HID Probox ECOPRO 1.2m Tent Kit Min
Spiral LED Lamps 36W –Â Energy saving replacements for traditional Fluorescent CFLs, available with E40 or E27 screw-in fittings. These lamps have a 6000K color temperature and are popular for seedlings and cuttings, an excellent way to establish young plants. They are good for shelf gardening because their low heat allows you to place lights on shelves that are stacked on top of each other. Smaller plants and seedlings can thrive in a well-designed indoor garden lit with LED grow lights.
6000k is great for germinating, seedlings, cuttings and the vegetative life stage.
When plants are young, high output lighting can be too intense, causing them stress and negatively affecting growth. Instead, cuttings and seedlings can be placed under smaller LED lights until they are ready to move on into the veg or even the bloom rooms.
During propagation or cloning, lights should be kept on for 18 hours a day, although many growers find that quicker growth is achieved by keeping them on constantly, without a night period at all.
Because of these lamps’ low running temperature they are ideal for growing in small spaces and their low power usage keeps costs low for the small scale grower. They are an excellent option during the vegetative stage because they can be placed much closer to the plant’s foliage, which tends to encourage the plant to remain short and stocky – favorable characteristics to look for when growing indoors.
E40 lamps fit reflectors that are normally used for HPS lighting. ( These reflectors come with male kettle plug cords, not 3-pin plug cords, but they can be converted for use with a LED spiral lamp with a suitable female kettle plug to 3-pin plug cord, or by snipping the kettle plug and replacing with a 3-pin plug )
If you use a reflector – your light output is maximized by bouncing most of the emitted light down onto your plants.
Spiral LED Lamps 36W SPECS:
3000 Lumens
6000K Color Temperature ( Tone )
Length: 205mm
Diameter: 75mm
Garden HighPro ProTube Air Cooled Tube Reflector – for 150mm ducting
Pearl Technology stamped aluminum. Prime European PVD coated aluminum Light bulb adapter E-40 Secure wire connection box Adapted for 250W - 600W HPS bulbs Glass Tube Length = 40cm Total Length = 62cm Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables
Air Cooled Tube Reflectors (cooltubes) are used in conjunction with inline extraction fans and ventilation ducting to remove heat generated by HPS lamps from a grow area – this can lower the temperate of the space by up to 5 degrees Celsius.
Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your Garden HighPro ProTube Air Cooled Tube Reflector with!
Garden HighPro PearlPro Reflector
Pearl technology stamped aluminum – prevents hot spots and provides a more even light distribution
Prime conventional aluminum
Light bulb adapter E-40
Secure wire connection box
Suitable for 400W – 600W HPS bulbs
47cm (L) x 47cm (W) x 11cm (H)
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables
Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your reflector with!
*Lamp not included (for illustrative purposes only)
Garden HighPro MaxLight Air Cooled Hood Reflector – for 150mm ducting
Pearl Technology stamped aluminum inner, matte black plastic outer casing
Hinged glass for easy cleaning and lamp replacement
Adapted for 250W – 600W HPS bulbs
61cm (L) x 48cm (W) x 22cm (H)
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables
Air Cooled Hood Reflectors are used in conjunction with inline extraction fans and ventilation ducting to remove heat generated by HPS lamps from a grow area – this can lower the temperate of the space by up to 5 degrees Celsius.
Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your hood with!
Garden HighPro PearlProXL Professional Reflector
Pearl technology stamped aluminum – prevents hot spots and provides a more even light distribution
Prime conventional aluminum
Light bulb adapter E-40
Secure wire connection box
Suitable for 400W – 600W HPS bulbs
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables
The reflector includes a clip-on heat-spreader ( This prevents potential light-burn of plant tops that are close to the grow-lamp )
This reflector is 55cm long and its wings can be adjusted to 3 positions – each having its own size of footprint on the growing floor…
Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your reflector with!
*Lamp not included (for illustrative purposes only)
The Garden HighPro MediPro Plant Guardian is here to save your plant tops from the intense heat emitted by hot HPS lamps!
