Inline Tap
R20.00 – R60.00
Take control of your flow — and flush your lines in minutes. Inline Taps (also called chokes or ball valves) let you turn off the water supply or flush the system, and fine-tune flow rate to suit each part of your setup.
- Flush with ease: open the tap to clear sediment or lime-scale build-up in a couple of minutes, every couple of weeks
- Dial in flow: restrict volume for systems like NFT that need 1–2 litres per minute per channel
- Seasonal flexibility: adjust water to plants that need different amounts at different times of year
- Sized for your system: 5mm choke for fewer than 4 units; 12/15/20mm ball valves for larger layouts; 9mm now available for Aquavalve 5
12mm/15mm taps need 12mm or 15mm Inline Tap Adaptors; 20mm taps need 20mm adaptors. Note: these are chokes and may not shut off completely. Product may vary from picture.
Description

Inline Taps are useful when wanting to turn off water supply or to flush system.
5mm Inline Tap useful when less than 4 Units to turn off water supply. Also known as a Choke.
Please note: product may vary from picture.
9mm In-Line Taps for use with Autopot Aquavalve 5‘s 9mm piping are now available.

Inline taps or ball valves are a very useful accessory for the Autopot when having 4 for more Autopot units. They can be added to the end of a layout when you are using pipe You can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.
You will also need to purchase Inline Tap Adaptors (12mm or 15mm) for the 12mm/15mm Tap and Inline Tap Adaptors (20mm) for the 20mm Tap.
It is important to note that these are chokes and may not necessarily shut off completely.












