Filter 9mm to be fitted to outlet pipe from reservoir to filter water. Will fit 9mm (O.D.) pipe. For use with Autopot pot sets and system that use the new Aquavalve 5 has a 5mm (I.D.) inlet and uses 9mm (O.D) Autopot piping. For Autopot systems that use the original Aquavalve with its 3mm (I.D.) inlet, use the 5mm (O.D.) Filter and 5mm piping.
AQUAValve5 for systems using 9mm and 12-9mm fittings.
The Filter 9mm should be used with the 30 ltr & 47 ltr tanks. It is simply inserted inside the tank once the 9mm pipe is pushed through the 9mm Top Hat Grommet at the bottom of the tank. It can be easily serviced and will float to the top if it comes detached from the tube, this will not happen if you make sure you have pushed the filter firmly into the tube.
The sponge in side filter is designed to trap any particles that would clog up your system. Simply clean out sponge every 4 weeks.
AutoPot are specialists in self-watering systems, with emphasis being strongly placed on efficiency and preservation. AutoPot delivers products that are considered the most environmentally friendly watering systems in the world to both domestic, hydroponic and commercial markets. Our systems ensure this claim as the plant uses everything that is supplied to it; there is no loss of water, run-off or leakage!
All AutoPot products require NO POWER, PUMPS, MAINS WATER PRESSURE OR TIMERS to operate, GRAVITY PRESSURE IS ALL THAT’S NEEDED from a tank or water barrel.
The systems are undoubtedly some of the simplest to use and can be left unattended for weeks due to the capability of the AQUAvalve to deliver all that is required by the plant. AutoPot is now an international market leader in irrigation and hydroponic systems, with an established global reputation for providing durable, environmentally friendly and innovative watering solutions to a range of growing scenarios.