Mars Grow Tent 70cm x 70cm x 1.6m

Mars Grow Tent 70cm x 70cm x 1.6m

The Mars Grow Tent 70cm x 70cm x 1.6m is very quick and easy to assemble and comprises of all the useful features you would expect. Provides a practical solution to creating a controlled horticultural environment.

It features top quality double thick Mylar with a 99% efficient reflective surface. The tents collect and then reflect any light emitted outside of the canopy footprint and delivers it directly back to the plant. These tents are designed to reflect the spectrum’s provided by Mars Hydro LED grow lights and other HID grow lights. HID Grow lights such as Metal Halide (MH) and High Pressure Sodium (HPS) lamps can also be used in this grow tent. This special surface easily outperforms any other grow tents available. The Mars Grow Tents are one of the first LED engineered Grow tent specifically for growing with Mars Hydro products.

Features of Mars Grow Tent:

  • Ultra-Reflective Lined Mylar for superior light reflectivity and dispersal.
  • Premium Mylar sides: 2X stronger & thicker than the competition.
  • Vented flaps with screens: helps maintain a light proof environment.
  • Steel construction: Including poles, fixture braces & corners.
  • Supports up to 65Kg fixture for a a safe grow environment.
  • Removable waterproof material floor liner tray: contains spills/water within tent.
  • Completely non-toxic bug and disease resistant ”no off-gassing”.

Step-by-step tent setup video below:

Mars Grow Tent 70cm x 70cm x 1.6m Specifications:
Size of Tent: 70cm x 70cm x 1.6m
Material: Double thick Mylar fabric, all steel frame construction
Vent Size: 2 x 7.5cm, 2 x 15cm, 1 x 20cm
Ventilation System: 1 x 20cm roof mount; 2 x 15cm upper side mount; 3 x 15cm square lower vents
Mesh Window Size: 12.5cm x 30cm
Fixture weight capacity: 65Kg
Fixture hanging system 3 steel bar hanging and bracing system.
Additional Features Included waterproof material floor liner tray

Reflective Mylar Tent Skin

Full steel frame with fixture mounts

Assembly instruction & users guide

USAGE NOTES AND WARNINGS

Please read through all instructions. If grow tent is improperly installed and/or maintained, there is potential for damage or possible injury or death.

Assemble correctly to avoid tent tipping over and causing injury.

Use extreme care when handling sharp object in or around tent.

Do not place grow tent near a deck, stairs, chair, or other unsafe structure.

Do not hang equipment on or from grow tent that is above the supported weight range.

Keep electrical wires safely away from equipment and areas in and or around the tent that may collect water.

Do not expose grow tent to direct sunlight, near an open flame, or a heat source.

Do not use your grow tent if any part of your tent material is cracked, ripped, or broken.

Do not permit children to play on, in, or around grow tent.

Provide proper air circulation in your grow tent to prevent air from going stale.

Mars Grow Tent 2.4m x 1.2m x 2m

Mars Grow Tent 2.4m x 1.2m x 2m

The Mars Grow Tent 2.4m x 1.2m x 2m is very quick and easy to assemble and comprises of all the useful features you would expect. Provides a practical solution to creating a controlled horticultural environment.

It features top quality double thick Mylar with a 99% efficient reflective surface. The tents collect and then reflect any light emitted outside of the canopy footprint and delivers it directly back to the plant. These tents are designed to reflect the spectrum’s provided by Mars Hydro LED grow lights and other HID grow lights. HID Grow lights such as Metal Halide (MH) and High Pressure Sodium (HPS) lamps can also be used in this grow tent. This special surface easily outperforms any other grow tents available. The Mars Grow Tents are one of the first LED engineered Grow tent specifically for growing with Mars Hydro products.

Features of Mars Grow Tent:

  • Ultra-Reflective Lined Mylar for superior light reflectivity and dispersal.
  • Premium Mylar sides: 2X stronger & thicker than the competition.
  • Vented flaps with screens: helps maintain a light proof environment.
  • Steel construction: Including poles, fixture braces & corners.
  • Supports up to 65Kg fixture for a a safe grow environment.
  • Removable waterproof material floor liner tray: contains spills/water within tent.
  • Completely non-toxic bug and disease resistant ”no off-gassing”.

Step-by-step tent setup video below:

Mars Grow Tent 2.4m x 1.2m x 2m Specifications:
Material: Double thick Mylar fabric, all steel frame construction
Vent Size: 4 x 7.5cm, 2 x 20cm, 4 x 25cm
Ventilation System: 1 x 20cm roof mount; 2 x 15cm upper side mount; 3 x 15cm square lower vents;
Mesh Window Size: 12.5cm x 50cm
Fixture weight capacity: 65Kg
Fixture hanging system 3 steel bar hanging and bracing system.
Additional Features Included waterproof material floor liner tray

Reflective Mylar Tent Skin

Full steel frame with fixture mounts

Assembly instruction & users guide

USAGE NOTES AND WARNINGS

Please read through all instructions. If grow tent is improperly installed and/or maintained, there is potential for damage or possible injury or death.

