40W Tricolour 1200mm Batten LED
40W Tricolour 1200mm Batten LED (2)
40W Tricolour 1200mm Batten LED (5)
40W Tricolour 1200mm Batten LED - Image 4
40W Tricolour 1200mm Batten LED (4)

40W Tricolour 1200mm Batten LED

R300.00

Three whites, one light – the budget-friendly batten every grow room can use. Switch between Cool White for clones and seedlings, Warm White for side lighting, or Natural White for everyday work light. Slim, light and efficient, it slips into tight spaces where bigger fixtures won’t fit.

  • Tricolour selectable: 3000K, 4000K or 6500K from one fitting – no need to buy three lights.
  • Bright & efficient: 4400 lumens from just 40W (110lm/W) across a wide 120° beam.
  • Built to last: 25 000-hour rated life with built-in 1kV surge protection.
  • Slim & easy to fit: Only 25mm deep and 263g, with mounting brackets included.

1200 × 76 × 25mm | 40W | 4400lm | 3000K/4000K/6500K | CRI >80 | 180–240V AC | PC housing | IP20 – indoor, dry use only: keep away from water and moisture | 1-year limited warranty

In stock

SKU: LIG331 Category:

Description

40W Tricolour 1200mm Batten LED – 3000K / 4000K / 6500K – One light, three colour temperatures, loads of uses around the grow room. This batten-type LED fixture is a 1.2m ultra-slim LED that switches between Warm White (3000K), Natural White (4000K) and Cool White (6500K). That flexibility makes it a handy, low-cost utility light for growers who want to put the right kind of white light exactly where they need it.

How growers can use it

  • Cloning & propagation (Cool White – 6500K): Cool white light is a popular choice for cuttings, clones and young seedlings. With 4400 lumens spread over a wide 120° beam, a single batten gives even coverage over a propagation tray or shelf.
  • Side lighting (Warm White – 3000K): Mount it vertically along the side of your space to add supplementary light to lower branches and the sides of the canopy that your main light struggles to reach.
  • Work & inspection light (Natural White – 4000K): A neutral, clean white for checking plants, mixing nutrients, or lighting up your grow room, shed or workbench.
  • Underlighting – only with care: Some growers use battens beneath the canopy. This fitting is rated IP20 and is NOT water- or moisture-resistant, so only consider this in conditions where it is fully protected from water, drips, run-off, spraying and splashes. See the safety notice below.

40W Tricolour 1200mm Batten LED Features

  • Tricolour selectable: Choose 3000K, 4000K or 6500K from one fitting – no need to stock three different lights.
  • Efficient output: 40W delivering 4400 lumens at 110lm/W, with a power factor above 0.9.
  • Wide, even spread: 120° beam angle from high-quality SMD 2835 LED chips, CRI >80.
  • Ultra-slim & lightweight: Just 25mm deep and 263g, with a durable single-piece, extruded PC (polycarbonate) housing – easy to fit in tight spaces. (Front facing light-diffuser is part of the extrusion and cannot be removed)
  • Long life: Rated for 25 000 hours.
  • Built-in protection: 1kV surge protection helps guard against power spikes.
  • Cable Connect wiring: Comes with electrical cord for faster installation. (Always wire up responsibly)

40W Tricolour 1200mm Batten LED Specifications

  • Power: 40W
  • Lumen output: 4400lm (110lm/W)
  • Colour temperature: 3000K / 4000K / 6500K (Tricolour)
  • LED type: SMD 2835
  • CRI: >80
  • Beam angle: 120°
  • Voltage: 180–240V AC
  • Power factor: >0.9
  • Surge protection: 1kV
  • Rated life: 25 000 hours
  • IP rating: IP20 – indoor, dry locations only
  • Housing: PC (polycarbonate)
  • Dimensions: 1200 × 76 × 25mm
  • Weight: 263g
  • Connection: Cable Connect
  • In the box: Mounting brackets, screws & plugs (Please note these are stuck into one of the two carboard ends of the packaging!)
  • Warranty: 1-year limited manufacturer’s warranty

⚠️ Important safety notice

This light is rated IP20, which means it offers no protection against water or moisture. Keep it well away from reservoirs, trays, run-off, misters, foggers and anywhere it could be sprayed, splashed or dripped on. Grow tents and rooms can get very humid, so position it with care and never use it in wet or condensing conditions. Mains-voltage wiring should be done by a qualified electrician.

 

Related products