Garden HighPro ProTube Air Cooled Tube Reflector – for 150mm ducting
Pearl Technology stamped aluminum.
Prime European PVD coated aluminum
Light bulb adapter E-40
Secure wire connection box
Adapted for 250W - 600W HPS bulbs
Glass Tube Length = 40cm
Total Length = 62cm
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables
Air Cooled Tube Reflectors (cooltubes) are used in conjunction with inline extraction fans and ventilation ducting to remove heat generated by HPS lamps from a grow area – this can lower the temperate of the space by up to 5 degrees Celsius.
Don’t forget to add a pair of Garden HighPro Prohangers to your cart to hang your Garden HighPro ProTube Air Cooled Tube Reflector with!
Garden HighPro MaxLight Air Cooled Hood Reflector – for 150mm ducting
Pearl Technology stamped aluminum inner, matte black plastic outer casing
Hinged glass for easy cleaning and lamp replacement
Adapted for 250W – 600W HPS bulbs
61cm (L) x 48cm (W) x 22cm (H)
Cable length: 3.8m, with male kettle plug fitting suitable for ballasts with female kettle plug power output supply cables
Air Cooled Hood Reflectors are used in conjunction with inline extraction fans and ventilation ducting to remove heat generated by HPS lamps from a grow area – this can lower the temperate of the space by up to 5 degrees Celsius.
Removes 20.13 L of moisture per day at 30° C and 80% RH (Relative Humidity) using 342 Watts/hour
Removes 13.37 L of moisture per day at 30° C and 60% RH using 309 Watts/hour
Removes 11.5 L of moisture per day at 27° C and 60% RH ( These conditions are the closest to an average grow space )
Removes 7.86 L of moisture per day at 20° C and 60% RH using 244 Watts/hour
Minimum operating space requirement is 4m²
The MeacoDry ABC Range 20L Compressor Dehumidifier also has the following features:
Air Flow (nominal): 145m³/hour
Rated Current: 1.55 A
2 Fan speeds
Automatic defrost, Automatic turn off
Ultra-Quiet – Noise level at one meter: Max. 44 dB
Energy Efficient
Top Quality – Two-year warranty
Multiple Features – Child lock, Laundry Mode & Timer
5 L water tank with option of continuous drainage (hose excluded)
Compact Design – Small and lightweight
Dimensions (HWD): 540 x 335 x 285 mm
Weight: 15.2 kg
Generally, manufacturers name and rate the unit based on the amount of water it can remove from air in 24 hours, but based on air with a temperature of around 30 degrees Celsius and with an RH of 80%. These types of conditions may be a reality in really tropical summers in places like China and Hong Kong, but is far from what the conditions inside your average grow area are like. There are even some manufacturers that rate their units’ performance based on 32 degree Celsius air with 95% RH! These ratings are also based on air where the RH remains the same – as a dehumidifier cannot magically continue to remove water from air with little to no water in it.
As a general rule of thumb, halve the rating of any dehumidifier to get an idea of how much water it will remove from a “normal” grow room environment in 24 hours.
Dehumidifiers are best suited for closed-loop growing set-ups, or spaces with little ventilation– no number of dehumidifiers will dry out a space where potentially wet air is constantly being ventilated into the space from outside.
