Lumii Cooltube Reflector

Lumii Cooltube Reflector

Lumii Cooltube Reflector is an air-tight, fully sealed clear glass tube with a lamp mounting bracket in its center. Lumii Cooltube Reflector is perfect for removing the excess heat generated by HID grow lights without leaking unwanted odors.

Cooltubes were one of the first air cooled reflectors to become available and all these years later they are still a firm favorite with many growers. Effectively a 150mm inline glass tube allows you to blow or extract air through the reflector and over your lamp, thus taking the heat away before it can raise the temperature in your grow room. An additional clip on the reflector is also supplied with the Aerotube which improves your spread of light and reduces any light wastage.

Multiple Aerotubes can be mounted in series along the same length of 150mm Flexible Aluminium Ducting.

Suitable for 250w, 400w and 600w HID lamps

Size: 150mm or 6″ Flange

Length: 50cm

How the LUMii Aerotube Reflector Works:

Cooltube reflectors have long been a favourite of growers, and for good reason: they reduce the risk of heat damage caused by high intensity discharge lighting. This reflector is beneficial in keeping your temperature at a constant level, and stops extreme heat from destroying all your hard work. They remove 90% of the heat from your chosen lamp and increase maximum rated lumen delivery.

The Aerotube reflector is air-tight, with a fully sealed glass tube for your lamp to be mounted in. The external 2-part reflector is clipped on to the top of the cool tube, and is easily assembled.

How to Use the LUMii Aerotube Reflector:

The LUMii Aerotube Reflector comes with detailed instructions within the packaging that will show you how to effectively assemble the reflector. It should be used alongside an inline fan and flexible aluminium ducting (sold separately), to allow air to flow through the tube.

It must be positioned at least 25cm above your canopy in order for it to achieve its optimal results and stop heat scorching. The extra heat is sucked up before it has a chance to affect the temperature of your grow room, and the glass tube allows you to extract air over your lamp.

Cooltube Reflector

Cooltube Reflector

The Cooltube Reflector is an air-tight, fully sealed clear glass tube with a lamp mounting bracket in its center on the one end. Cooltube Reflectors are perfect for removing the excess heat generated by HPS or Metal Halide grow lights.

New Cooltube Wing Design

PLEASE NOTE: NEW Cooltubes now have detachable side wings instead of being permanently attached on hinges that flip the wings up or down. (See photos on the left)

Cooltubes were one of the first air cooled reflectors to become available and all these years later they are still a firm favorite with many growers. They are effectively an inline glass tube that allows you to extract air through the reflector and over your lamp, taking the heat away before it can raise the temperature of your grow room. (Instructional video here)

Cooltubes can be mounted in series along the same length of flexible aluminium ducting.

The Cooltubes have a rounded internal reflector (inside the glass tube), as well as foldable outside reflector wings, for a slightly tighter light spread. They have a mounting hook on each side, to suspend from rope ratchets, come with a 4.5 m long male kettle plug power cord and can be used with up to 1000 Watt bulbs. The hood is fitted with a ceramic E40 light fitting.

Length of 6″ tube (150 mm diameter), end to end: 62 cm

Width of 6″ cooltube when reflector wings are folded out (tip to tip): 28 cm

Length of 8″ tube (200 mm diameter), end to end: 72 cm

Width of 8″ cooltube when reflector wings are folded out (tip to tip): 35 cm

Air Cooled Hood Reflector

Air Cooled Hood Reflector

The Air Cooled Hood Reflector allows for better heat management for your  HPS / MH grow light setup.

The reflector has a sheet metal construction and features 2 x 150 mm ducting ports allowing you to connect extraction fans and ducting to the light fixture to better manage heat emission from your bulbs, by directly blowing the heated air out of your space through the connected ducting. (Instructional video here)

The Air Cooled Hood Reflector has a removable glass cover and reflector for easy cleaning and maintenance. The reflector is fitted with a 4.5 meter power cord with a male kettle plug and features a ceramic E40 light fitting. It also comes with a set of hanging clips, so that the fixture can be attached to a set of adjustable rope ratchets.

 

Budget Birdwing Reflector

Budget Birdwing Reflector

Budget Birdwing Reflector – maximize your lighting output by beaming down all your light right onto your lovely indoor plantings.