Assemble correctly to avoid tent tipping over and causing injury.

Use extreme care when handling sharp object in or around tent.

Do not place grow tent near a deck, stairs, chair, or other unsafe structure.

Do not hang equipment on or from grow tent that is above the supported weight range.

Keep electrical wires safely away from equipment and areas in and or around the tent that may collect water.

Do not expose grow tent to direct sunlight, near an open flame, or a heat source.

Do not use your grow tent if any part of your tent material is cracked, ripped, or broken.

Do not permit children to play on, in, or around grow tent.

Provide proper air circulation in your grow tent to prevent air from going stale.

Mars Grow Tent 1.2m x 1.2m x 2m

Mars Grow Tent 1.2m x 1.2m x 2m

The Mars Grow Tent 1.2m x 1.2m x 2m is very quick and easy to assemble and comprises of all the useful features you would expect. Provides a practical solution to creating a controlled horticultural environment.

It features top quality double thick Mylar with a 99% efficient reflective surface. The tents collect and then reflect any light emitted outside of the canopy footprint and delivers it directly back to the plant. These tents are designed to reflect the spectrum’s provided by Mars Hydro LED grow lights and other HID grow lights. HID Grow lights such as Metal Halide (MH) and High Pressure Sodium (HPS) lamps can also be used in this grow tent. This special surface easily outperforms any other grow tents available. The Mars Grow Tents are one of the first LED engineered Grow tent specifically for growing with Mars Hydro products.

Features of Mars Grow Tent:

  • Ultra-Reflective Lined Mylar for superior light reflectivity and dispersal.
  • Premium Mylar sides: 2X stronger & thicker than the competition.
  • Vented flaps with screens: helps maintain a light proof environment.
  • Steel construction: Including poles, fixture braces & corners.
  • Supports up to 65Kg fixture for a a safe grow environment.
  • Removable waterproof material floor liner tray: contains spills/water within tent.
  • Completely non-toxic bug and disease resistant ”no off-gassing”.

Step-by-step tent setup video below:

Mars Grow Tent 1.2m x 1.2m x 2m Specifications:
Size of Tent: 1.2m x 1.2m x 2m
Material: Double thick Mylar fabric, all steel frame construction
Vent Size: 2 x 7.5cm, 6 x 20cm,
Ventilation System: 1 x 20cm roof mount; 2 x 15cm upper side mount; 3 x 15cm square lower vents;
Mesh Window Size: 12.5cm x 45cm
Fixture weight capacity: 65Kg
Fixture hanging system 3 steel bar hanging and bracing system.
Additional Features Included waterproof material floor liner tray

Reflective Mylar Tent Skin

Full steel frame with fixture mounts

Assembly instruction & users guide

USAGE NOTES AND WARNINGS

Please read through all instructions. If grow tent is improperly installed and/or maintained, there is potential for damage or possible injury or death.

Assemble correctly to avoid tent tipping over and causing injury.

Use extreme care when handling sharp object in or around tent.

Do not place grow tent near a deck, stairs, chair, or other unsafe structure.

Do not hang equipment on or from grow tent that is above the supported weight range.

Keep electrical wires safely away from equipment and areas in and or around the tent that may collect water.

Do not expose grow tent to direct sunlight, near an open flame, or a heat source.

Do not use your grow tent if any part of your tent material is cracked, ripped, or broken.

Do not permit children to play on, in, or around grow tent.

Provide proper air circulation in your grow tent to prevent air from going stale.

Mars Grow Tent 1.2m x 0.6m x 1.8m

Mars Grow Tent 1.2m x 0.6m x 1.8m

The Mars Grow Tent 1.2m x 0.6m x 1.8m is very quick and easy to assemble and comprises of all the useful features you would expect. Provides a practical solution to creating a controlled horticultural environment.

It features top quality double thick Mylar with a 99% efficient reflective surface. The tents collect and then reflect any light emitted outside of the canopy footprint and delivers it directly back to the plant. These tents are designed to reflect the spectrum’s provided by Mars Hydro LED grow lights and other HID grow lights. HID Grow lights such as Metal Halide (MH) and High Pressure Sodium (HPS) lamps can also be used in this grow tent. This special surface easily outperforms any other grow tents available. The Mars Grow Tents are one of the first LED engineered Grow tent specifically for growing with Mars Hydro products.

Features of Mars Grow Tent:

  • Ultra-Reflective Lined Mylar for superior light reflectivity and dispersal.
  • Premium Mylar sides: 2X stronger & thicker than the competition.
  • Vented flaps with screens: helps maintain a light proof environment.
  • Steel construction: Including poles, fixture braces & corners.
  • Supports up to 65Kg fixture for a a safe grow environment.
  • Removable waterproof material floor liner tray: contains spills/water within tent.
  • Completely non-toxic bug and disease resistant ”no off-gassing”.

