Inline Tap Adaptor

male adaptor

Inline Tap Adaptor screws into Inline Tap to attach to piping.  Male fitting.

Inline Tap Adaptor fittings are made of black nylon, which is a tough and durable material. The reason these fittings are made black is to ensure the maximum resistance to UV degradation and to prevent the egress of red light into the pipe which could promote algae development.

These fittings have been tried and tested for over 35 years in the harsh South African sun and are still going strong.

Fittings are designed for use on polyethylene pipe manufactured to SABS-533 specifications (class 3 or class 6). When properly used with this specification of pipe, these fittings will not increase the pipe diameter by more than 10% as recommended by the South African Bureau of Standards. Any additional increase in pipe diameter beyond this can cause stress cracking, especially in pipe not made to specification or of inferior quality. These fittings are manufactured with a unique (and registered) barb configuration which is designed to take maximum advantage of the memory of polyethylene pipe, making it possible for the pipe to return to it’s original size between barbs and thus maximising the effectivity of the barbs and improving the strength of the join. 

RAM Mixed Flow Inline Fans

RAM Mixed Flow Inline Fans

The RAM Mixed Flow Inline Fans are small, quiet running fans which are optimized for high pressure and low noise air movement. Easy to operate and even easier to install, with an integral mounting bracket and fitted with an IEC socket for plug and play operation. These fans also have a very clever quick release “fast clean” system, where you can easily access the fan without disconnecting the unit for your ducting.

Also in our shop!

 

It’s excellent value and easy to set up (plug & play!). You don’t need to wire your fan in either (power lead included).

  • Plug & Play: No fan wiring + power lead included
  • 2-speed settings (no controller needed)
  • Fast clean: Quick-release fan mechanism for easy cleaning & maintenance of fan
  • Featuring Fast Clean – the RAM Mixed Flow Inline Fans features a release system for easy cleaning and maintenance.
  • Mixed flow ABS impeller
  • 2 Speed motor (Low and High Speed Switch)
  • Quiet Operation
  • To be used with ducting

RAM Mixed-Flow Inline Fans Tech Spec

100mm  150mm 200mm
Op. temp range 20⁰C – 50⁰C 20⁰C – 50⁰C 20⁰C – 50⁰C
Protection class IP44 IP44 IP44
Impeller ABS ABS ABS
Variable Speed: Power consumption 25W 48W 123W
Variable Speed: Current (A) 0.11 0.20 0.52
Variable Speed: RPM 1900 2050 1900
Variable Speed: Airflow 165m3/h 398m3/h 690m3/h
High Speed: Power consumption 28W 54W 125W
High Speed: Current (A) 0.12  0.23 0.57
High Speed: RPM 2210 2550 2300
High Speed: Airflow 199m3/h 517m3/h 840m3/h

Having the right ventilation set-up is vitally important to controlling temperature and humidity. Problems like disease, poor growth, yields and pest control issues are associated with a lack in control of these two factors. Ensuring there is a good supply of fresh air in indoor growing areas can be the difference between success and failure and therefore a need for the element of control.

When growing in an enclosed space, we advise using both an extractor fan and an intake fan. The extractor will remove the moist, warm air (high humidity) along with other respiratory by-products and helps to replenish carbon dioxide. The intake fan should be placed at the opposite end of the growing environment to help control humidity and temperature and introduce carbon dioxide into the area.

By making sure that you have the right filter, fan and ducting combination, you can save time, money and effort in the long-run. Measuring up your room correctly is highly important to ensure that the correct ventilation system is chosen and its subsequent success of maintaining an efficient growing area.

 

Inline Filter

Inline Filter

The Inline filter is designed specifically for use in low volume, low pressure systems.

It has only one filter screen available.  The cartridge is made of plastic and is designed to trap any particles that would clog up your system. 

The openings in the inline filter cartridge are 1.3mm x 0.5mm which equates approximately to a 20 mesh filter screen in area of opening (0.65mm2).

With the clear barrel it is easy to see if the filter cartridge needs cleaning or is blocked.

If possible try to prevent placing in direct sunlight in order to inhibit fungal growth inside the filter.

The ends conform to the rest of the range of fittings with their unique barb configuration.

Fittings are made of black nylon, which is a tough and durable material. The reason these fittings are made black is to ensure the maximum resistance to UV degradation and to prevent the egress of red light into the pipe which could promote algae development.

These fittings have been tried and tested for over 35 years in the harsh South African sun and are still going strong.

Fittings are designed for use on polyethylene pipe manufactured to SABS-533 specifications (class 3 or class 6). When properly used with this specification of pipe, these fittings will not increase the pipe diameter by more than 10% as recommended by the South African Bureau of Standards. Any additional increase in pipe diameter beyond this can cause stress cracking, especially in pipe not made to specification or of inferior quality. These fittings are manufactured with a unique (and registered) barb configuration which is designed to take maximum advantage of the memory of polyethylene pipe, making it possible for the pipe to return to it’s original size between barbs and thus maximising the effectivity of the barbs and improving the strength of the join.

Garden HighPro Inline Fans

Garden HighPro Inline Fans

Garden HighPro Profan TT Inline Extractor Fans feature clip-off flanges, allowing for easy cleaning once installed. They also have 2 speed settings and an integrated wall-mount footing.

FANS ARE NOT BLACK, BUT A DARK ARMY GREEN / GREY-GREEN OLIVE COLOUR

Fitted with a ZA 3-point plug (90 cm cord length)

Garden HighPro Inline Fans Infographic