You searched for inline%20fan - Page 4 of 5

Six Port Sprinkler Bubbler Manifold

Six Port Sprinkler Bubbler Manifold – an ideal component if you are building a small or medium sized automated watering system!

This economical sprinkler manifold screws into standard so called 1/2″ (approx. 17mm) male threaded sprinkler adaptor fittings and allows for the connection of up to 6 “5mm” irrigation lines. These 5mm watering lines (commonly in use in residential and agricultural irrigation and often referred to as micro-sprinkler piping) can each water an individual potted plant. Fewer lines can be utilized as well – simply leave the end caps that the unit comes with attached to each outlet that is not being used.

We currently stock straight 12mm Inline Tap Adaptors fittings and straight 15 mm Inline Tap Adaptor fittings – both of which are compatible with these manifolds. The only difference between these would be the size of irrigation line that would be used ( 12mm or 15mm ).

The water output per line per minute will of course be determined by the amount of water pressure that the Six Port Sprinkler Bubbler Manifold is connected to – pond pump normally do not provide lots of pressure, and if they are used, the pump may have to remain on for a longer period of time before the desired amount of water has been applied to each pot. A simple test can be run after the watering system has been installed, to see how many liters of water is provided by each outlet per minute – simply place an outlet inside of a measuring jug and use your smartphone’s stopwatch function to run the pump for one minute. Then see how much water has been added to the jug.

Multiple manifolds can be used to set up a single watering system, but remember that increased pump sizes / increased water pressures will be need as the number of manifolds are increased. The output of each manifold and 5mm irrigation line may also vary – depending on the way that the system is set up… if the water pressure in the main supply line is not equalized, the manifold furthest from the water source inlet will have a smaller flowrate than the closer ones. 5mm lines that are substantially longer than the others will also have a lesser flow-rate.

Analogue or digital timers can be used to automatically turn watering on and off during a 24 hr or weekly period.

USE PLUMBER’S TAPE ON THE MALE FITTING TO ENSURE A WATERTIGHT CONNECTION!!

TIP: A simple pressure-equalizing base can easily be constructed with a bit of piping and irrigation fittings, as in the picture below…

AC Infinity UIS 2-in-1 Splitter

AC Infinity UIS 2-in-1 Splitter, daisy chain adaptor dongle

A splitter dongle that expands control to multiple AC Infinity devices using a single UIS port.
Links same-type UIS devices together via splitters in a sequential daisy chaining arrangement.
Compatible with programming digital controllers including CONTROLLER 69 PRO and CONTROLLER 69.
Connects many grow devices like EC motor fans and LED grow lights in grow room and greenhouse settings.
Gives multiple UIS devices access to smart controls like triggers, timers, grow cycles, and schedules.

AC Infinity UIS 2-in-1 Splitter PRODUCT DESCRIPTION

A 2-in-1 splitter dongle designed to sequentially connect multiple same-type grow devices to our UIS controllers. Daisy-chain growing equipment like inline fans, grow lights, humidifiers, and more through a single port to set synchronized smart programming and expand your grow operation. Its compact build is engineered with premium cables to ensure a firm connection with UIS ports and connectors. Compatible with AC Infinity controllers like CONTROLLER 69 and CONTROLLER 69 PRO.

APPLICATIONS

This dongle is used to daisy chain multiple same-type smart devices together in a sequence to a single UIS controller port. Designed for use with male-to-male cords included with UIS devices and available for purchase individually. Compatibility includes future UIS devices, as well as the following:

AIRBLAZE Series – Fireplace Blower Fans
AIRLIFT Series – Shutter Exhaust Fans
AIRTITAN Series – Crawl Space & Basement Fans
CLOUDFORGE Series – Environmental Humidifiers
CLOUDLINE Series – Inline Duct Fans
CLOUDLIFT Series – Floor Wall Circulation Fans
CLOUDRAY Series – Clip-on Circulation Fans
IONBEAM Series – LED Grow Light Bars
IONBOARD Series – LED Grow Light Boards
IONGRID Series – Halo LED Grow Lights
Outlet Devices via UIS Outlet Control Plug

Flexipot 2 System AQUAValve5

Autopot 2 x SmartPot XL Aquavalve 5 System

The Autopot Flexipot 2 System AQUAValve5 combines our power-free, water efficient, low maintenance, modular systems with high performance fabric pots for the first time. Flexipots stimulate plant growth by aerating, feeding and guiding the root structure rather than merely containing it.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The porous BPA-free, lead-free Flexipot material allows improved gas exchange in the substrate. Free to breathe the root zone can see dramatically enhanced oxygen levels – supercharging growth.