Step-by-step tent setup video below:

Mars Grow Tent 1.2m x 0.6m x 1.8m Specifications:
Size of Tent: 1.2m x 0.6m x 1.8m
Material: Double thick Mylar fabric, all steel frame construction
Vent Size: 2 x 7.5cm, 2 x 20cm, 1 x 25cm
Ventilation System: 1 x 20cm roof mount; 2 x 15cm upper side mount; 3 x 15cm square lower vents;
Mesh Window Size: 12.5cm x 45cm
Fixture weight capacity: 65Kg
Fixture hanging system 3 steel bar hanging and bracing system.
Additional Features Included waterproof material floor liner tray

Reflective Mylar Tent Skin

Full steel frame with fixture mounts

Assembly instruction & users guide

USAGE NOTES AND WARNINGS

Please read through all instructions. If grow tent is improperly installed and/or maintained, there is potential for damage or possible injury or death.

Assemble correctly to avoid tent tipping over and causing injury.

Use extreme care when handling sharp object in or around tent.

Do not place grow tent near a deck, stairs, chair, or other unsafe structure.

Do not hang equipment on or from grow tent that is above the supported weight range.

Keep electrical wires safely away from equipment and areas in and or around the tent that may collect water.

Do not expose grow tent to direct sunlight, near an open flame, or a heat source.

Do not use your grow tent if any part of your tent material is cracked, ripped, or broken.

Do not permit children to play on, in, or around grow tent.

Provide proper air circulation in your grow tent to prevent air from going stale.

Mars Grow Tent 2.4m x 2.4m x 2m

Mars Grow Tent 2.4m x 2.4m x 2m

The Mars Grow Tent 2.4m x 2.4m x 2m is very quick and easy to assemble and comprises of all the useful features you would expect. Provides a practical solution to creating a controlled horticultural environment.

It features top quality double thick Mylar with a 99% efficient reflective surface. The tents collect and then reflect any light emitted outside of the canopy footprint and delivers it directly back to the plant. These tents are designed to reflect the spectrum’s provided by Mars Hydro LED grow lights and other HID grow lights. HID Grow lights such as Metal Halide (MH) and High Pressure Sodium (HPS) lamps can also be used in this grow tent. This special surface easily outperforms any other grow tents available. The Mars Grow Tents are one of the first LED engineered Grow tent specifically for growing with Mars Hydro products.

Features of Mars Grow Tent:

  • Ultra-Reflective Lined Mylar for superior light reflectivity and dispersal.
  • Premium Mylar sides: 2X stronger & thicker than the competition.
  • Vented flaps with screens: helps maintain a light proof environment.
  • Steel construction: Including poles, fixture braces & corners.
  • Supports up to 65Kg fixture for a a safe grow environment.
  • Removable waterproof material floor liner tray: contains spills/water within tent.
  • Completely non-toxic bug and disease resistant ”no off-gassing”.

Step-by-step tent setup video below:

Mars Grow Tent 2.4m x 2.4m x 2m Specifications:
Size of Tent: 2.4m x 2.4m x 2m
Material: Double thick Mylar fabric, all steel frame construction
Vent Size: 2 x 7.5cm, 4 x 20cm, 4 x 30cm
Ventilation System: 1 x 20cm roof mount; 2 x 15cm upper side mount; 3 x 15cm square lower vents;
Mesh Window Size: 18cm x 50cm
Fixture weight capacity: 65Kg
Fixture hanging system 3 steel bar hanging and bracing system.
Additional Features Included waterproof material floor liner tray

Reflective Mylar Tent Skin

Full steel frame with fixture mounts

Assembly instruction & users guide

USAGE NOTES AND WARNINGS

Please read through all instructions. If grow tent is improperly installed and/or maintained, there is potential for damage or possible injury or death.

Assemble correctly to avoid tent tipping over and causing injury.

Use extreme care when handling sharp object in or around tent.

Do not place grow tent near a deck, stairs, chair, or other unsafe structure.

Do not hang equipment on or from grow tent that is above the supported weight range.

Keep electrical wires safely away from equipment and areas in and or around the tent that may collect water.

Do not expose grow tent to direct sunlight, near an open flame, or a heat source.

Do not use your grow tent if any part of your tent material is cracked, ripped, or broken.

Do not permit children to play on, in, or around grow tent.

Provide proper air circulation in your grow tent to prevent air from going stale.

Mars Grow Tent 1.5m x 1.5m x 2m

Mars Grow Tent 1.5m x 1.5m x 2m

The Mars Grow Tent 1.5m x 1.5m x 2m is very quick and easy to assemble and comprises of all the useful features you would expect. Provides a practical solution to creating a controlled horticultural environment.