The Medipro marks off the required distance between your plants and lamp, with each stick in the modular system measuring 10cm (with 5 sticks in the set). Fit the heat resistant clip over the E40 light fitting of your reflector, with the right number of measuring sticks screwed onto it. Now you will reduce the risk of having your light fixture too close to your plants. A mini thermo hygrometer is also included and can be attached at the other end of the Garden HighPro MediPro to indicate temperature and humidity in the area of the leaf-tops.
Garden HighPro ProActiv Carbon Filters – extremely light, single-use carbon filters.
ProActiv Carbon Filters use only 100% food grade virgin coconut activated carbon, encased in multi-layer fleece mats that are sealed air-tight on both ends of the scrubber.
Installation is super easy – just clip each end of the filter onto a rope ratchet and attach your ducting!
1) First, determine how much air-flow your will need through your grow space. If you are using fans to exhaust heat caused by hot HPS grow-lamps, a quick calculation can be done…
Number of lamps × Watts of each lamp ÷ 2 = Required cubic meters per hour of air flow needed.
(We recommend adding × 1.2 to this answer for our HOT ZA summers!)
2) Find one or more fans (whichever will best suit your area) that will provide a total airflow =/> than what has been worked out in step 1.
3) Match up each of your chosen fans with a carbon filter of the same diameter (preferably, to avoid the additional cost of ducting reducers). Also check the filter length if installing in cramped spaces.
VERY IMPORTANT: ALSO make sure that the filter’s air-flow capacity matches or exceeds the fan’s airflow rating, using the ProActive Filter table below. If too much air passes through the filter, it will not be able to scrub the passing air thoroughly!
4) Once your fans and filters have been matched up, it’s time to work out how many meters of ducting your will need, as well as other accessories, like Rope Ratchets, Ducting Clamps, or rolls of Aluminium Tape.
Budget Birdwing Reflector – maximize your lighting output by beaming down all your light right onto your lovely indoor plantings.
Please note: The latest stock arrivals have a slight different build ( photos have been updated )
This reflector is fitted with an E40 lamp holder and male kettle plug fitting which can be used in combination with any suitable ballast and lamp combination. The reflector can be clipped into a set of rope ratchets, to enable easy up and down adjustment of your light.
The reflective metal sheet measures 46cm along the spine of the birdwing, with a width of around 40cm from wing tip to wing tip when already slightly curved inwards. ( 47cm when completely flat )
This reflector is able accommodate lamps of up a 5cm radius, which is adequate for most HPS and MH lamps.
The Budget Birdwing Reflector cord length is 4.5m
Lumii Growroom Lenses are designed to alter the orange light of HPS lamps to be like natural daylight. This aids in the identification of pests and diseases and allows you to see and work easier – all without having to turn off your grow lights.
The Cooltube Reflector is an air-tight, fully sealed clear glass tube with a lamp mounting bracket in its center on the one end. Cooltube Reflectors are perfect for removing the excess heat generated by HPS or Metal Halide grow lights.
These Cooltubes have detachable side wings instead of being permanently attached on hinges that flip the wings up or down. (See photos on the left)
Cooltubes were one of the first air cooled reflectors to become available and all these years later they are still a firm favorite with many growers. They are effectively an inline glass tube that allows you to extract air through the reflector and over your lamp, taking the heat away before it can raise the temperature of your grow room. (Instructional video here)
Cooltubes can be mounted in series along the same length of flexible aluminium ducting.
The Cooltubes have a rounded internal reflector (inside the glass tube), as well as foldable outside reflector wings, for a slightly tighter light spread. They have a mounting hook on each side, to suspend from rope ratchets, come with a 4.5 m long male kettle plug power cord and can be used with up to 1000 Watt bulbs. The hood is fitted with a ceramic E40 light fitting.
Length of 6″ tube (150 mm diameter), end to end: 57 cm
Width of 6″ cooltube reflector wings (tip to tip): 27 cm
Length of 8″ tube (200 mm diameter), end to end: 72 cm
Width of 8″ cooltube reflector wings (tip to tip): 35 cm
The Lumii Black 600w Electronic Kit is supplied with the Lumii BLACK 600w Electronic Ballast, Lumii Black 600w Dual Spectrum lamp and the Lumii Black reflector.
