fittings 60cm

T8 LED Tubes and Fittings 60cm:

REMEMBER TO BUY 2 LED TUBES FOR EACH FITTING : )

T8 Fixture Connector Advice

Low cost, slim-line and ultra light, these can easily be installed over propagators or inside a propagation tent. They can also be hung vertically to be used as supplemental lighting for dark tent corners and in between plantings.

Each Double T8 LED Fitting is 615mm long and fits 2 x T8 LED tubes. PLEASE NOTE: These fittings are not the same as older fluorescent fittings (which have ballasts and starters) and should not be used for fluorescent tubes!

Each Clear T8 LED Tube is 600mm long, has a 9 Watt power draw, 6500K colour temperature, and Lumen output of 810 Lumens. PLEASE NOTE: These tubes are not the same as older fluorescent tubes and should not be used in fluorescent fittings!

For best results 4 to 6 T8 tubes are recommended above a single large sized propagator, like the Garland XL High Dome Propagator.

The LED tubes produce hardly any heat and can be hung as close to the cuttings or seedlings as possible to maximize the light intensity.

 

 

NEW in store – 60cm T8 LED Fixture Hanging Frames (Below):

60cm T8 LED Fixture Hanging Frame 03

T8 LED Tubes and Fittings 60cm Assembly:

  • Always wire up and use correctly.
  • Never put strain on the connected electrical wire. Do not hang from electrical wire.
  • PLEASE NOTE: The holes of the hanging eyelets ( that are folded up, out of the casing, if needed, one on each side ) are too small to clip into standard rope ratchet clips. Use something like a round key-holder ring to go into the hanging eyelets and then clip the key ring into the rope ratchet clips if needed.
  • Take care when handling these units as they are light-duty items and can easily damage if dropped by accident.
  • For indoor use only

T8 Instructions

Atami Bloombastic Flowering Nutrient

Atami Bloombastic Flowering Nutrient

Atami Bloombastic Flowering Nutrient:

Bloombastic is a high-quality cocktail made of mineral and organic additives with a vegetable origin that is suitable for the last flowering and ripening phase (4-6 weeks) of the plant. Atami Bloombastic Flowering Nutrient increases the sugar content of your crop and therefore the weight and the smell. By means of an explosion of sugar and flower production Bloombastic provides thick, dense, sweet-smelling flowers.

Compared with other liquid flowering products, Bloombastic contains over 50% more bio-minerals (phosphorus and potassium) for which absolutely no ballast substances have been used (sodium and chlorine). Bloombastic also has an enzymatic influence in several areas, and therefore has a stress-preventing and recovering influence on the plant.

The combination of these features allows Bloombastic to replace various other products. Combining Bloombastic with (another) PK nutrient is not only unnecessary, but potentially risky, due to the risk of over fertilizing. Using Bloombastic together with e.g. B’cuzz Bloom Stimulator is a great way for growers further to exaggerate the flowering-phase stimulating effect. You can perfectly combine it with basic nutrients as well. It’s important to pay attention to the EC value of your nutrient solution.

This universal nutrient is suitable for many crops like different kinds of vegetables and fruits like chili peppers, strawberries, blueberries. It can also be used for flowering ornamental plants (e.g. Orchids, Violets). Experienced growers can measure the required dosage per plant, based on the NPK-values.

Application:

Apply in the last 4 to 6 weeks of flowering and ripening in combination with the basic nutrition. ATA Bloombastic can be used on any substrate (Soil, Hydro and Coco) and is suitable for all irrigation systems.

Dosage:

0.5 – 1.0ml per 1 liter of nutrient solution. Increases the E.C. value in your basic nutrient solution.

Composition:

P: 59 g/kg

K: 121g/kg

Fe: 990mg/kg

Low Chlorine

 

 

Garden HighPro LumaxPro HPS Lamps

Garden HighPro LumaxPro HPS Lamps

Garden HighPro LumaxPro HPS Lamps feature an optimized spectrum for photosynthesis. For use with magnetic and digital/electronic ballasts and any type of reflector or cooling hood with an E40 lamp holder.

Garden HighPro LumaxPro HPS Lamps Specs

LumaxPro 600W Spectrum

LumaxPro 400W Spectrum

LumaxPro 250W Spectrum

Proper lighting is a key ingredient in promoting robust, healthy growth as well as meeting the needs of various plant growth phases through optimized spectral outputs. Specifically tailored for the hydroponic and horticultural industries.