It features top quality double thick Mylar with a 99% efficient reflective surface. The tents collect and then reflect any light emitted outside of the canopy footprint and delivers it directly back to the plant. These tents are designed to reflect the spectrum’s provided by Mars Hydro LED grow lights and other HID grow lights. HID Grow lights such as Metal Halide (MH) and High Pressure Sodium (HPS) lamps can also be used in this grow tent. This special surface easily outperforms any other grow tents available. The Mars Grow Tents are one of the first LED engineered Grow tent specifically for growing with Mars Hydro products.

Features of Mars Grow Tent:

  • Ultra-Reflective Lined Mylar for superior light reflectivity and dispersal.
  • Premium Mylar sides: 2X stronger & thicker than the competition.
  • Vented flaps with screens: helps maintain a light proof environment.
  • Steel construction: Including poles, fixture braces & corners.
  • Supports up to 65Kg fixture for a a safe grow environment.
  • Removable waterproof material floor liner tray: contains spills/water within tent.
  • Completely non-toxic bug and disease resistant ”no off-gassing”.

Step-by-step tent setup video below:

Mars Grow Tent 1.5m x 1.5m x 2m Specifications:
Size of Tent: 1.5m x 1.5m x 2m
Material: Double thick Mylar fabric, all steel frame construction
Vent Size: 2 x 7.5cm, 2 x 20cm, 4 x 25cm
Ventilation System: 1 x 20cm roof mount; 2 x 15cm upper side mount; 3 x 15cm square lower vents;
Mesh Window Size: 17.5cm x 50cm
Fixture weight capacity: 65Kg
Fixture hanging system 3 steel bar hanging and bracing system.
Additional Features Included waterproof material floor liner tray

Reflective Mylar Tent Skin

Removable water-proof floor tray

Full steel frame with fixture mounts

Assembly instruction & users guide

USAGE NOTES AND WARNINGS

Please read through all instructions. If grow tent is improperly installed and/or maintained, there is potential for damage or possible injury or death.

Assemble correctly to avoid tent tipping over and causing injury.

Use extreme care when handling sharp object in or around tent.

Do not place grow tent near a deck, stairs, chair, or other unsafe structure.

Do not hang equipment on or from grow tent that is above the supported weight range.

Keep electrical wires safely away from equipment and areas in and or around the tent that may collect water.

Do not expose grow tent to direct sunlight, near an open flame, or a heat source.

Do not use your grow tent if any part of your tent material is cracked, ripped, or broken.

Do not permit children to play on, in, or around grow tent.

Provide proper air circulation in your grow tent to prevent air from going stale.

BioBizz Grow

BioBizz Grow 2022

BioBizz Bio-Grow is a liquid growth fertilizer which can be applied to most types of soil and substrate mixtures. BioBizz Bio-Grow  is an Organic Nutrient Fertiliser.

BioBizz Bio-Grow activates the bacterial flora in the substrate thanks to it basis of 100% Dutch organic sugar beet extract, commonly known as molasses. Molasses is a syrup that contains sugar. It forms as a by-product of sugar manufacturing using sugar beet or sugar cane. Wheat starch is the other important raw material used for the production of grain alcohol.

Before being fermented, starch is transformed into glucose with the help of enzymes. So, in other words, molasses are a by-product or residue of a natural fermentation process. They differ from other raw materials due to their high betaine content that helps activate micro activity in the soil through a process of organic facilitation. Bio·Grow® contains 70 trace elements and vitamins B1, B2, C, and E. Just like all Biobizz® products it has a low phosphate content, as this substance is considered harmful to our bodies and the environment.

It is not recommended to use Bio Bizz in a Hydroponic system (NFT, DWC etc)

Bio Bizz is recommended for Hand Feeding into Coco Peat or Soil. 

Storage instructions: Store all your Biobizz products in a cool, dry, dark place (away from direct sunlight) with low humidity and an average (room) temperature of 18 degrees. Don´t store them in the fridge.

BioBizz Grow is an all organic growth promoter made from 100% Dutch sugar beet extract. This potent growth formula is a complete fertiliser solution containing everything your plants need. Enriched with 70 trace elements, natural sugars, humic acids, kelp, and vitamins B1, B2, C and E; Bio Grow is one of the best organic growth promoters out there.

BioBizz Bio Grow has an NPK ratio of 4-3-6 and is a well balanced fertiliser. Designed for use with mostly all types of soil, Bio Grow primarily works by activating bacteria in the soil which in turn helps boost the vegetative growth of your plants.

With a high concentration of nitrogen, Bio Grow is most suitable for use during the vegetative stage of development and is perfect for continued use on herbs and leafy greens. However, it can be administered throughout the entire growth period on all plants, and is used by many growers as a plant tonic during the flowering and fruiting stages.