The ballast features both a dim and a boost functions enabling you to control the light output from your lamp to your plants. It can be dimmed down to both 250w and 400w and also has a ‘super-lumens’ boost option (600w+Boost) which is on average a 10% increase in output.
This Lumii Black Lamp is a 600w Dual Spectrum HPS Lamp. It is an essential for stimulating enhanced flowering as it gives out 88,000 Lumens and lasts for up to 18,000 hours.
A Dutch Barn-Styled, Euro Reflector the LUMii Black Reflector does exactly what it should. Complete with lamp holder, mounting holes to attach rope ratchets to, and a 4m length of kettle-plug cord.
We recommend using a 600w lamp for 600w dimmer settings, a 400w lamp for 400w dimmer settings and a 250w lamp for 250w dimmer settings.
Never boost a lower wattage lamp to a higher lamp setting.
Sunmaster Dual Spectrum 400W
For growers who don’t want to use a Metal Halide bulb for vegetative and a High Pressure Sodium bulb for flowering, Sunmaster have developed their Dual Spectrum range of bulbs.
It is a High Pressure Sodium bulb with an enhanced blue spectrum. This blue light means the bulbs can be used in the vegetative stage as well as the flowering where plants need the orange and red spectrum.
Product Description
Venture Sunmaster HPS Dual Spectrum (for growth and bloom):
– Increases chlorophyll content for a deeper green and healthier plants
– Promotes a greater leaf area / -mass
– prevents unnatural stem elongation
– produces thicker main stems
– similar to blue deficiencies of HPS
– promotes earlier flowering and number of flowers
– support accelerated linear growth
– increasing the total number of branches and internodes
– delivers an increased fruit weight
– produced higher yields (total biomass)
Ballast is required to fire lamp
Sunmaster Dual Spectrum 400W Specifications:
Voltage: 220V
Frequency: 50Hz
Power: 400W
Base Type: E40
Dimensions: 46 mm x 260 mm
Color temperature: 2000K
Luminous flux: 55000 Lm
Lifetime: 24000 hours
Burning position: universal
Sunmaster Dual Spectrum 600W
For growers who don’t want to use a Metal Halide bulb for vegetative and a High Pressure Sodium bulb for flowering, Sunmaster have developed their Dual Spectrum range of bulbs. It is a High Pressure Sodium bulb with an enhanced blue spectrum. This blue light means the bulbs can be used in the vegetative stage as well as the flowering where plants need the orange and red spectrum.
Product Description
Venture Sunmaster HPS Dual Spectrum (for growth and bloom):
– Increases chlorophyll content for a deeper green and healthier plants
– Promotes a greater leaf area / -mass
– prevents unnatural stem elongation
– produces thicker main stems
– similar to blue deficiencies of HPS
– promotes earlier flowering and number of flowers
– support accelerated linear growth
– increasing the total number of branches and internodes
– delivers an increased fruit weight
– produced higher yields (total biomass)
Ballast is required to fire lamp
Sunmaster Dual Spectrum 600W Specifications:
Voltage: 220V
Frequency: 50Hz
Power: 600W
Base Type: E40
Dimensions: 46 mm x 285 mm
Color temperature: 2000K
Luminous flux: 90000 Lm
Lifetime: 24000 hours
Burning position: universal
An E40 Lamp Holder device which mechanically supports a lamp for the purposes of making electrical contact with the lamp.
E40 Lamp Holder fitting is commonly used for horticultural lamps. Useful for growers who are creating their own lighting fixtures or those who have no need for a reflector. The holder is suitable for use with all CFLs, MH and HPS lamps.
Please note: Our E40 socket CFL lights (85 Watt and 140 Watt) emit a colour temperature of 6400K ( “Cool Blue” ), ideal for vegetative growth. Our 2700K (“Warm White”) CFL lights (200 Watt), also E40 light fitting.
We suggest starting off with 140 Watt Cool Blue E40 CFL’s if you are planning to switch colour temperatures during the later stages of your grow cycle.