When root tips reach the porous side of a Flexipot they are ‘air-pruned’ – deterred from extending any further by the air outside. Secondary roots then develop, creating a fibrous root structure with vastly improved moisture and nutrient uptake. Root circling is also thus eliminated making it possible to produce bigger plants from smaller pots.

Extremely durable and reusable the Flexipots are easily cleaned between uses if desired. Once emptied the Flexipots are best left to dry. After a few days any dust and small roots are easily brushed off. Whilst this level of cleaning is completely sufficient the Flexipot may be machine or tub washed in peroxide in order to sterilize. Do not put Flexipots in a tumble dryer.

An Autopot Flexipot 2 System AQUAValve5 contains all you need to set up an automated watering system with fabric pots. The compact size and portability that Flexipot brings means jaw-dropping reductions in shipping costs and much easier storage for stores and growers alike.

As with all of our systems the Flexipot System is easily extended so many pots can be linked to a single reservoir. The pots and trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up with a water and nutrient filled reservoir this extremely versatile, gravity-fed system will run automatically. It will completely take care of all your plants needs without the need for pumps, timers or intensive maintenance.

When growing in AutoPot Watering Systems it is essential that a Flexipot PotSock Round (PotSocks included) be fitted to the base of each Flexipot to provide root control.

Please note: Room humidity may be increased when growing with multiple Flexipots indoors due to the exposed, porous surface of the fabric pots.

Autopot Flexipot fabric pot size is 20L, and the pot has stitched on handles.

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.

Autopot Flexipot 2 System AQUAValve5 includes:

1 x 47ltr Tank, lid & 9mm Top hat grommet
1 x 9mm Filter
1 x 9mm Cross connector
2 x 1Pot XL Trays, with lids and grommets
2 x 20ltr Flexipot, with stitched on handles
2 x 9mm inline tap
2 x Autopot Flexipot Accessory Pack with AQUAVALVE 5 (Incl. 2 Round Flexipot Potsocks, 2 x 1 meters of 9mm Autopot piping)

Flexipot 2 System AQUAValve5 Instructions

Garden HighPro ProTube Air Cooled Tube Reflector

Garden HighPro ProTube Air Cooled Tube Reflector – for 150mm ducting

Pearl Technology stamped aluminum.
Prime European PVD coated aluminum
Light bulb adapter E-40
Secure wire connection box
Adapted for 250W - 600W HPS bulbs
Glass Tube Length = 40cm
Total Length = 62cm
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables

Air Cooled Tube Reflectors (cooltubes) are used in conjunction with inline extraction fans and ventilation ducting to remove heat generated by HPS lamps from a grow area – this can lower the temperate of the space by up to 5 degrees Celsius.

Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your Garden HighPro ProTube Air Cooled Tube Reflector with!

Garden HighPro MaxLight Air Cooled Hood Reflector

Garden HighPro MaxLight Air Cooled Hood Reflector – for 150mm ducting

Pearl Technology stamped aluminum inner, matte black plastic outer casing
Hinged glass for easy cleaning and lamp replacement
Adapted for 250W – 600W HPS bulbs
61cm (L) x 48cm (W) x 22cm (H)
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables

Air Cooled Hood Reflectors are used in conjunction with inline extraction fans and ventilation ducting to remove heat generated by HPS lamps from a grow area – this can lower the temperate of the space by up to 5 degrees Celsius.

Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your hood with!

Garden HighPro Exhaust Fans

These Garden HighPro ProFan Axial Inline Exhaust Fans offer great power and are very efficient for their size. Can easily be installed into a grow tent ducting sleeve or can be used as a booster fan inside a length of ventilation ducting.

FANS ARE NOT BLACK, BUT A DARK ARMY GREEN / GREY-GREEN OLIVE COLOUR

Fitted with a ZA 2-pin plug (90 cm cord length)

PLANTiT Water Timer

PLANTiT Water Timer: Can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. With controls for duration and frequency link it up to your irrigation line and the timer does the rest. It has 2 easy steps for programming. Turn the RUN TIME dial to desired irrigation duration and the FREQUENCY dial to set the time between irrigations.

This timer is ideal for watering allotments, lawns, garden, shrubs, pots, hanging baskets, patio irrigation, roof garden, holiday watering and sprinkler. It is weather resistant and battery operated with an auto safety valve shut off when the battery power is low.

This controller has a program delay button for when you need to do plant maintenance work and comes with all the required fittings and an inline filter. It has a working pressure range of 0- 150 PSI (0-10 BAR) and includes the required connector fittings.