Key features of Bio Grow include:

  • High nitrogen concentration for vigorous vegetative growth
  • An abundance of trace elements, sugars, vitamins and humic acids for healthy plants
  • All-organic complete fertiliser solution made entirely from sugar beet extract
  • Ideal for organic gardeners and those growing in soil or cocopeat.

Our Opinion

BioBizz are a Dutch based company and they have been making great organic fertilisers for well over a decade. As one of the most trusted manufacturers of organic fertilisers, BioBizz products (including Bio-Grow) are ideal for those who like to grow the natural way in soil – recommended.

NPK ratio: 4 – 3 – 6

Mars Grow Tent 1m x 1m x 1.8m

Mars Grow Tent 1m x 1m x 1.8m

The Mars Grow Tent 1m x 1m x 1.8m is very quick and easy to assemble and comprises of all the useful features you would expect. Provides a practical solution to creating a controlled horticultural environment.

It features top quality double thick Mylar with a 99% efficient reflective surface. The tents collect and then reflect any light emitted outside of the canopy footprint and delivers it directly back to the plant. These tents are designed to reflect the spectrum’s provided by Mars Hydro LED grow lights and other HID grow lights. HID Grow lights such as Metal Halide (MH) and High Pressure Sodium (HPS) lamps can also be used in this grow tent. This special surface easily outperforms any other grow tents available. The Mars Grow Tents are one of the first LED engineered Grow tent specifically for growing with Mars Hydro products.

Features of the Mars Grow Tent:

  • Ultra-Reflective Lined Mylar for superior light reflectivity and dispersal.
  • Premium Mylar sides: 2X stronger & thicker than the competition.
  • Vented flaps with screens: helps maintain a light proof environment.
  • Steel construction: Including poles, fixture braces & corners.
  • Supports up to 65Kg fixture for a a safe grow environment.
  • Removable waterproof material floor liner tray: contains spills/water within tent.
  • Completely non-toxic bug and disease resistant ”no off-gassing”.

Step-by-step tent setup video below:

Mars Grow Tent 1m x 1m x 1.8m Specifications:
Size of Tent: 1m x 1m x 1.8m
Material: Double thick Mylar fabric, all steel frame construction
Vent Size: 2 x 7.5cm, 4 x 15cm, 2 x 20cm
Ventilation System: 1 x 20cm roof mount; 2 x 15cm upper side mount; 3 x 15cm square lower vents
Mesh Window Size: 12.5cm x 30cm
Fixture weight capacity: 65Kg
Fixture hanging system 3 steel bar hanging and bracing system.
Additional Features Included waterproof material floor liner tray

Reflective Mylar Tent Skin

Full steel frame with fixture mounts

Assembly instruction & users guide

USAGE NOTES AND WARNINGS

Please read through all instructions. If grow tent is improperly installed and/or maintained, there is potential for damage or possible injury or death.

Assemble correctly to avoid tent tipping over and causing injury.

Use extreme care when handling sharp object in or around tent.

Do not place grow tent near a deck, stairs, chair, or other unsafe structure.

Do not hang equipment on or from grow tent that is above the supported weight range.

Keep electrical wires safely away from equipment and areas in and or around the tent that may collect water.

Do not expose grow tent to direct sunlight, near an open flame, or a heat source.

Do not use your grow tent if any part of your tent material is cracked, ripped, or broken.

Do not permit children to play on, in, or around grow tent.

Provide proper air circulation in your grow tent to prevent air from going stale.

Surgical Scalpels

Surgical Scalpels

Sterile surgical scalpels are used to take cuttings from plants-  fresh Surgical Scalpels need to be used every time that you decide to take new cuttings.

Taking cuttings is one of the most popular ways to propagate a plant. Also referred to as cloning, it offers the ability to get multiple plants that are genetically identical to the mother plant. Many people feel intimidated by the process, and are a bit leery to attempt it. If you are one of those people, relax, it’s a relatively easy process.
What follows are step by step instructions for a simple procedure that works for both hardwood and softwood plants. (NOTE: Not all plants can be cloned in this manner. Some plants are virtually impossible to get cuttings from, even for experts.)

Why Take Cuttings?

There are several reasons that you may want to clone your plant, one being, that it does not require seeds. Cloning may be your only option for obtaining a certain variety of plant when no seeds are available. Another reason is to maintain consistent quality control of your crop. Every seed, like every human being, is slightly different. Aside from identical twins, genetically, no two people are exactly the same. DNA works in plants the same way it does in humans. So if you have a plant that is just what you want it to be, you can take cuttings and have as many perfect clones of your special plant as you want.

Another big factor which makes cloning so popular is that in most cases, it’s much faster than starting from seed. The majority of plant species will produce a rooted, growing plant from a clone before the seeds of the same species can even sprout, saving a lot of time.

