Autopot FlexiTank

Autopot FlexiTank

The Autopot FlexiTank revolutionizes water storage, it is everything you need in one compact box. It requires no tools for assembly, reduces storage and shipping costs and takes minutes to assemble. It really couldn’t be simpler. Unlike other water-butts and barrels, it can be stored away when not used, can fit where other tanks cannot go and is adaptable in ways standard tanks are not. Ideal for Autopot and also other customized systems.

25L FlexiTank

  • When full of water: 30cm Diameter x 37cm High

50L FlexiTank

  • When full of water: 35cm Diameter x 53cm High

100L FlexiTank

  • When full of water: 43cm Diameter x 75cm High

225L FlexiTank

  • When full of water: 63.5cm Diameter x 81cm High

400L FlexiTank

  • When full of water: 68cm Diameter x 111cm High

750L FlexiTank

  • When full of water: 90cm Diameter x 120cm high

1000L FlexiTank

  • When full of water: 120cm Diameter x 90cm high

 

Contents:
– Support Poles (Various – according to size)
– 1x Water Tank
– 1x FlexiTank Tap.

Larger Flexitanks have 2 additional fittings, as well as the FlexiTank tap, which are installed in the provided holes just below the zipper lid on the tank’s back side (as below) These can be used for automated tank top ups, etc.

Flexitank Fittings

Autopot FlexiTank Instructions

 

Autopot FlexiTank Tap

Autopot FlexiTank Tap

An Autopot FlexiTank Tap comes in handy when you are planning or building an Autopot system and would like use a Click Fit Tank Adapter/Filter to run a trunk feeding line to multiple Autopot sets. These taps also serve to replace old, worn-out FlexiTank Taps.

The tap fits through the ready-made holes in both the FlexiTank and FlexiTank Pro ranges and includes 2 rubber washer seals that are hand-tightened to each side of the reservoir with the provided plastic nut. The tap can also be installed into any other suitable water reservoir through which the correct sized hole (26mm) can drilled to fit the tap. Hard plastic industrial drums are often use as water reservoirs when building hydroponic systems. When considering such a container, make sure that the plastic will not let sunlight through its walls. If sunlight penetrates into the nutrient solution, algae will start growing inside of it, causing nutrient depletion and Oxygen loss in the solution.

The outlet side of the Autopot FlexiTank Tap is threaded and fitted with a 26.5mm click connector, to which a Click Fit Tank Adapter/Filter can be fitted. Autopot piping (16mm) or irrigation piping (12mm) can then be connected to feed the Autopots in the system.

AutoPot FlexiTank Pro

FlexiTank Pro

The AutoPot FlexiTank Pro is yet another advance in our program to bring AutoPot Watering Systems to every kind of growing environment. A reflective, light-tight skin makes the FlexiTank Pro the perfect solution in bright, high temperature situations. Further enhancements come in the shape of internal capacity markings and an ultra-strong, anti-tip, fully collapsible design.

The FlexiTank Pro’s reflective and light-tight skin beautifully disguises an extremely rugged, fully collapsible design within. Concealed tank supports and internal capacity markings add neat edges to the proven, ultra-strong, ultra-practical AutoPot FlexiTank Pro design.

Utilizes the same accessories and fittings for easy integration with existing AutoPot Watering Systems.

100L Pro

  • Capacity: 100 ltr
  • When full of water: 48.5cm Diameter x 70cm High

225L Pro

  • Capacity: 225 ltr
  • When full of water: 58.5cm Diameter x 85cm High

400L  Pro

  • Capacity: 400 ltr
  • When full of water: 73.5cm Diameter x 105cm High

Flexitank Pro Instructions

 

Auto3 with Plastic Pots OLD VERSION

Auto3 with Plastic Pots OLD VERSION

The Autopot Auto3 with Plastic Pots OLD VERSION Tray System allows you to irrigate three pots in single tray and lid assembly that measures just 114.5cm x 38.5cm. All fed by a single AQUAvalve.

To be used with older Systems (Blue OR Black Aquavalve) using 5mm and 12-5mm fittings.

Footprint is reduced. Fewer lights are needed for more tightly arranged plants. Vertical racking becomes a viable option thanks to reduced maintenance.

Cultivating with Auto3 benefits growers in three key areas:

Growing Space

  • Maximizes the available area
  • Ideal for moveable racks and rolling tables

Overheads

  • Draws no more water than 3 single XL trays
  • Reduction in components = reduced maintenance duties

Plant Health

  • Unlike a large, single, flat tray the molded base minimizes standing water
  • Lid blocks light and debris from entering the tray

Auto3 XL OLD VERSION Hard Plastic Pots includes:

  • 1x Auto3 XL tray
  • 1x Auto3 XL lid
  • 1x Round blue access cover
  • 1x AQUAvalve ( Old version, with 3mm inlet )
  • 1x AQUAvalve cover
  • 1x 6mm top hat grommet
  • 1m length of 6mm piping
  • 3x 25L Hard Plastic Pot
  • 3x PotSock (round)

Minimum Reservoir Requirements

  • 1x system – FlexiTank 50ltr
  • 2x systems – FlexiTank / FlexiTank Pro 100ltr
  • 4x systems– FlexiTank / FlexiTank Pro 225ltr
  • 8x systems – FlexiTank / FlexiTank Pro 400ltr
  • 10x systems – FlexiTank 750ltr

Instructions

16Pot System AQUAValve5 with 15L Pots

16Pot-System-AQUAValve5-with-15L-Pots

The Autopot 16Pot System AQUAValve5 with 15L Pots is extremely versatile and can be used for a wide range of plant types and sizes. Seasonal flowering plants and perennial shrubs thrive and produce an abundance of blooms and foliage because of the unique action of the AQUAvalve, which is designed to allow the plant to go through a wet & dry cycle.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The system is easily extended so many pots can be linked to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and a tank is filled with water & liquid feed this extremely versatile system will completely take care of all your plants needs.

The Autopot automated system works via a gravity fed feeding system that is easy to install and maintain without wasting a single drop of water.

A wide range of growing substrates can be used with the Autopot system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated, Autopot system allows gardeners to relaxand even go away on holiday and still be assured of healthy plants and bumper harvests.

Autopot 16Pot System AQUAValve5 with 15L Pots includes:

1 x 225 ltr FlexiTank

1 x 12mm Click-fit tank adaptor & filter
1 x 8 meter Length of 12mm pipe
2 x 12mm In-line tap
4 x 12mm In-line tap adaptor
1 x 12mm Tee Piece
2 x 12mm Elbow
16 x 1 Pot Trays & lids
16 x 15ltr Pots
16 x Autopot 1 Pot accessory packs with AQUAVALVE 5. (Incl. 16 Marix, 16 Root control disks, 16 x 1 Meters of 9mm Autopot piping, 16 Cross Connector 12mm to 9mm & 16 T Connector 12mm to 9mm)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.

16Pot System Instructions