PLANTiT Water Timer
R480.00
Automate your watering and forget about it. The PLANTiT Water Timer connects to mains tap water or a gravity-fed tank, water butt or reservoir — set the duration and frequency, link it to your irrigation line, and the timer does the rest.
- Two-step setup: turn the RUN TIME dial for duration and the FREQUENCY dial for the gap between waterings.
- Mains or gravity: works with a tap outlet or low-pressure gravity feed from a tank.
- Fail-safe: weather-resistant, with an auto safety valve that shuts off when battery power is low.
- Maintenance mode: a program-delay button pauses watering while you work on your plants.
Working pressure range 0–150 PSI (0–10 BAR); comes with the required connector fittings and an inline filter. Frequency options: every 1, 2, 3, 4, 6, 8, 12, 24, 48 or 72 hours, or once a week. Run-time options: 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes. Batteries not included (requires 2× 1.5V AAA). Ideal for allotments, lawns, gardens, shrubs, pots, hanging baskets, patios, roof gardens and holiday watering.
In stock
Description
PLANTiT Water Timer: Can be used with mains water from a tap outlet or with a gravity feed system from a tank, water butt or reservoir. With controls for duration and frequency link it up to your irrigation line and the timer does the rest. It has 2 easy steps for programming. Turn the RUN TIME dial to desired irrigation duration and the FREQUENCY dial to set the time between irrigations.
This timer is ideal for watering allotments, lawns, garden, shrubs, pots, hanging baskets, patio irrigation, roof garden, holiday watering and sprinkler. It is weather resistant and battery operated with an auto safety valve shut off when the battery power is low.
This controller has a program delay button for when you need to do plant maintenance work and comes with all the required fittings and an inline filter. It has a working pressure range of 0- 150 PSI (0-10 BAR) and includes the required connector fittings.
You can select the frequency of irrigation to every 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours or 1 week and with a run time of 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes.
BATTERIES NOT INCLUDED ( Requires 2 x 1.5V AAA Batteries )
Connection – City Water Supply: Screws onto a 3/4″ male threaded garden tap outlet
Connection – Water Tank: Connect the included piping stub ( 12mm Inner Diameter ) to your water tank’s supply line and add the included particulate water filter ( if necessary ) before adding the PLANTiT Water Timer to the supply line.