What You’ll Need

  • A SINGLE EDGE RAZOR BLADE – Must be sharp!!
  • BACK-UP BLOCK – A piece of Styrofoam, wood or plastic approximately 2″x2″.
  • SHOT GLASS – Or similar small glass or plastic container.
  • GROWING MEDIUM – Jiffys, Rockwool or Oasis cubes, Pro-mix, coconut fiber or one of several other suitable growing media.
  • SEED TRAY WITH CLEAR HUMIDITY DOME
  • ROOTING HORMONE – You will need a good quality gel, liquid or powdered rooting hormone. Although you can use a powdered rooting hormone, in our opinion they are much harder to work with resulting in a reduced success rate.
  • SPRAY BOTTLE WITH WATER
  • RUBBING ALCOHOL
Before You Start

This might sound obvious, but you should only take cuttings from healthy plants. The healthier the mother plant, the better success you will have with your clones. You should take a few more cuttings than you need and then select the best ones to use and dispose of the rest.

You will need to leach the nitrogen out of the mother plant(s) by watering them heavily with pH adjusted water only (no fertilizer) for two or three days before you take the cuttings. This is an important step because the nitrogen stored in the plant will retard rooting.

Decide what you are going to use for growing medium. Most people use Jiffys, Rockwool or Oasis cubes.  You can also use many different mediums successfully. Use plastic cups with holes cut in the bottom to hold coconut fiber, a Perlite & Vermiculite mix or other loose type growing medium. .You will need to pre-soak your growing medium before you start, using pH balanced water. Distilled water is the best thing to use, but any good, chlorine free water source will work. (NOTE: Most growing medium need to be soaked in pH 5.5 to pH 6.5 water. Rockwool needs to be soaked for 24 hours with water adjusted to a pH of 4.5 to 5.5).

Make a hole in the top of the growing medium which is about the same size or a little smaller than the stem of the cutting. You do not want to force the cutting into the growing medium.

It is critical that you sterilize everything before you start, because cuttings are very susceptible to fungus, viruses and diseases until they root. Use rubbing alcohol on your hands, the razor blade and the cutting block. Rinse the shot glass (or whatever you are using) with alcohol, dry it and then fill it 3/4 full with rooting hormone, and set it aside for now.

Work quickly but carefully. When you make the cut that separates the clone from the mother, you must get it into the rooting hormone as quickly as possible to prevent air from getting pulled into the stem. Please be careful not to cut yourself with the razor blade. (The lawyers made us say that).

Take the Cuttings
  1. cutting1Take a growing tip from your plant 3″ to 6″ long with at least one leaf internode, two is better but not always possible. (A leaf internode is where the leaf connects to the stem, See diagram 1).
  2. cutting2With a Sharp single edge razor blade, carefully cut off one or two leaves (or small branches) flush with the stem. (See diagram 2).
  3. cutting3Make a cut approximately 1/4″ below the internode(s) where you just trimmed the leaves. Cut at a 45 to 60 deg. angle. (See diagram 3). Hold the back-up block tightly behind the stem where you are going to cut. This supports the stem and protects your fingers. Make this cut as quick and clean as you can as you do not want to tear or crush the stem.
  4. cutting4Quickly insert the cutting into the rooting hormone (See diagram 4). If you are using a liquid hormone you can let the cutting soak for 30-60 seconds. With a gel type hormone you just dip the cutting and then insert it into the growing medium. If you are using a powdered hormone you need to wet the stem with water and then carefully roll it in the powder.
  5. cutting5Gently insert the cutting into the growing medium (see diagram 5). Do not push the cutting all the way thru the medium. You need to leave room for the roots to develop. Make sure that the cut(s) you made at the leaf internode(s) are below the surface of the growing medium.
  6. Lightly pack the growing medium up against the cutting. Make sure there is good contact between the cutting and the growing medium.
Care and Feeding Instructions

You have successfully taken cuttings. Now the challenge is to keep them alive long enough to root. The cuttings are obviously very vulnerable at this point and must be handled with care. If you follow the steps below you should have few problems.