Please note: The latest stock arrivals have a slight different build ( photos have been updated )

This reflector is fitted with an E40 lamp holder and male kettle plug fitting which can be used in combination with any suitable ballast and lamp combination. The reflector can be clipped into a set of rope ratchets, to enable easy up and down adjustment of your light.

The reflective metal sheet measures 46cm along the spine of the birdwing, with a width of around 40cm from wing tip to wing tip when already slightly curved inwards. ( 47cm when completely flat )

This reflector is able accommodate lamps of up a 5cm radius, which is adequate for most HPS and MH lamps.

The Budget Birdwing Reflector cord length is 4.5m

 

Lumii Black Reflector

Lumii Black Reflector

The Lumii Black Reflector is a budget reflector, made to the highest standard, very popular with beginners and commercial growers.

Alternative reflectors -> HERE

 

Revised Dutch barn design utilising a V-groove directly above the lamp to help eliminate hotspots.

The  Lumii Black Reflector has a dimpled aluminium finish for even light distribution, revised reflective angles, curved corners for safety and a parabolic fold above the lamp for a more even spread of light. It’s open ended design also makes it suitable for low mounting heights. There really is no cheaper way of getting this much valuable light to your plants.

Features an E40 ceramic lamp holder and 4m of kettle-plugged cord and is pre-assembled.

Comes covered in plastic to prevent scratches on reflector. Please remove protective plastic before use.

Ideal for 250w, 400w and 600w HID lamps. Ballast is required to fire HID Lamps.

Can also use E40 CFL’s. No ballast required for CFL’s to fire lamp.

Size: 47cm x 47cm

Rope Ratchets

Rope Ratchets

Various Garden HighPro ROPE RATCHETS are available, click below:

Prohanger range

 

 

These  rope ratchets are sold in pairs.
Holds reflectors, carbon filters, light fixtures, and ventilation equipment.
Extremely useful when adjusting heights of reflectors. These handy units will definitely save you time and hassle.
Suited for any size reflectors, including large reflectors.

Rope ratchet hangers are the simple and secure way to hang items in your grow room or grow tent.

The hangers are supplied with hook fixings on either end to ensure quick and simple installation in a grow tent. If you are using a room to grow instead of a grow tent, then install a few ceiling fixings to hook the rope ratchet hangers on to, hook the other end to your growing equipment, and that’s it; your fan, filter, grow light, or whatever else you may be hanging will be secure and supported.

Rope ratchet hangers allow you to move your growing equipment with ease and offer much more support than other hanging equipment like easy-rolls, and if you are planning on using heavier growing equipment such as large reflectors or carbon filters, then we highly recommend them.

 

Lumii Black 600w Electronic Kit

Lumii Black 600w Electronic Kit

The Lumii Black 600w Electronic Kit is supplied with the Lumii BLACK 600w Electronic Ballast, Lumii Black 600w Dual Spectrum lamp and the Lumii Black reflector.

The ballast features both a dim and a boost functions enabling you to control the light output from your lamp to your plants. It can be dimmed down to both 250w and 400w and also has a ‘super-lumens’ boost option (600w+Boost) which is on average a 10% increase in output.

This Lumii Black Lamp is a 600w Dual Spectrum HPS Lamp. It is an essential for stimulating enhanced flowering as it gives out 88,000 Lumens and lasts for up to 18,000 hours.

A Dutch Barn-Styled, Euro Reflector the LUMii Black Reflector does exactly what it should. Complete with lamp holder, mounting holes to attach rope ratchets to,  and a 4m length of kettle-plug cord.

We recommend using a 600w lamp for 600w dimmer settings, a 400w lamp for 400w dimmer settings and a 250w lamp for 250w dimmer settings.

Never boost a lower wattage lamp to a higher lamp setting.

Lumii Black 600w Magnetic Kit

Lumii Black 600w Magnetic Kit

The Lumii Black 600w Magnetic Kit is supplied with the Lumii BLACK 600w Magnetic Ballast, Lumii Black 600w Dual Spectrum lamp and the Lumii Black reflector.

The LUMii Black Magnetic Ballast 600W is a trusted favourite for many growers simply because they have no complicated circuitry inside and very rarely fail. It delivers a constant 600w of pure power to your lamp. Just connect it together and you’re good to go! No fuss necessary!