You can select the frequency of irrigation to every 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or 1 week and with a run time of 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes.

BATTERIES NOT INCLUDED ( Requires 2 x 1.5V AAA Batteries )

Connection – City Water Supply: Screws onto a 3/4″ male threaded garden tap outlet

Connection – Water Tank: Connect the included piping stub ( 12mm Inner Diameter ) to your water tank’s supply line and add the included particulate water filter ( if necessary ) before adding the PLANTiT Water Timer to the supply line.

Garden HighPro ProActiv Carbon Filters

Garden HighPro ProActiv Carbon Filters – extremely light, single-use carbon filters.

ProActiv Carbon Filters use only 100% food grade virgin coconut activated carbon, encased in multi-layer fleece mats that are sealed air-tight on both ends of the scrubber.

Installation is super easy – just clip each end of the filter onto a rope ratchet and attach your ducting!

Get rid of unwanted odours by attaching a carbon filter before your exhaust fan/s.
In a closed-system grow area, cycle your air through a carbon filter to help keep it free from dust, mold spores and bacteria. (Be sure to DEHUMIDIFY – carbon filters stop working in 85% + R.H. environments !)
Clean and scrub your incoming air supply and stop pests like spider mites and others from getting into your grow area by installing a carbon filter before your inlet fan/s.

How match your Garden HighPro ProActiv Carbon Filters up with the correct sized inline fans:

1) First, determine how much air-flow your will need through your grow space. If you are using fans to exhaust heat caused by hot HPS grow-lamps, a quick calculation can be done…

Number of lamps × Watts of each lamp ÷ 2 = Required cubic meters per hour of air flow needed.

(We recommend adding × 1.2 to this answer for our HOT ZA summers!)

2) Find one or more fans (whichever will best suit your area) that will provide a total airflow =/> than what has been worked out in step 1.

3) Match up each of your chosen fans with a carbon filter of the same diameter (preferably, to avoid the additional cost of ducting reducers). Also check the filter length if installing in cramped spaces.

VERY IMPORTANT: ALSO make sure that the filter’s air-flow capacity matches or exceeds the fan’s airflow rating, using the ProActive Filter table below. If too much air passes through the filter, it will not be able to scrub the passing air thoroughly!

4) Once your fans and filters have been matched up, it’s time to work out how many meters of ducting your will need, as well as other accessories, like Rope Ratchets, Ducting Clamps, or rolls of Aluminium Tape.

12mm-9mm In-line filter

The 12mm-9mm inline filter allows easy connection to 12mm pipe. The filter then reduces to 9mm allowing easy connection to 9mm Autopot Piping providing the trunk-line for any AutoPot Watering System of between 1 and 6 modules, that uses the new Aquavalve 5. The fitting also has an internal filter that can be accessed with ease ensuring cleaning is made simple.

Ducting

Ducting is used to connect inline fans with items like spigot flanges, Air Carbon scrubbers or other fittings .

This flexible aluminium Ducting is specifically produced for low and medium pressure heating, cooling, ventilation, exhaust and air conditioning systems. It is produced from multi-layer aluminium, strengthened with high tension hard steel spring wire. It has high elasticity and flexibility. It can be easily fitted to circular, oval or rectangular connectors.

Keep in mind: It is ideal to keep your ducting pulled as tight as possible to reduce resistance thus ensuring maximum airflow. The more bends and corners you put in, the more you are reducing the fans capability.

Sizes: 102mm, 127mm, 152mm, 203mm , 254mm, 317mm

Prices are per meter, max length of single piece of ducting = 10 meters. ( Example: if ordering 15 meters, you will receive 1 x 10 meter length and 1 x 5 meter length )

RAM Bug Barrier

The RAM Bug Barrier is a fine mesh screen for intake fans to prevent insects in your grow room. Eliminate unwelcome visitors and debris from getting into your garden without losing airflow. The mesh screen comes with Velcro strips for you to attach to your intake fan to allow for easy installation. The RAM Bug Barrier fits over your inline fan and the ducting can then be put over the RAM Bug Barrier and secured with a ducting clamp.

Sizes available:

100 mm
150 mm
200 mm
250 mm

Sold individually

Cooltube Reflector

The Cooltube Reflector is an air-tight, fully sealed clear glass tube with a lamp mounting bracket in its center on the one end. Cooltube Reflectors are perfect for removing the excess heat generated by HPS or Metal Halide grow lights.

