The Garland Propagator Thermometer is an ideal thermometer to ensure the correct temperature for seed germination and propagating cuttings. Insert thermometer stem into propagator compost.
This handy little Garland Propagator Thermometer is ideal for keeping an eye on the internal temperature within your propagator. It will help you create the perfect temperature for your seedlings and cuttings. This results in faster and even germination and rooting. It is recommended that you check the instructions on individual seed packets for the best results.
The Garland Self Watering Propagator helps with maintaining optimal growing conditions which is essential for successful seed germination. A propagator can help but careful and managed watering is also required.
This range of self watering propagators feature an internal water reservoir. The growing trays are supported above the reservoir on raised platforms which are in turn covered in capillary matting. The plants draw the water naturally from the capillary matting as required.
This 5 piece set is the perfect size to sit comfortably on a window sill and includes:
reservoir tray
support platform,
12 cell growing tray
capillary matting
clear cover
Each of the growing cells measures 5cm x 4.7cm x 5.8cm deep and has a capacity of 0.1 litres.
With the exception of the capillary matting and the clear covers, this unit is made from recycled plastic. The growing tray can be re-used and can be easily sterilized in a dishwasher.
Size: 37.5cm (15″) Long 13.5cm (5.25″) Wide 16cm (6.25″) High
Garland Large High Dome Propagator is a very popularly sized unit using a standard seed tray as a base designed by Garland. The base does not have drainage holes, and the cover features an easy to adjust ‘dial’ ventilationhole.
The lid is Injection molded in crystal clear shatter resistant material. The Garland Large Dome Propagator is an unheated high dome propagator which is perfect for cuttings because of the high dome.
Dimensions – 37.5cm (l) x 23cm (w) x 18cm (h)
This is a Premium range of propagation, all made from high quality recycled plastics. These items are super strong and durable, with thicker wall sections offering extra rigidity.. The trays are easy to clean and can even be put in a dishwasher. Although injection molded trays are generally more expensive than vacuum formed equivalents, they will easily last for 10 years or more.
The Garland XL High Dome Propagator is an unheated high dome propagator designed by Garland and to our knowledge one of the largest injection molded propagator on the market. The base tray of the Garland XL High Dome Propagator does not feature drainage holes, given that most users opt to fill the unit with smaller trays or pots or multi cell inserts.
PLEASE NOTE: BASE COLOR MAY BE EITHER GREEN OR BLACK, DEPENDING ON AVAILABILITY.
The lid of the Garland XL High Dome Propagator is Injection molded in crystal clear shatter resistant material. The lid features 2 adjustable ‘dial’ ventilators to control the humidity and optimize growing conditions
Dimensions – 58cm (l) x 40.5cm (w) x 22.5cm (h)
This is a Premium range of propagation, all made from high quality recycled plastics. These items are super strong and durable, with thicker wall sections offering extra rigidity. The trays are easy to clean and can even be put in a dishwasher. Although injection molded trays are generally more expensive than vacuum formed equivalents, they will easily last for 10 years or more.
Propagators are simple to obtain and provide an ideal start for young plants. A propagator holds in humidity and warm air while allowing seedlings to receive light. This an easy way to maintain a good environment for very young seedlings . However, since the cover prevents normal air movement (which is very important as it encourages young plants to grow strong stems), seedlings should not be kept in a covered propagator for too long.
Once the young plants produce their second or third pair of leaves, or if they grow taller than about 7 cm with only the first pair, the cover of the propagator should be removed. A small oscillating fan on the lowest setting is a good way to give indoor plants the air movement they need, while outdoor plants can start to receive the natural outdoor air movement when they have reached this size.
The Garland Small High Dome Propagator creates the perfect growing conditions for seeds and cuttings and is ideally sized for the windowsill.
The base tray features a generous 6cm planting depth, without any drainage holes, in order to promote healthy plant development.The lid is Injection molded in crystal clear shatter resistant material and features the easy to adjust ‘dial’ ventilator. The Garland Small Dome Propagator is an unheated high dome propagator which is perfect for cuttings because of the high dome.
This is a Premium range of propagation, all made from high quality recycled plastics. These items are super strong and durable, with thicker wall sections offering extra rigidity. The trays are easy to clean and can even be put in a dishwasher. Although injection molded trays are generally more expensive than vacuum formed equivalents, they will easily last for 10 years or more.
The base (including lip edges) measures 32 cm x 21 cm, providing ample room for propagation. The ridged base raises seed trays and rockwool cubes from the bottom of the tray, allowing for drainage of excess water. The plastic thickness of the base is very similar to our Humidity Dome bases – thinner and more bendable than a hard plastic base (e.g. Garland Propagators) but still durable enough for light use over time.
The clear dome lid is also made of a very acceptable plastic thickness (not as thick and rigid as a Garland hard plastic dome top, yet ideal for light to moderate use over time) and feature a ventilation port on the top of the dome.