  1. Once you have your cuttings in the growing medium, mist them with the spray bottle filled with water and place them in the tray. Mist the inside of the clear humidity dome and place the dome over the tray. (NOTE: The cuttings need some ventilation and a couple of small holes in the dome will usually do the trick).
  2. Remove the dome and mist the cuttings 2 or 3 times a day. This keeps the cuttings from drying out and also changes the air under the dome. This step is critical as the cuttings have no way to replenish lost moisture until they develop roots. Mist the inside of the dome and replace on tray. The humidity under the dome needs to be about 90% until roots appear on the cuttings. (NOTE: Be careful that the air under the dome doesn’t get too warm. If it does, you may have to increase the amount of venting, as well as the number of mistings per day). Cuttings need to be kept between 72° and 80° Fahrenheit. Too hot or too cold will inhibit root growth. If you live in a cold climate you may need a heated propagation mat.
  3. The cuttings will require lighting at this time. Dappled sunlight is fine if you are leaving your cuttings outside. Indoors, we recommend  fluorescents. They are cooler and more energy efficient then metal halides and provide equal to superior results. Keep in mind that fluorescent lights don’t penetrate so you must keep the lights 1-2 inches above the plants.If you are using a Metal Halide or High Pressure Sodium fixture you must keep the cuttings much further away (2 – 3 feet away for 175 – 400 watt bulbs and 4 – 6 feet for a 1000 watt bulb).The lights should be turned on for 18 to 24 hours a day.
  4. To water the cuttings we suggest using either plain distilled water or RO (reverse osmosis) water. It is recommended but not absolutely necessary to add a very mild fertilizer such as Olivia’s Cloning Solution or Wilder’s Clone Root Concentrate at this time. You can also use your hydroponic fertilizer at 1/4 strength. Don’t forget to adjust the pH of the water/nutrient solution at 5-5.5 for Rockwool and 5.5-6.5 for most everything else.
  5. Water the cuttings approximately every 2 days unless you live in a very dry climate in which case you will probably need to water every day. Never let the growing medium dry out. Do not let it set in water either, or the stem will rot. A great method for watering the cuttings is to use two trays, one with holes and the other without. Fill the tray without holes about half way with water and then slowly lower the tray with the holes and the cuttings, into it. Let sit for a few moments and then slowly raise the tray back out and let it drain. Small Hydroponic systems are available to automate the watering cycles of the cuttings, greatly reducing the amount of manual labor.
  6. After about a week you can test to see if your plants have started to root. Remove the humidity dome and leave it off for an hour or two. If the plants have not wilted at all then they probably have enough root development to support themselves. If no wilt is noticed leave the dome off. If they are wilted, spray the cuttings and dome and replace the dome on the tray. Once you have determined that the plants can support themselves, stop misting the cuttings and leave the humidity dome off. (NOTE: Once the plants have roots, constant misting can actually be harmful to the plants).
  7. If the lower leaves start to turn yellow and die, don’t worry. This is perfectly normal. It is the plant feeding off of itself to sustain life, moving valuable nutrient and water from the older growth. Do not remove any dead growth until the plant is well rooted. If you remove the dying growth the plant can starve and die completely.
  8. When the cuttings are completely rooted you can move them into your hydroponic system or the soil.
Final Notes

Cloning is easy once you get the hang of it. Just remember that every step must be done properly. Skipping a small, seemingly insignificant step can have very significant consequences. We suggest that the first time you take cuttings, take twice as many as you need. With a little practice this method of propagation should produce a 95 to 100 percent success ratio.

The use of distilled or RO water can drastically increase your success ratio, especially if you don’t have good quality water where you live. Do not continue using distilled water once the plants have gone into the hydroponic system or soil as it can lead to mineral deficiencies. RO or other chlorine/chloramine free water should be used at this time.

This is one tried and true method of propagation that works well on most types of plants. There are several other ways to clone your plants, including, air layering, dividing, and tissue culture. There are even hydroponic systems that do a good job of rooting cuttings using no growing medium at all. Once the cuttings form roots you simply transplant them to whatever growing medium you will be using.

Easy2grow 40 System AQUAValve5 with 8.5L Pots without Tank

Easy2grow 40 System AQUAValve5 with 8.5L Pots without Tank

The Autopot Easy2grow 40 System AQUAValve5 with 8.5L Pots without Tank can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 40 System AQUAValve5 with 8.5L Pots without Tank includes:

1 x 12mm Click-fit tank adaptor & filter
2 x 12mm In-line tap with 4 x 12mm in-line tap adaptor fittings
1 x 12mm Tee Piece
2 x 12mm Elbow
1 x 10 meters 12mm Pipe
20 x 2 Pot tray & lid ( Black )
40 x 8.5L Pots ( Black )
20 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 40 Marix Disks, 40 Square Potsocks, 10 x 12mm – 9mm Cross connectors & 20 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.

Easy2grow 40 System Instructions

 

Easy2grow 100 System AQUAValve5 with 8.5L Pots without Tank

Easy2grow 100 System AQUAValve5 with 8.5L Pots without Tank

The Autopot Easy2grow 100 System AQUAValve5 with 8.5L Pots without Tank can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 100 System AQUAValve5 with 8.5L Pots without Tank includes:

1 x 12mm Click-fit tank adaptor & filter
5 x 12mm In-line tap with 10 x 12mm in-line tap adaptor fittings
1 x 12mm Cross Connector
2 x 12mm Tee Piece
2 x 12mm Elbow
1 x 25 meters 12mm Pipe
50 x 2 Pot tray & lid ( Black )
100 x 8.5L Pots ( Black )
50 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 100 Marix Disks, 100 Square Potsocks, 25 x 12mm – 9mm Cross connectors & 50 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.