PLEASE NOTE: NEW Cooltubes now have detachable side wings instead of being permanently attached on hinges that flip the wings up or down. (See photos on the left)

Cooltubes were one of the first air cooled reflectors to become available and all these years later they are still a firm favorite with many growers. They are effectively an inline glass tube that allows you to extract air through the reflector and over your lamp, taking the heat away before it can raise the temperature of your grow room. (Instructional video here)

Cooltubes can be mounted in series along the same length of flexible aluminium ducting.

The Cooltubes have a rounded internal reflector (inside the glass tube), as well as foldable outside reflector wings, for a slightly tighter light spread. They have a mounting hook on each side, to suspend from rope ratchets, come with a 4.5 m long male kettle plug power cord and can be used with up to 1000 Watt bulbs. The hood is fitted with a ceramic E40 light fitting.

Length of 6″ tube (150 mm diameter), end to end: 62 cm

Width of 6″ cooltube when reflector wings are folded out (tip to tip): 28 cm

Length of 8″ tube (200 mm diameter), end to end: 72 cm

Width of 8″ cooltube when reflector wings are folded out (tip to tip): 35 cm

12mm-6mm In-line filter

The 12mm-6mm inline filter allows easy connection to 12mm pipe. The filter then reduces to 6mm allowing easy connection to any AutoPot Watering Systems of between 1 and 6 modules. The fitting also has an internal filter that can be accessed with ease ensuring cleaning is made simple

Click Fit Tank Adapter and Filter 12mm

The Click Fit Tank Adapter and Filter 12mm is designed to be used with all sizes of FlexiTank or any other large tank. The Click Fit Tank Adapter and Filter 12mm is simply pushed onto the tap provided. The 12mm filter is incorporated along its length to filter the water before it moves along to the other connected pipes. This fitting allows the user to push 12mm pipe, (Hosepipe) onto the end of the adapter.

The filter resides within the length of the fitting. It reduces impurities in the water before it enters the pipework connected to the AQUAvalves trays and pots. This helps prevent the build up of sediment and the clogging of pipework.

You should always use a filter with all AutoPot Watering Systems, it is very important that you check and clean the filter regularly. If you use an inline filter it should be cleaned every 2-4 weeks. A poorly maintained filter can result in disrupted nutrient solution supply and even block the AQUAvalves.

Generally, if you keep clean and make sure your reservoir and AutoPot trays do not get contaminated with debris, your AQUAvalve should work perfectly for the duration of your crop. If you are growing long term crops you should service your AQUAvalves every 3 months.

(Sold individually, of course)

Autopot Easy2Go Kit

The Autopot Easy2Go Kit is the ultimate holiday watering kit for happy, healthy plants. By incorporating the patented Autopot AQUAvalve, the Easy2Go Kit will keep plants watered for weeks using a simple gardening tray and water butt. The Easy2Go Kit is placed directly onto a tray (not included) along with your potted plants and distributes water to the pots from below.

Kits that include the new Autopot Aquavalve 5, which works with 9mm Autopot piping are now also available.

Using coco coir substrate mixes in your pots will be very advantageous for watering from below, as the coir does a great job of soaking and dispersing water throughout the whole pot’s volume over time.

Unlike other holiday watering kits, the Easy2Go Kit provides optimum levels of water to meet the plants’ requirements – without the need for timers or electricity – ensuring healthy, correctly watered plants upon your return.

The Autopot Easy2Go Kit can be installed anywhere in the home, greenhouse, conservatory or patio and multiple kits can be linked together to keep larger amount of plants watered while you’re away.

This inexpensive, flexible system can be assembled in minutes and contains all fittings required to connect to a reservoir of your choice. You only need a water container with a minimum 30 liter capacity and a flat based gardening tray with a minimum depth of 30mm. (A hole may need to be drilled into the base of your water reservoir if no suitable valve or tap is already in place).

Autopot Easy2Go Kits include:

1 x Aquavalve OR Aquavalve 5
1 x Aquavalve Cover – to hold down and level out the valve
1 x 1.5m length of Autopot piping (thickness depends on type of kit)
1 x Top Hat Grommet (size corresponding to pipe thickness). Used when directly sticking Autopot piping through hole drilled into water reservoir. (9.5mm hole for “6mm” Top Hat Grommets and older Aquavalves. 12.5mm hole for “9mm” Top Hat Grommets for the new Aquavalve 5)
1 x Square Sponge filter that may be stuck into Autopot piping inside of reservoir if required
1 x Inline filter reducer, if reducing water supply line down from for instance 12mm irrigation piping, or thin garden hose.

Easy2Go Kit Instructions

Search Results for: inline%20fan