Set up your ROOTiT Small Propagator in conjunction with heat mats, temperature controllers, CFL lighting, etc., to create the perfect conditions for your seeds and cuttings to thrive in!
The ROOTiT Small Propagator can comfortably fit 2 x small seedling trays, e.g. 4 cell, 6 cell, 8 cell and 12 cell.
The base (including lip edges) measures 57 cm x 36 cm, providing lots of room for propagation. The ridged base raises seed trays and rockwool cubes from the bottom of the tray, allowing for drainage of excess water. The plastic thickness of the base is very similar to our Humidity Dome bases – thinner and more bendable than a hard plastic base (e.g. Garland Propagators) but still durable enough for light use over time.
The clear dome lid is also made of a very acceptable plastic thickness (not as thick and rigid as a Garland hard plastic dome top, yet ideal for light to moderate use over time) and feature two ventilation ports on the top of the dome.
Set up your ROOTiT Large Propagator in conjunction with heat mats, temperature controllers, CFL lighting, etc., to create the perfect conditions for your seeds and cuttings to thrive in!
The 30mm Microgreen Tray Mesh Bottom is 275mm wide and 535mm long. The mesh bottom makes this tray suitable for multiple uses.
With its low 30mm height, it can be filled to the brim using only about 4.5 liters of growing medium.
Coco coir based substrates/growing mediums are a very popular choice for growing microgreensat home, as it is a soft and airy medium with great moisture retention. Because the microgreen growing cycle is so short, with the seedling relying mostly on nutrients stored inside the seed itself, adding any supplements or additional nutrients to your substrate is not a necessity at all, although a lot of people do add a little bit of worm castings to their mixes, claiming better results.
Once you have added your substrate into the 30mm Microgreen Tray With Holes, water or mist spray lightly if the substrate is on the dry side and tamp the substrate down very lightly by hand, to get it to settle and flatten out nicely. Then gently sprinkle your seeds across the surface. Once this is done, a VERY thin layer of additional substrate may be sprinkled over the top of the seeds (using a baking sieve, for example)
Place the trays into a suitable environment for germination and mist or spray the top of the substrate regularly to prevent it from drying out. (A propagation dome will help keep substrate moist until your seeds have germinated, saving you a lot of effort. Remove the ). Do not overspray, as this will cause overly wet “swampy” subsurface conditions! Just keep the substrate slightly moist at all times.
Once your seeds have sprouted and grown to a harvestable size, you are able to clip off the delicious micro-leaves for your dishes and salads with a pair of pruning scissors.
30mm Microgreen Tray Mesh Bottom trays can also be used for other home and hobby purposes, like sifting out Mealworm Beetles if you are breedingthem, or to sift grains, seeds, Perlite, etc.
The 50mm Microgreen Tray Without Holes has no drainage holes and is 275mm wide and 535mm long.
With its 50mm height, it can be filled to the brim using only about 7.5 liters of growing medium.
Coco coir based substrates/growing mediums are a very popular choice for growing microgreensat home, as it is a soft and airy medium with great moisture retention. Because the microgreen growing cycle is so short, with the seedling relying mostly on nutrients stored inside the seed itself, adding any supplements or additional nutrients to your substrate is not a necessity at all, although a lot of people do add a little bit of worm castings to their mixes, claiming better results.
Once you have added your substrate into the tray, water or mist spray lightly if the substrate is on the dry side and tamp the substrate down very lightly by hand, to get it to settle and flatten out nicely. Then gently sprinkle your seeds across the surface. Once this is done, a VERY thin layer of additional substrate may be sprinkled over the top of the seeds (using a baking sieve, for example)
Place the trays into a suitable environment for germination and mist or spray the top of the substrate regularly to prevent it from drying out. (A propagation dome will help keep substrate moist until your seeds have germinated, saving you a lot of effort. Remove the ). Do not overspray, as this will cause overly wet “swampy” subsurface conditions! Just keep the substrate slightly moist at all times.
Once your seeds have sprouted and grown to a harvestable size, you are able to clip off the delicious micro-leaves for your dishes and salads with a pair of pruning scissors.
The 50mm Microgreen Tray Without Holes can also be used as a drip tray for potted plants, which will catch runoff during watering or flushing.
The Clone Dome Light Frame is another great addition to the Pot Scrog’s arsenal of simple and effective solutions to growers’ everyday problems.
The light frame was designed to work with 85W Fluorescent CFL lamps that have an E27 fitting, but other E27 lamps and bulbs can be used as well, as long as they can be plugged directly into a regular power outlet and have the right intensity and spectrum to germinate or root cuttings under. ( An E27light fitting has a screw-in thread with a 27mm diameter )
Learn more about the art of cloning and plant propagation HERE.