HIGH PRESSURE SODIUM – (HPS)

HPS bulbs are the most efficient bulbs that are commonly used by the hobby gardener. They are high in the red and yellow parts of the spectrum and low in the blue, this imitates the fall sun. Because of this spectrum some plants that are grown with HPS lights only can grow elongated and rather leggy, while many other plants are not effected by the light spectrum. For plants that normally bud and flower in the fall this is usually the light of choice because the light spectrum promotes flower production.

HPS bulbs are made out of a translucent ceramic arc tube containing a mixture of sodium, mercury and xenon gas. This arc tube is suspended in a outer glass shield (bulb). HPS bulbs range in power from 35w to 1000w, with the 250w, 400w, 600w and 1000w being the most popular for indoor horticulture.

HPS bulbs should be changed out after about 24 months. The bulbs slowly lose their brightness over time and to maintain good light quality the bulbs must be changed before the end of their rated life.

Garden HighPro LumaxPro HPS Lamps offer a great light spectrum at an affordable price!

 

Surge Protector

Surge Protector

A Surge Protector will protect your valuable electrical equipment from surges in electrical supply. When a sudden increase in voltage occurs, such as from a lightning strike or damage to a power line, the surge protector detects the excess current and safely diverts it through the house’s grounding path.

These “point of use” or “plug-in” Surge Protectors will only work if plugged into grounded electrical outlets in locations where electrical wiring has proper grounding installed. Have your location inspected by a certified electrician if you are not certain about your wiring – this small expense is well worth the cost when compared to the possibility of destroyed electronics and other equipment or damages caused by an electrical fire.

These surge protectors are not only able to protect your growing equipment but also other household items, such as persnal computers, fridges and freezers, televisions, Hi-Fi’s, gaming consoles, etc. It is also worth mentioning that these units will not protect against “brown-outs”, where the electrical supply drops to levels lower than normal. If protection against current drops is also a requirement, then a UPS unit will be a better option.

These units are rated at 16 Amp, 250 V

Read more about how surge protection works HERE.

Also see our Contact Relays – these are used when multiple lighting ballasts are powered on with a single timer. The relay will route the current through a 30 Amp relay when the ballasts come on, so that the time does not burn out.

Budget Birdwing Reflector

Budget Birdwing Reflector

Budget Birdwing Reflector – maximize your lighting output by beaming down all your light right onto your lovely indoor plantings.

Please note: The latest stock arrivals have a slight different build ( photos have been updated )

This reflector is fitted with an E40 lamp holder and male kettle plug fitting which can be used in combination with any suitable ballast and lamp combination. The reflector can be clipped into a set of rope ratchets, to enable easy up and down adjustment of your light.

The reflective metal sheet measures 46cm along the spine of the birdwing, with a width of around 40cm from wing tip to wing tip when already slightly curved inwards. ( 47cm when completely flat )

This reflector is able accommodate lamps of up a 5cm radius, which is adequate for most HPS and MH lamps.

The Budget Birdwing Reflector cord length is 4.5m

 

Lumii BLACK 600w HPS Dual Spec Lamp

LUMii BLACK 600w HPS Dual Spec Lamp

Lumii BLACK 600w HPS Dual Spec Lamp with an E40 fitting. Perfect for stimulating enhanced flowering, offers 18,000 life hours and 88,000 Lumens.

For best results, we recommend using them with a Lumii or Lumii BLACK Ballast.

 

 

Lumii Black 600w Electronic Kit

Lumii Black 600w Electronic Kit

The Lumii Black 600w Electronic Kit is supplied with the Lumii BLACK 600w Electronic Ballast, Lumii Black 600w Dual Spectrum lamp and the Lumii Black reflector.

The ballast features both a dim and a boost functions enabling you to control the light output from your lamp to your plants. It can be dimmed down to both 250w and 400w and also has a ‘super-lumens’ boost option (600w+Boost) which is on average a 10% increase in output.

This Lumii Black Lamp is a 600w Dual Spectrum HPS Lamp. It is an essential for stimulating enhanced flowering as it gives out 88,000 Lumens and lasts for up to 18,000 hours.

A Dutch Barn-Styled, Euro Reflector the LUMii Black Reflector does exactly what it should. Complete with lamp holder, mounting holes to attach rope ratchets to,  and a 4m length of kettle-plug cord.

We recommend using a 600w lamp for 600w dimmer settings, a 400w lamp for 400w dimmer settings and a 250w lamp for 250w dimmer settings.

Never boost a lower wattage lamp to a higher lamp setting.