Removes 10.26 L of moisture per day at 30° C and 80% RH (Relative Humidity) using 195 Watts/hour
Removes 8.38 L of moisture per day at 25° C and 80% RH using 174 Watts/hour
Removes 5.02 L of moisture per day at 25° C and 60% RH using 165 Watts/hour ( These conditions are the closest to an average grow space )
Minimum operating space requirement is 4m²
The MeacoDry ABC Range 10L Compressor Dehumidifier also has the following features:
Air Flow (nominal): 105 m³/hour
Rated Current: 1.0 A
2 Fan speeds
Automatic defrost, Automatic turn off
Ultra-Quiet – Noise level at one meter: 35 to 40 dB
Energy Efficient
Top Quality – Two-year warranty
Multiple Features – Child lock, Laundry Mode & Timer
2,6 L water tank with option of continuous drainage (hose excluded)
Compact Design – Small and lightweight
Dimensions (HWD): 463 x 300 x 250 mm
Weight: 11.3 kg
Generally, manufacturers name and rate the unit based on the amount of water it can remove from air in 24 hours, but based on air with a temperature of around 30 degrees Celsius and with an RH of 80%. These types of conditions may be a reality in really tropical summers in places like China and Hong Kong, but is far from what the conditions inside your average grow area are like. There are even some manufacturers that rate their units’ performance based on 32 degree Celsius air with 95% RH! These ratings are also based on air where the RH remains the same – as a dehumidifier cannot magically continue to remove water from air with little to no water in it.
As a general rule of thumb, halve the rating of any dehumidifier to get an idea of how much water it will remove from a “normal” grow room environment in 24 hours.
Dehumidifiers are best suited for closed-loop growing set-ups, or spaces with little ventilation– no number of dehumidifiers will dry out a space where potentially wet air is constantly being ventilated into the space from outside.
The CAN-Lite 425 PL Carbon Filter weighs in at only 2.2 kg, making it easy to hang from rope ratchets. With a length of 60 cm, this little filter can be used in small to medium grow spaces. Filled to the brim with 1.6 kg of activated carbon using vibration plates during manufacture, your air will be filtered to perfection. The removable pre-filter can be hand-rinsed when necessary and the filter is also refillable.
The filter is able to purify up to 425 m3/hr. ( It can be matched up with a fan with a maximum capacity of 467 m3/hr, as there is generally an air-flow loss of around 20% when a filter is added into the extraction setup. )
PLEASE NOTE: The CAN-Lite 425 PL Carbon Filter can be fitted with either a 100mm OR a 125mm Flange ( SOLD SEPARATELY! ) … don’t forget to add a flange to your cart with your purchase !
Carbon Filters will not work in spaces with a Relative Humidity of 85% or higher.
The CAN-Lite 300 PL Carbon Filter weighs in at only 1.8 kg, making it very easy to hang from rope ratchets. With a length of 45 cm, this little filter can be used in smaller grow spaces. Filled to the brim with 1.2 kg of activated carbon using vibration plates during manufacture, your air will be filtered to perfection. The removable pre-filter can be hand-rinsed when necessary and the filter is also refillable.
The filter is able to purify up to 300 m3/hr. ( It can be matched up with a fan with a maximum capacity of 330 m3/hr, as there is generally an air-flow loss of around 20% when a filter is added into the extraction setup. )
PLEASE NOTE: The CAN-Lite 300 PL Carbon Filter can be fitted with either a 100mm OR a 125mm Flange ( SOLD SEPARATELY! ) … don’t forget to add a flange to your cart with your purchase !
Carbon Filters will not work in spaces with a Relative Humidity of 85% or higher.
The Cooltube Reflector is an air-tight, fully sealed clear glass tube with a lamp mounting bracket in its center on the one end. Cooltube Reflectors are perfect for removing the excess heat generated by HPS or Metal Halide grow lights.
PLEASE NOTE: NEW Cooltubes now have detachable side wings instead of being permanently attached on hinges that flip the wings up or down. (See photos on the left)
Cooltubes were one of the first air cooled reflectors to become available and all these years later they are still a firm favorite with many growers. They are effectively an inline glass tube that allows you to extract air through the reflector and over your lamp, taking the heat away before it can raise the temperature of your grow room. (Instructional video here)
Cooltubes can be mounted in series along the same length of flexible aluminium ducting.
The Cooltubes have a rounded internal reflector (inside the glass tube), as well as foldable outside reflector wings, for a slightly tighter light spread. They have a mounting hook on each side, to suspend from rope ratchets, come with a 4.5 m long male kettle plug power cord and can be used with up to 1000 Watt bulbs. The hood is fitted with a ceramic E40 light fitting.