The base of the Clone Dome Light Frame has also been designed to be large enough to accommodate various sizes of plant propagators and can even house a Garland XL High Dome Propagator, as can be seen in the picture below…
Any propagator or humidity dome with base dimensions of up to 44cm x 64cm can sit inside the base of this unit.
The height of the center of the E27 light fitting is approx. 44 cm above the surface on which the light frame rests on, which means that the unit will easily accommodate various types of high dome propagators.
The light frame comes with a 1m long electrical cord and standard 3-point South African plug.
Low cost, slim-line and ultra light, these can easily be installed over propagators or inside a propagation tent. They can also be hung vertically to be used as supplemental lighting for dark tent corners and in between plantings.
Each Double T8 LED Fitting is 615mm long and fits 2 x T8 LED tubes. PLEASE NOTE: These fittings are not the same as older fluorescent fittings (which have ballasts and starters) and should not be used for fluorescent tubes!
Each Clear T8 LED Tube is 600mm long, has a 9 Watt power draw, 6500K colour temperature, and Lumen output of 810 Lumens. PLEASE NOTE: These tubes are not the same as older fluorescent tubes and should not be used in fluorescent fittings!
For best results 4 to 6 T8 tubes are recommended above a single large sized propagator, like the Garland XL High Dome Propagator.
The LED tubes produce hardly any heat and can be hung as close to the cuttings or seedlings as possible to maximize the light intensity.
T8 LED Tubes and Fittings 60cm Assembly:
Always wire up and use correctly.
Never put strain on the connected electrical wire. Do not hang from electrical wire.
PLEASE NOTE: The holes of the hanging eyelets ( that are folded up, out of the casing, if needed, one on each side ) are too small to clip into standard rope ratchet clips. Use something like a round key-holder ring to go into the hanging eyelets and then clip the key ring into the rope ratchet clips if needed.
Take care when handling these units as they are light-duty items and can easily damage if dropped by accident.
The 30mm Microgreen Tray With Holes (drainage slots, to be precise) and is 275mm wide and 535mm long. The drainage provided will help prevent overly wet substrates and potential rot.
With its low 30mm height, it can be filled to the brim using only about 4.5 liters of growing medium.
Coco coir based substrates/growing mediums are a very popular choice for growing microgreensat home, as it is a soft and airy medium with great moisture retention. Because the microgreen growing cycle is so short, with the seedling relying mostly on nutrients stored inside the seed itself, adding any supplements or additional nutrients to your substrate is not a necessity at all, although a lot of people do add a little bit of worm castings to their mixes, claiming better results.
Once you have added your substrate into the 30mm Microgreen Tray With Holes, water or mist spray lightly if the substrate is on the dry side and tamp the substrate down very lightly by hand, to get it to settle and flatten out nicely. Then gently sprinkle your seeds across the surface. Once this is done, a VERY thin layer of additional substrate may be sprinkled over the top of the seeds (using a baking sieve, for example)
Place the trays into a suitable environment for germination and mist or spray the top of the substrate regularly to prevent it from drying out. (A propagation dome will help keep substrate moist until your seeds have germinated, saving you a lot of effort. Remove the ). Do not overspray, as this will cause overly wet “swampy” subsurface conditions! Just keep the substrate slightly moist at all times.
Once your seeds have sprouted and grown to a harvestable size, you are able to clip off the delicious micro-leaves for your dishes and salads with a pair of pruning scissors.
The 30mm Microgreen Tray Without Holes is 275mm wide and 535mm long.
With its low 30mm height, it can be filled to the brim using only about 4.5 liters of growing medium.
Coco coir based substrates/growing mediums are a very popular choice for growing microgreensat home, as it is a soft and airy medium with great moisture retention. Because the microgreen growing cycle is so short, with the seedling relying mostly on nutrients stored inside the seed itself, adding any supplements or additional nutrients to your substrate is not a necessity at all, although a lot of people do add a little bit of worm castings to their mixes, claiming better results.
Once you have added your substrate into the tray, water or mist spray lightly if the substrate is on the dry side and tamp the substrate down very lightly by hand, to get it to settle and flatten out nicely. Then gently sprinkle your seeds across the surface. Once this is done, a VERY thin layer of additional substrate may be sprinkled over the top of the seeds (using a baking sieve, for example)
Place the trays into a suitable environment for germination and mist or spray the top of the substrate regularly to prevent it from drying out. (A propagation dome will help keep substrate moist until your seeds have germinated, saving you a lot of effort. Remove the ). Do not overspray, as this will cause overly wet “swampy” subsurface conditions! Just keep the substrate slightly moist at all times.
Once your seeds have sprouted and grown to a harvestable size, you are able to clip off the delicious micro-leaves for your dishes and salads with a pair of pruning scissors.
The 30mm Microgreen Tray Without Holes can also be used as a drip tray for potted plants, which will catch runoff during watering or flushing.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy policyOk