Easy2grow 100 System Instructions

 

Easy2grow 100 System AQUAValve5 with 8.5L Pots

Easy2grow 100 System AQUAValve5 with 8.5L Pots

The Autopot Easy2grow 100 System AQUAValve5 with 8.5L Pots can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 100 System AQUAValve5 with 8.5L Pots includes:

1 x 750 ltr FlexiTank
1 x 12mm Click-fit tank adaptor & filter
5 x 12mm In-line tap with 10 x 12mm in-line tap adaptor fittings
1 x 12mm Cross Connector
2 x 12mm Tee Piece
2 x 12mm Elbow
1 x 25 meters 12mm Pipe
50 x 2 Pot tray & lid ( Black )
100 x 8.5L Pots ( Black )
50 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 100 Marix Disks, 100 Square Potsocks, 25 x 12mm – 9mm Cross connectors & 50 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.

Easy2grow 100 System Instructions

 

Easy2grow 24 System AQUAValve5 with 8.5L Pots without Tank

Easy2grow 24 System AQUAValve5 with 8.5L Pots without Tank

The Autopot Easy2grow 24 System AQUAValve5 with 8.5L Pots without Tank can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 24 System AQUAValve5 with 8.5L Pots without Tank includes:

1 x 12mm Click-fit tank adaptor & filter
2 x 12mm In-line tap with 4 x 12mm in-line tap adaptor fittings
1 x 8 meters 12mm Pipe
1 x 12mm Tee Piece
2 x 12mm Elbow
12 x 2 Pot tray & lid ( Black )
24 x 8.5L Pots ( Black )
12 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 24 Marix Disks, 24 Square Potsocks, 6 x 12mm – 9mm Cross connectors & 12 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.

Easy2grow 24 System Instructions

 

Easy2grow 24 System AQUAValve5 with 8.5L Pots

Easy2grow 24 System AQUAValve5 with 8.5L Pots

The Autopot Easy2grow 24 System AQUAValve5 with 8.5L Pots can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 24 System AQUAValve5 with 8.5L Pots includes:

1 x 225 ltr FlexiTank
1 x 12mm Click-fit tank adaptor & filter
2 x 12mm In-line tap with 4 x 12mm in-line tap adaptor fittings
1 x 8 meters 12mm Pipe
1 x 12mm Tee Piece
2 x 12mm Elbow
12 x 2 Pot tray & lid ( Black )
24 x 8.5L Pots ( Black )
12 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 24 Marix Disks, 24 Square Potsocks, 6 x 12mm – 9mm Cross connectors & 12 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.

Easy2grow 24 System Instructions

 

Easy2grow 20 System AQUAValve5 with 8.5L Pots without Tank

Easy2grow 20 System AQUAValve5 with 8.5L Pots without Tank

The Autopot Easy2grow 20 System AQUAValve5 with 8.5L Pots without Tank can be used to grow a wide variety of crops and is ideally suited to either short, bushy varieties like herbs or strawberries, or tall growing vine plants, where multiple kits can be placed end on end in a garden, greenhouse or poly-tunnel.

The new Aquavalve5 has a 66% Bigger Inlet and uses 9mm piping and fittings.

The AutoPot Easy2grow (2 Pot) system is AutoPot’s best selling watering system. It offers maintenance free growing for the greenhouse, polytunnel, garden or home without wasting a single drop of water.

A wide range of growing substrates can be used with the easy2grow system, either traditionally with soil or hydroponically. Low maintenance, reliable and automated; the easy2grow system allows gardeners to relax, go away on holiday and still be sure of healthy plants and bumper harvests.

The Easy2grow System is easily extended by linking more units to a single tank. The pots & trays can be easily moved at will, if the plants grow too large they can be spaced further apart with ease. Once set up and the tank filled with water & liquid feed, this extremely versatile system will completely take care of all your plant’s needs.

Autopot Easy2grow 20 System AQUAValve5 with 8.5L Pots without Tank includes:

1 x 12mm Click-fit tank adaptor & filter
1 x 12mm In-line tap with 2 x 12mm in-line tap adaptor fittings
1 x 6 meters 12mm Pipe
10 x 2 Pot tray & lid ( Black )
20 x 8.5L Pots ( Black )
10 x Autopot Easy2grow (2 Pot) Accessory packs with AQUAVALVE 5. (Incl. 20 Marix Disks, 20 Square Potsocks, 5 x 12mm – 9mm Cross connectors & 10 x 1 meters of 9mm Autopot piping)

Growing Media is sold separately. Use coco coir based substrates of your choice, as coco coir is great at soaking and dispersing water throughout the substrate from the bottom of the pots.

It is also recommended to use about 1lt of LECA (Clay pebbles) to fill the bottom of each pot, before filling up the rest of the pot with your substrate of choice

Other goodies required if you do not have: (Mineral) Nutrients, pH Up, pH Down and pH Test kit or pH Meter.

Easy2grow 20 System Instructions