Length of 6″ tube (150 mm diameter), end to end: 62 cm
Width of 6″ cooltube when reflector wings are folded out (tip to tip): 28 cm
Length of 8″ tube (200 mm diameter), end to end: 72 cm
Width of 8″ cooltube when reflector wings are folded out (tip to tip): 35 cm
The unit is versatile and can be used in a number of ways depending on which operating mode you select and how you wire up the unit.
There are 2 simple modes of operation, where the unit will turn equipment on when the humidity drops below a set % ( Humidification mode ) OR the unit will turn equipment on when the humidity rises above a certain % (Dehumidification mode).
For more advanced users, two sets of equipment could be operated with the digital humidity controller. Here, the default circuit ( called Normally ON / Normally CLOSED ) will be used to constantly power equipment, UNTIL such time as the switching conditions are met.
Dry Weather Example: A humidifier will continuously operate UNTIL the RH goes above a certain %, at which point the controller will “flip over” the normally active circuit, powering down the humidifier and turning on the alternate circuit ( connected to, for example an extraction fan ) which will operate until the RH drops to below the set %.
Wet Weather Example: A dehumidifier will continuously operate UNTIL the RH drops below a certain %, at which point the controller will “flip over” the normally active circuit, powering down the dehumidifier and turning on the alternate circuit ( connected to, for example a misting unit ) which will then operate until the RH increases to above the set %.
The unit can be programmed in various other ways, which include the % drop or increase before circuit is switched over, ON time delays ( To prevent damage to equipment ) and it also has an emergency mode feature, where equipment will be turned on for preset amounts of time in case of RH probe errors.
The unit runs off 220V AC, which means no additional AC Adaptors / Drivers are needed to power up the unit itself.
Please note that the controlled equipment will still require their own power sources ( the unit does not provide power to the equipment, it only engages or disengages their circuits ) PLEASE USE RESPONSIBLY – Get a professional to help you if you feel unsure about your wiring.
Unit includes RH probe only, no additional electrical wires or plugs are included.
Wiring Diagrams:
Some units have a 3-wire sensor. If you plan to remove and then replace the sensor from the unit, MAKE NOTE OF WHAT COLOUR WIRE IS INSTALLED INTO WHICH TERMINAL BEFORE REMOVING THE WIRES
Some units have a 4-wire sensor. If you plan to remove and then replace the sensor from the unit, MAKE NOTE OF WHAT COLOUR WIRE IS INSTALLED INTO WHICH TERMINAL BEFORE REMOVING THE WIRES
Technical Specifications:
Model number
DHC-100+ series
Supply voltage
220Vac, 110Vac, 50/60Hz; 12Vac/dc, 24Vac/dc
Humidity measuring range
0%-99%RH
Humidity control range
10%-99%RH
Resolution
1%RH
Humidity accuracy
25℃: ±(5%RH+0.5digit)
10-40℃ 0%-59%RH: ±(6%RH+0.5digit)
10-40℃ 59%-99%RH: ±(8%RH+0.5digit)
Input types
HTG3515CH temperature humidity sensor, length is 2 m (includes the probe)
Sensor Stability
±0.5%RH/year
Output types
One SPDT electromagnetic relay
Relay contact rating
10A at 250VAC, Max.single phase load is 0.5HP/220VAC
Power consumption
Less than 3W
Front panel IP rating
IP54
Insulation resistance
500M ohm min
Withstand voltage
2KV 50Hz for 1min, no breakdown and flashover phenomenon
Vibration resistance
(10-5-10) Hz, 2G, 3min vibration, work normal
Operating temperature
0 to 60 ℃
Operating humidity
20-85% RH max, non-condensing
Storage temperature
-30 to 75 ℃
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy policyOk