This Lumii Black Lamp is a 600w Dual Spectrum HPS Lamp. It is an essential for stimulating enhanced flowering as it gives out 88,000 Lumens and lasts for up to 18,000 hours.

A Dutch Barn-Styled, Euro Reflector the LUMii Black Reflector does exactly what it should. Complete with lamp holder, mounting holes to attach rope ratchets to,  and a 4m length of kettle-plug cord.

Clamps

Clamps

Clamps are a  simple solution for connecting ducting to Inline Fans, Carbon Filter, Ducting Splitters or Air Cooled Reflectors. Fitted with a worm screw, tighten with a screw driver in a few seconds.  Clamps provide a secure connection, ensuring your extraction system remains securely connected.

The Clamps are made from strong, Stainless Steel  They are super easy to install and will last you for many grows to come. To install a clamp, you simple screw it open wide enough to fit over the end of your ducting, slip your ducting over the Fan/Reflector/Carbon Filter’s flange and screw it closed to ensure your ducting is fastened on tightly.

Available in a few different sizes to suit all ducting sizes. They are an efficient, cost effective method of joining ventilation equipment.

Clamp Sizes:

14-32mm (for larger water pumps)            95-121mm              108-133mm             133-159mm
197-222mm            241-267mm           286-311mm

PLEASE NOTE: 14-32mm Clamps are Stainless Steel, for use under water.

315mm clamping info

Clamps are an adjustable steel band that the user tightens with a screw. Most people generally know this kind of fitting as a Jubilee Clip which is often in the plumbers tool box. The premise is the same just on a bigger scale to suit ducting, not water pipes. The worm gear that adjusts the tightness allows a secure connection between ducting and fan or filter.

Many growers use ducting clamps in combination with Aluminium tape. This makes an even stronger join with advantages of both. The tape has a bigger surface area for joining and can go round and round as many times as you want. It can degrade after a while though so the Ducting Clamp will increase holding power of the join.

Fluorescent CFL – 6400k

Fluorescent CFL - 6400k

The light produced by Fluorescent CFL – 6400k Grow Lights tends to be softer and less damaging to tender young plants. For this reason, the fluorescent grow light is popular for seedlings and cuttings, an excellent way to establish young plants. The Fluorescent CFL – 6400k are especially good for shelf gardening because their low heat allows you to place lights on shelves that are stacked on top of each other. Smaller plants and seedlings can thrive in a well-designed indoor garden lit with fluorescent grow lights.

6500k is used for germinating, seedlings, cuttings and Veg Stage.

When plants are young, high pressure lighting can be too intense, causing them stress and negatively affecting growth. Instead, cuttings and seedlings can be placed under fluorescent lighting until they are ready to move on into the vegetative stage.

Compact fluorescent (CFL) lamps provide a more intense light for small spaces by effectively coiling several long tubes into a compact form.

During propagation, lights should be kept on for 18 hours a day, although many growers find that quicker growth is achieved by keeping them on constantly, without a night period at all.

Because of their low running temperature they are ideal for growing in small spaces and their low power usage keeps costs low for the small scale grower. They are an excellent option during the vegetative stage because they can be placed much closer to the plant’s foliage, which tends to encourage the plant to remain short and bushy; favorable characteristics to look for when growing indoors.

Fittings:

E27 is a standard household fitting.

E40 is larger than your standard house fitting.

E40 lamps fit the Lumii Black Reflector. ( Although the reflector comes with kettle plug cords, not 3-point plug cords, as it is mostly used with ballasts for high intensity plant lighting)

85W FLASH CFL E27    – 6400k – Daylight – Veg Stage

Base E27
Shape Spiral
Wattage 85W
Voltage 230V
Lumens 4750lm
Dimmable No
Colour Daylight
Colour in Kelvin 6400K
Lifetime 8000 hours
Max Length 260mm
Diameter 82mm

85W FLASH CFL E40   – 6400k – Daylight – Veg Stage

Base E40
Shape Spiral
Wattage 85W
Voltage 230V
Lumens 4750lm
Dimmable No
Colour Daylight
Colour in Kelvin 6400K
Lifetime 8000 hours
Max Length 260mm
Diameter 82mm

140W FLASH CFL    – 6400k – Daylight – Veg Stage

Base E40
Shape Spiral
Wattage 140W
Voltage 230V
Lumens 7850lm
Dimmable No
Colour Daylight
Colour in Kelvin 6400K
Lifetime 8000 hours
Max Length 320mm
Diameter 120mm

200W EnviroGro CFL    – 6400k – Cool White – Veg Stage

Base E40
Wattage 200W
Voltage 230V
Lumens 8050lm
Dimmable No
Colour Cool White
Colour in Kelvin 6400K
Lifetime 10000 hours
Max Length 225mm
Diameter 170mm

300W EnviroGro CFL    – 6400k – Cool White – Veg Stage

Base E40
Wattage 300W
Voltage 230V
Lumens 12950lm
Dimmable No
Colour Cool White
Colour in Kelvin 6400K
Lifetime 10000 hours
Max Length 225mm
Diameter 170mm

LUMii Black Magnetic Ballast 600W

LUMii Black Magnetic Ballast 600W

LUMii Black Magnetic Ballast 600W is designed to give you a consistent light supply for your plants.

The LUMii Black Magnetic Ballast 600W is a trusted favourite for many growers simply because they have no complicated circuitry inside and very rarely fail. It delivers a constant 600w of pure power to your lamp. Just connect it together and you’re good to go! No fuss necessary!

The well vented metal-case ensures the ballast runs cool and quiet and features wall-hanging brackets making them fully wall-mountable, thus making more space in your grow room.

Supplied as a standalone ballast with flying IEC lead enabling you to add any reflector fitted with a universal IEC socket. Simply add a reflector and lamp with the same wattage as the ballast to start growing.

This unit has been manufactured to a high quality standards and meets all applicable EC Directives on Safety and EMC Emissions. This design includes a timed ignition circuit that helps protect the unit from overload when lamps fail.

Start Up and running currents of LUMii Black Metal Magnetic ballast 600W

Start up Current : 4.5 amps

Running Current : 2.9 amps

For the best growing results, remember to always change lamps after maximum 9 months of use.

The LUMii Black Magnetic Ballast 600W can be used with any 600w HID lamp.

Garden HighPro LumaxPro HPS Lamps

Garden HighPro LumaxPro HPS Lamps

Garden HighPro LumaxPro HPS Lamps feature an optimized spectrum for photosynthesis. For use with magnetic and digital/electronic ballasts and any type of reflector or cooling hood with an E40 lamp holder.

Garden HighPro LumaxPro HPS Lamps Specs

LumaxPro 600W Spectrum

LumaxPro 400W Spectrum

LumaxPro 250W Spectrum

Proper lighting is a key ingredient in promoting robust, healthy growth as well as meeting the needs of various plant growth phases through optimized spectral outputs. Specifically tailored for the hydroponic and horticultural industries.

HIGH PRESSURE SODIUM – (HPS)

HPS bulbs are the most efficient bulbs that are commonly used by the hobby gardener. They are high in the red and yellow parts of the spectrum and low in the blue, this imitates the fall sun. Because of this spectrum some plants that are grown with HPS lights only can grow elongated and rather leggy, while many other plants are not effected by the light spectrum. For plants that normally bud and flower in the fall this is usually the light of choice because the light spectrum promotes flower production.

HPS bulbs are made out of a translucent ceramic arc tube containing a mixture of sodium, mercury and xenon gas. This arc tube is suspended in a outer glass shield (bulb). HPS bulbs range in power from 35w to 1000w, with the 250w, 400w, 600w and 1000w being the most popular for indoor horticulture.

HPS bulbs should be changed out after about 24 months. The bulbs slowly lose their brightness over time and to maintain good light quality the bulbs must be changed before the end of their rated life.

Garden HighPro LumaxPro HPS Lamps offer a great light spectrum at an affordable price!

 

Garden HighPro MediPro

Garden HighPro MediPro

The Garden HighPro MediPro Plant Guardian is here to save your plant tops from the intense heat emitted by hot HPS lamps!

The Medipro marks off the required distance between your plants and lamp, with each stick in the modular system measuring 10cm (with 5 sticks in the set). Fit the heat resistant clip over the E40 light fitting of your reflector, with the right number of measuring sticks screwed onto it. Now you will reduce the risk of having your light fixture too close to your plants. A mini thermo hygrometer is also included and can be attached at the other end of the Garden HighPro MediPro to indicate temperature and humidity in the area of the leaf-tops.